From: Stefan Riedmueller <s.riedmueller@phytec.de> To: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, Stefan Riedmueller <s.riedmueller@phytec.de>, robh+dt@kernel.org, Christian Hemp <c.hemp@phytec.de>, Stefan Christ <s.christ@phytec.de>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/6] ARM: dts: imx6: Add support for phxBOARD-Mira i.MX 6 DualLight/Solo RDK Date: Tue, 19 Dec 2017 16:49:46 +0100 [thread overview] Message-ID: <1513698588-13325-5-git-send-email-s.riedmueller@phytec.de> (raw) In-Reply-To: <1513698588-13325-1-git-send-email-s.riedmueller@phytec.de> From: Christian Hemp <c.hemp@phytec.de> Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 +++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b793617..07d99a1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -388,6 +388,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000..f56c20f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; + compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6dl"; + + chosen { + linux,stdout-path = &uart2; + }; +}; + +ðphy { + max-speed = <100>; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: s.riedmueller@phytec.de (Stefan Riedmueller) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/6] ARM: dts: imx6: Add support for phxBOARD-Mira i.MX 6 DualLight/Solo RDK Date: Tue, 19 Dec 2017 16:49:46 +0100 [thread overview] Message-ID: <1513698588-13325-5-git-send-email-s.riedmueller@phytec.de> (raw) In-Reply-To: <1513698588-13325-1-git-send-email-s.riedmueller@phytec.de> From: Christian Hemp <c.hemp@phytec.de> Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 +++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b793617..07d99a1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -388,6 +388,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000..f56c20f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; + compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6dl"; + + chosen { + linux,stdout-path = &uart2; + }; +}; + +ðphy { + max-speed = <100>; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; -- 2.7.4
next prev parent reply other threads:[~2017-12-19 15:49 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-12-19 15:49 [PATCH 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller 2017-12-19 15:49 ` [PATCH 1/6] ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller [not found] ` <1513698588-13325-2-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:03 ` Fabio Estevam 2017-12-19 17:03 ` Fabio Estevam 2017-12-19 15:49 ` [PATCH 2/6] ARM: dts: imx6: Add initial support for phyBOARD-Mira Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller [not found] ` <1513698588-13325-3-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:10 ` Fabio Estevam 2017-12-19 17:10 ` Fabio Estevam [not found] ` <CAOMZO5CSQSpPXTnR69HqHfKZiUpi+eqonqjuEu9mgBECsWG_5g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-12-19 17:22 ` Christoph Fritz 2017-12-19 17:22 ` Christoph Fritz 2017-12-19 15:49 ` [PATCH 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller [not found] ` <1513698588-13325-4-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:12 ` Fabio Estevam 2017-12-19 17:12 ` Fabio Estevam 2017-12-19 15:49 ` Stefan Riedmueller [this message] 2017-12-19 15:49 ` [PATCH 4/6] ARM: dts: imx6: Add support for phxBOARD-Mira i.MX 6 DualLight/Solo RDK Stefan Riedmueller [not found] ` <1513698588-13325-5-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:14 ` Fabio Estevam 2017-12-19 17:14 ` Fabio Estevam 2017-12-19 15:49 ` [PATCH 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller [not found] ` <1513698588-13325-6-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:15 ` Fabio Estevam 2017-12-19 17:15 ` Fabio Estevam 2017-12-19 15:49 ` [PATCH 6/6] ARM: imx_v6_v7_defconfig: Enable Dialog Semicondocter DA9062 driver Stefan Riedmueller 2017-12-19 15:49 ` Stefan Riedmueller [not found] ` <1513698588-13325-7-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2017-12-19 17:16 ` Fabio Estevam 2017-12-19 17:16 ` Fabio Estevam [not found] ` <CAOMZO5CyMoY+24ub09Lp4VHFn=O6FqFELfQzH-WDv1H9OweoHw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-12-19 17:32 ` Fabio Estevam 2017-12-19 17:32 ` Fabio Estevam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1513698588-13325-5-git-send-email-s.riedmueller@phytec.de \ --to=s.riedmueller@phytec.de \ --cc=c.hemp@phytec.de \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=s.christ@phytec.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.