From: Neil Armstrong <narmstrong@baylibre.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH u-boot 3/3] arm: amlogic: p212: Add support for Ethernet with Internal PHY Date: Wed, 18 Oct 2017 10:02:12 +0200 [thread overview] Message-ID: <1508313732-19282-4-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1508313732-19282-1-git-send-email-narmstrong@baylibre.com> This patch adds support for the Internal RMII Ethernet PHY on the Amlogic P212 Reference Board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- board/amlogic/p212/p212.c | 39 ++++++++++++++++++++++++++++++++++++++- configs/p212_defconfig | 4 ++++ include/configs/p212.h | 2 ++ 3 files changed, 44 insertions(+), 1 deletion(-) diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c index 1eeb7f2..ece8096 100644 --- a/board/amlogic/p212/p212.c +++ b/board/amlogic/p212/p212.c @@ -9,6 +9,13 @@ #include <dm.h> #include <asm/io.h> #include <asm/arch/gxbb.h> +#include <asm/arch/sm.h> +#include <phy.h> + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 int board_init(void) { @@ -17,5 +24,35 @@ int board_init(void) int misc_init_r(void) { - return 0; + u8 mac_addr[EFUSE_MAC_SIZE]; + char serial[EFUSE_SN_SIZE]; + ssize_t len; + + /* Set RMII mode */ + out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK | + GXBB_ETH_REG_0_CLK_EN); + + /* Use Internal PHY */ + out_le32(GXBB_ETH_REG_2, 0x10110181); + out_le32(GXBB_ETH_REG_3, 0xe40908ff); + + /* Enable power and clock gate */ + setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); + clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); + + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + } + + if (!env_get("serial#")) { + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, + EFUSE_SN_SIZE); + if (len == EFUSE_SN_SIZE) + env_set("serial#", serial); + } + + return 0; } diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 3c57621..d4b5349 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -20,6 +20,10 @@ CONFIG_OF_CONTROL=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PHY_MESON_GXL=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_PINCTRL=y CONFIG_PINCTRL_MESON_GXL=y CONFIG_DEBUG_UART_MESON=y diff --git a/include/configs/p212.h b/include/configs/p212.h index 0477384..793b556 100644 --- a/include/configs/p212.h +++ b/include/configs/p212.h @@ -12,6 +12,8 @@ #define CONFIG_MISC_INIT_R +#define CONFIG_PHY_ADDR 8 + /* Serial setup */ #define CONFIG_CONS_INDEX 0 -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong) To: linus-amlogic@lists.infradead.org Subject: [PATCH u-boot 3/3] arm: amlogic: p212: Add support for Ethernet with Internal PHY Date: Wed, 18 Oct 2017 10:02:12 +0200 [thread overview] Message-ID: <1508313732-19282-4-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1508313732-19282-1-git-send-email-narmstrong@baylibre.com> This patch adds support for the Internal RMII Ethernet PHY on the Amlogic P212 Reference Board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- board/amlogic/p212/p212.c | 39 ++++++++++++++++++++++++++++++++++++++- configs/p212_defconfig | 4 ++++ include/configs/p212.h | 2 ++ 3 files changed, 44 insertions(+), 1 deletion(-) diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c index 1eeb7f2..ece8096 100644 --- a/board/amlogic/p212/p212.c +++ b/board/amlogic/p212/p212.c @@ -9,6 +9,13 @@ #include <dm.h> #include <asm/io.h> #include <asm/arch/gxbb.h> +#include <asm/arch/sm.h> +#include <phy.h> + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 int board_init(void) { @@ -17,5 +24,35 @@ int board_init(void) int misc_init_r(void) { - return 0; + u8 mac_addr[EFUSE_MAC_SIZE]; + char serial[EFUSE_SN_SIZE]; + ssize_t len; + + /* Set RMII mode */ + out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK | + GXBB_ETH_REG_0_CLK_EN); + + /* Use Internal PHY */ + out_le32(GXBB_ETH_REG_2, 0x10110181); + out_le32(GXBB_ETH_REG_3, 0xe40908ff); + + /* Enable power and clock gate */ + setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); + clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); + + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + } + + if (!env_get("serial#")) { + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, + EFUSE_SN_SIZE); + if (len == EFUSE_SN_SIZE) + env_set("serial#", serial); + } + + return 0; } diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 3c57621..d4b5349 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -20,6 +20,10 @@ CONFIG_OF_CONTROL=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PHY_MESON_GXL=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_PINCTRL=y CONFIG_PINCTRL_MESON_GXL=y CONFIG_DEBUG_UART_MESON=y diff --git a/include/configs/p212.h b/include/configs/p212.h index 0477384..793b556 100644 --- a/include/configs/p212.h +++ b/include/configs/p212.h @@ -12,6 +12,8 @@ #define CONFIG_MISC_INIT_R +#define CONFIG_PHY_ADDR 8 + /* Serial setup */ #define CONFIG_CONS_INDEX 0 -- 2.7.4
next prev parent reply other threads:[~2017-10-18 8:02 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-18 8:02 [U-Boot] [PATCH u-boot 0/3] Add Ethernet support for Amlogic P212 Reference board Neil Armstrong 2017-10-18 8:02 ` Neil Armstrong 2017-10-18 8:02 ` [U-Boot] [PATCH u-boot 1/3] net: phy: Add Amlogic Meson GXL Internal PHY support Neil Armstrong 2017-10-18 8:02 ` Neil Armstrong 2017-10-22 14:36 ` [U-Boot] " Simon Glass 2017-10-22 14:36 ` Simon Glass 2017-10-26 13:39 ` [U-Boot] " Neil Armstrong 2017-10-26 13:39 ` Neil Armstrong 2017-10-29 12:04 ` [U-Boot] " Tom Rini 2017-10-29 12:04 ` Tom Rini 2017-10-29 14:47 ` [U-Boot] " Neil Armstrong 2017-10-29 14:47 ` Neil Armstrong 2017-11-17 15:43 ` [U-Boot] [U-Boot, u-boot, " Tom Rini 2017-11-17 15:43 ` Tom Rini 2017-10-18 8:02 ` [U-Boot] [PATCH u-boot 2/3] arm: meson: Add supplementary ethernet registers definitions Neil Armstrong 2017-10-18 8:02 ` Neil Armstrong 2017-11-17 15:43 ` [U-Boot] [U-Boot, u-boot, " Tom Rini 2017-11-17 15:43 ` Tom Rini 2017-10-18 8:02 ` Neil Armstrong [this message] 2017-10-18 8:02 ` [PATCH u-boot 3/3] arm: amlogic: p212: Add support for Ethernet with Internal PHY Neil Armstrong 2017-11-17 15:43 ` [U-Boot] [U-Boot, u-boot, " Tom Rini 2017-11-17 15:43 ` Tom Rini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1508313732-19282-4-git-send-email-narmstrong@baylibre.com \ --to=narmstrong@baylibre.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.