From: Daniel Baluta <daniel.baluta@nxp.com> To: <broonie@kernel.org>, <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>, <andy.shevchenko@gmail.com>, <fabio.estevam@nxp.com> Cc: <linux-kernel@vger.kernel.org>, <wakasugi.jb@om.asahi-kasei.co.jp>, <shengjiu.wang@nxp.com>, <daniel.baluta@nxp.com>, <mihai.serban@gmail.com>, <cosmin.samoila@nxp.com>, <linux-imx@nxp.com>, <daniel.baluta@gmail.com> Subject: [PATCH v2 2/2] ASoC: ak5558: Add bindings for AK5558 ADC Date: Fri, 2 Feb 2018 18:20:06 +0200 [thread overview] Message-ID: <1517588406-3295-3-git-send-email-daniel.baluta@nxp.com> (raw) In-Reply-To: <1517588406-3295-1-git-send-email-daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- Documentation/devicetree/bindings/sound/ak5558.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..61c85568 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,23 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device for I2C. + +Optional properties: + +- reset-gpios: A GPIO specifier for the GPIO controlling + the power down & reset pin. + +Example: + +&i2c { + ak5558: ak5558@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Baluta <daniel.baluta@nxp.com> To: broonie@kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, andy.shevchenko@gmail.com, fabio.estevam@nxp.com Cc: daniel.baluta@gmail.com, shengjiu.wang@nxp.com, linux-kernel@vger.kernel.org, wakasugi.jb@om.asahi-kasei.co.jp, linux-imx@nxp.com, cosmin.samoila@nxp.com, daniel.baluta@nxp.com, mihai.serban@gmail.com Subject: [PATCH v2 2/2] ASoC: ak5558: Add bindings for AK5558 ADC Date: Fri, 2 Feb 2018 18:20:06 +0200 [thread overview] Message-ID: <1517588406-3295-3-git-send-email-daniel.baluta@nxp.com> (raw) In-Reply-To: <1517588406-3295-1-git-send-email-daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- Documentation/devicetree/bindings/sound/ak5558.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..61c85568 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,23 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device for I2C. + +Optional properties: + +- reset-gpios: A GPIO specifier for the GPIO controlling + the power down & reset pin. + +Example: + +&i2c { + ak5558: ak5558@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; +}; -- 2.7.4
next prev parent reply other threads:[~2018-02-02 20:34 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-02-02 16:20 [PATCH v2 0/2] Add support for AK5558 ADC Daniel Baluta 2018-02-02 16:20 ` Daniel Baluta 2018-02-02 16:20 ` [PATCH v2 1/2] ASoC: codecs: Add support for AK5558 ADC driver Daniel Baluta 2018-02-02 16:20 ` Daniel Baluta 2018-02-02 19:33 ` Andy Shevchenko 2018-02-02 19:33 ` Andy Shevchenko 2018-02-02 23:11 ` Mark Brown 2018-02-02 23:11 ` Mark Brown 2018-02-04 14:31 ` Andy Shevchenko 2018-02-04 14:31 ` Andy Shevchenko 2018-02-04 14:42 ` Daniel Baluta 2018-02-04 14:42 ` Daniel Baluta 2018-02-02 16:20 ` Daniel Baluta [this message] 2018-02-02 16:20 ` [PATCH v2 2/2] ASoC: ak5558: Add bindings for AK5558 ADC Daniel Baluta 2018-02-02 22:48 ` [alsa-devel] " Fabio Estevam 2018-02-05 6:09 ` Rob Herring 2018-02-05 6:09 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1517588406-3295-3-git-send-email-daniel.baluta@nxp.com \ --to=daniel.baluta@nxp.com \ --cc=alsa-devel@alsa-project.org \ --cc=andy.shevchenko@gmail.com \ --cc=broonie@kernel.org \ --cc=cosmin.samoila@nxp.com \ --cc=daniel.baluta@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mihai.serban@gmail.com \ --cc=shengjiu.wang@nxp.com \ --cc=wakasugi.jb@om.asahi-kasei.co.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.