All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keerthy <j-keerthy@ti.com>
To: <tony@atomide.com>
Cc: <linux-arm-kernel@lists.infradead.org>, <rnayak@codeaurora.org>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<j-keerthy@ti.com>, <t-kristo@ti.com>
Subject: [PATCH] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
Date: Fri, 10 Nov 2017 16:56:52 +0530	[thread overview]
Message-ID: <1510313212-29660-1-git-send-email-j-keerthy@ti.com> (raw)

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm/mach-omap2/prm33xx.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index bc5df8d..dfca8d9 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -386,7 +375,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: tony@atomide.com
Cc: rnayak@codeaurora.org, j-keerthy@ti.com,
	linux-kernel@vger.kernel.org, t-kristo@ti.com,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
Date: Fri, 10 Nov 2017 16:56:52 +0530	[thread overview]
Message-ID: <1510313212-29660-1-git-send-email-j-keerthy@ti.com> (raw)

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm/mach-omap2/prm33xx.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index bc5df8d..dfca8d9 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -386,7 +375,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: j-keerthy@ti.com (Keerthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
Date: Fri, 10 Nov 2017 16:56:52 +0530	[thread overview]
Message-ID: <1510313212-29660-1-git-send-email-j-keerthy@ti.com> (raw)

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm/mach-omap2/prm33xx.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index bc5df8d..dfca8d9 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -386,7 +375,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
-- 
1.9.1

             reply	other threads:[~2017-11-10 11:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-10 11:26 Keerthy [this message]
2017-11-10 11:26 ` [PATCH] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function Keerthy
2017-11-10 11:26 ` Keerthy
2017-11-27 16:59 ` Tony Lindgren
2017-11-27 16:59   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1510313212-29660-1-git-send-email-j-keerthy@ti.com \
    --to=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.