From: Govind Singh <govinds@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rakesh Pillai <pillair@codeaurora.org>, Govind Singh <govinds@codeaurora.org> Subject: [PATCH 10/13] ath10k: Add support to get target info from hif ops Date: Thu, 15 Feb 2018 14:20:03 +0530 [thread overview] Message-ID: <1518684603-5812-1-git-send-email-govinds@codeaurora.org> (raw) From: Rakesh Pillai <pillair@codeaurora.org> wcn3990 does not use bmi. Add support to get target info from hif ops. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++ drivers/net/wireless/ath/ath10k/hif.h | 13 +++++++++++++ drivers/net/wireless/ath/ath10k/snoc.c | 10 ++++++++++ 3 files changed, 31 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 51444d3..bcce875 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2437,6 +2437,14 @@ static int ath10k_core_probe_fw(struct ath10k *ar) ar->hw->wiphy->hw_version = target_info.version; break; case ATH10K_BUS_SNOC: + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_hif_get_target_info(ar, &target_info); + if (ret) { + ath10k_err(ar, "could not get target info (%d)\n", ret); + goto err_power_down; + } + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; break; default: ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus); diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h index 7abb13c..1a59ea0 100644 --- a/drivers/net/wireless/ath/ath10k/hif.h +++ b/drivers/net/wireless/ath/ath10k/hif.h @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include "core.h" +#include "bmi.h" #include "debug.h" struct ath10k_hif_sg_item { @@ -93,6 +94,9 @@ struct ath10k_hif_ops { /* fetch calibration data from target eeprom */ int (*fetch_cal_eeprom)(struct ath10k *ar, void **data, size_t *data_len); + + int (*get_target_info)(struct ath10k *ar, + struct bmi_target_info *target_info); }; static inline int ath10k_hif_tx_sg(struct ath10k *ar, u8 pipe_id, @@ -218,4 +222,13 @@ static inline int ath10k_hif_fetch_cal_eeprom(struct ath10k *ar, return ar->hif.ops->fetch_cal_eeprom(ar, data, data_len); } +static inline int ath10k_hif_get_target_info(struct ath10k *ar, + struct bmi_target_info *tgt_info) +{ + if (!ar->hif.ops->get_target_info) + return -EOPNOTSUPP; + + return ar->hif.ops->get_target_info(ar, tgt_info); +} + #endif /* _HIF_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index 6d9ccce..1ef0d3b 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -528,6 +528,15 @@ static int ath10k_snoc_hif_tx_sg(struct ath10k *ar, u8 pipe_id, return err; } +static int ath10k_snoc_hif_get_target_info(struct ath10k *ar, + struct bmi_target_info *target_info) +{ + target_info->version = ATH10K_HW_WCN3990; + target_info->type = ATH10K_HW_WCN3990; + + return 0; +} + static u16 ath10k_snoc_hif_get_free_queue_number(struct ath10k *ar, u8 pipe) { struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); @@ -787,6 +796,7 @@ static int ath10k_snoc_hif_power_up(struct ath10k *ar) .tx_sg = ath10k_snoc_hif_tx_sg, .send_complete_check = ath10k_snoc_hif_send_complete_check, .get_free_queue_number = ath10k_snoc_hif_get_free_queue_number, + .get_target_info = ath10k_snoc_hif_get_target_info, }; static const struct ath10k_bus_ops ath10k_snoc_bus_ops = { -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Govind Singh <govinds@codeaurora.org> To: ath10k@lists.infradead.org Cc: Rakesh Pillai <pillair@codeaurora.org>, Govind Singh <govinds@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH 10/13] ath10k: Add support to get target info from hif ops Date: Thu, 15 Feb 2018 14:20:03 +0530 [thread overview] Message-ID: <1518684603-5812-1-git-send-email-govinds@codeaurora.org> (raw) From: Rakesh Pillai <pillair@codeaurora.org> wcn3990 does not use bmi. Add support to get target info from hif ops. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++ drivers/net/wireless/ath/ath10k/hif.h | 13 +++++++++++++ drivers/net/wireless/ath/ath10k/snoc.c | 10 ++++++++++ 3 files changed, 31 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 51444d3..bcce875 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2437,6 +2437,14 @@ static int ath10k_core_probe_fw(struct ath10k *ar) ar->hw->wiphy->hw_version = target_info.version; break; case ATH10K_BUS_SNOC: + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_hif_get_target_info(ar, &target_info); + if (ret) { + ath10k_err(ar, "could not get target info (%d)\n", ret); + goto err_power_down; + } + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; break; default: ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus); diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h index 7abb13c..1a59ea0 100644 --- a/drivers/net/wireless/ath/ath10k/hif.h +++ b/drivers/net/wireless/ath/ath10k/hif.h @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include "core.h" +#include "bmi.h" #include "debug.h" struct ath10k_hif_sg_item { @@ -93,6 +94,9 @@ struct ath10k_hif_ops { /* fetch calibration data from target eeprom */ int (*fetch_cal_eeprom)(struct ath10k *ar, void **data, size_t *data_len); + + int (*get_target_info)(struct ath10k *ar, + struct bmi_target_info *target_info); }; static inline int ath10k_hif_tx_sg(struct ath10k *ar, u8 pipe_id, @@ -218,4 +222,13 @@ static inline int ath10k_hif_fetch_cal_eeprom(struct ath10k *ar, return ar->hif.ops->fetch_cal_eeprom(ar, data, data_len); } +static inline int ath10k_hif_get_target_info(struct ath10k *ar, + struct bmi_target_info *tgt_info) +{ + if (!ar->hif.ops->get_target_info) + return -EOPNOTSUPP; + + return ar->hif.ops->get_target_info(ar, tgt_info); +} + #endif /* _HIF_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index 6d9ccce..1ef0d3b 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -528,6 +528,15 @@ static int ath10k_snoc_hif_tx_sg(struct ath10k *ar, u8 pipe_id, return err; } +static int ath10k_snoc_hif_get_target_info(struct ath10k *ar, + struct bmi_target_info *target_info) +{ + target_info->version = ATH10K_HW_WCN3990; + target_info->type = ATH10K_HW_WCN3990; + + return 0; +} + static u16 ath10k_snoc_hif_get_free_queue_number(struct ath10k *ar, u8 pipe) { struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); @@ -787,6 +796,7 @@ static int ath10k_snoc_hif_power_up(struct ath10k *ar) .tx_sg = ath10k_snoc_hif_tx_sg, .send_complete_check = ath10k_snoc_hif_send_complete_check, .get_free_queue_number = ath10k_snoc_hif_get_free_queue_number, + .get_target_info = ath10k_snoc_hif_get_target_info, }; static const struct ath10k_bus_ops ath10k_snoc_bus_ops = { -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2018-02-15 8:50 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-02-15 8:50 Govind Singh [this message] 2018-02-15 8:50 ` [PATCH 10/13] ath10k: Add support to get target info from hif ops Govind Singh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1518684603-5812-1-git-send-email-govinds@codeaurora.org \ --to=govinds@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=pillair@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.