All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 4/5] hw/arm/aspeed: Unlock SCU when running kernel
Date: Mon, 20 Nov 2017 17:37:23 +0000	[thread overview]
Message-ID: <1511199444-17922-5-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1511199444-17922-1-git-send-email-peter.maydell@linaro.org>

From: Joel Stanley <joel@jms.id.au>

The ASPEED hardware contains a lock register for the SCU that disables
any writes to the SCU when it is locked. The machine comes up with the
lock enabled, but on all known hardware u-boot will unlock it and leave
it unlocked when loading the kernel.

This means the kernel expects the SCU to be unlocked. When booting from
an emulated ROM the normal u-boot unlock path is executed. Things don't
go well when booting using the -kernel command line, as u-boot does not
run first.

Change behaviour so that when a kernel is passed to the machine, set the
reset value of the SCU to be unlocked.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20171114122018.12204-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/misc/aspeed_scu.h | 3 +++
 hw/arm/aspeed.c              | 9 +++++++++
 hw/arm/aspeed_soc.c          | 2 ++
 hw/misc/aspeed_scu.c         | 5 +++--
 4 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index bd4ac01..d70cc0a 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -29,6 +29,7 @@ typedef struct AspeedSCUState {
     uint32_t silicon_rev;
     uint32_t hw_strap1;
     uint32_t hw_strap2;
+    uint32_t hw_prot_key;
 } AspeedSCUState;
 
 #define AST2400_A0_SILICON_REV   0x02000303U
@@ -38,6 +39,8 @@ typedef struct AspeedSCUState {
 
 extern bool is_supported_silicon_rev(uint32_t silicon_rev);
 
+#define ASPEED_SCU_PROT_KEY      0x1688A8A8
+
 /*
  * Extracted from Aspeed SDK v00.03.21. Fixes and extra definitions
  * were added.
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index ab895ad..7088c90 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -186,6 +186,15 @@ static void aspeed_board_init(MachineState *machine,
                             &error_abort);
     object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
                             &error_abort);
+    if (machine->kernel_filename) {
+        /*
+         * When booting with a -kernel command line there is no u-boot
+         * that runs to unlock the SCU. In this case set the default to
+         * be unlocked as the kernel expects
+         */
+        object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
+                                "hw-prot-key", &error_abort);
+    }
     object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
                              &error_abort);
 
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index 5aa3d2d..c83b7e2 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -154,6 +154,8 @@ static void aspeed_soc_init(Object *obj)
                               "hw-strap1", &error_abort);
     object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
                               "hw-strap2", &error_abort);
+    object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu),
+                              "hw-prot-key", &error_abort);
 
     object_initialize(&s->fmc, sizeof(s->fmc), sc->info->fmc_typename);
     object_property_add_child(obj, "fmc", OBJECT(&s->fmc), NULL);
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index 95022d3..74537ce 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -85,7 +85,6 @@
 #define BMC_REV              TO_REG(0x19C)
 #define BMC_DEV_ID           TO_REG(0x1A4)
 
-#define PROT_KEY_UNLOCK 0x1688A8A8
 #define SCU_IO_REGION_SIZE 0x1000
 
 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
@@ -192,7 +191,7 @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
     }
 
     if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
-            s->regs[PROT_KEY] != PROT_KEY_UNLOCK) {
+            s->regs[PROT_KEY] != ASPEED_SCU_PROT_KEY) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
         return;
     }
@@ -246,6 +245,7 @@ static void aspeed_scu_reset(DeviceState *dev)
     s->regs[SILICON_REV] = s->silicon_rev;
     s->regs[HW_STRAP1] = s->hw_strap1;
     s->regs[HW_STRAP2] = s->hw_strap2;
+    s->regs[PROT_KEY] = s->hw_prot_key;
 }
 
 static uint32_t aspeed_silicon_revs[] = {
@@ -299,6 +299,7 @@ static Property aspeed_scu_properties[] = {
     DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
     DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
     DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
+    DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.7.4

  parent reply	other threads:[~2017-11-20 17:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-20 17:37 [Qemu-devel] [PULL 0/5] target-arm queue for rc2 Peter Maydell
2017-11-20 17:37 ` [Qemu-devel] [PULL 1/5] target/arm: Report GICv3 sysregs present in ID registers if needed Peter Maydell
2017-11-20 17:37 ` [Qemu-devel] [PULL 2/5] nvic: Fix ARMv7M MPU_RBAR reads Peter Maydell
2017-11-20 17:37 ` [Qemu-devel] [PULL 3/5] arm: check regime, not current state, for ATS write PAR format Peter Maydell
2017-11-20 17:37 ` Peter Maydell [this message]
2017-11-20 17:37 ` [Qemu-devel] [PULL 5/5] hw/arm: Silence xlnx-ep108 deprecation warning during tests Peter Maydell
2017-11-21 10:44 ` [Qemu-devel] [PULL 0/5] target-arm queue for rc2 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1511199444-17922-5-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.