All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, airlied@linux.ie,
	vladimir_zapolskiy@mentor.com, horms@verge.net.au,
	magnus.damm@gmail.com, geert@linux-m68k.org,
	niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver
Date: Fri,  6 Apr 2018 14:41:57 +0200	[thread overview]
Message-ID: <1523018517-24121-3-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1523018517-24121-1-git-send-email-jacopo+renesas@jmondi.org>

Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
output converter.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/gpu/drm/bridge/Kconfig        |   6 +
 drivers/gpu/drm/bridge/Makefile       |   1 +
 drivers/gpu/drm/bridge/thc63lvd1024.c | 212 ++++++++++++++++++++++++++++++++++
 3 files changed, 219 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 3aa65bd..42c9c2d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -93,6 +93,12 @@ config DRM_SII9234
 	  It is an I2C driver, that detects connection of MHL bridge
 	  and starts encapsulation of HDMI signal.
 
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	---help---
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
 config DRM_TOSHIBA_TC358767
 	tristate "Toshiba TC358767 eDP bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 373eb28..fd90b16 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
+obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
new file mode 100644
index 0000000..c8fad9c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * THC63LVD1024 LVDS to parallel data DRM bridge driver.
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+enum thc63_ports {
+	THC63_LVDS_IN0,
+	THC63_LVDS_IN1,
+	THC63_RGB_OUT0,
+	THC63_RGB_OUT1,
+};
+
+struct thc63_dev {
+	struct device *dev;
+
+	struct regulator *vcc;
+
+	struct gpio_desc *pdwn;
+	struct gpio_desc *oe;
+
+	struct drm_bridge bridge;
+	struct drm_bridge *next;
+};
+
+static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct thc63_dev, bridge);
+}
+
+static int thc63_attach(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+
+	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
+}
+
+static void thc63_enable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	ret = regulator_enable(thc63->vcc);
+	if (ret) {
+		dev_err(thc63->dev,
+			"Failed to enable regulator \"vcc\": %d\n", ret);
+		return;
+	}
+
+	if (thc63->pdwn)
+		gpiod_set_value(thc63->pdwn, 0);
+
+	if (thc63->oe)
+		gpiod_set_value(thc63->oe, 1);
+}
+
+static void thc63_disable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	if (thc63->oe)
+		gpiod_set_value(thc63->oe, 0);
+
+	if (thc63->pdwn)
+		gpiod_set_value(thc63->pdwn, 1);
+
+	ret = regulator_disable(thc63->vcc);
+	if (ret)
+		dev_err(thc63->dev,
+			"Failed to disable regulator \"vcc\": %d\n", ret);
+}
+
+static const struct drm_bridge_funcs thc63_bridge_func = {
+	.attach	= thc63_attach,
+	.enable = thc63_enable,
+	.disable = thc63_disable,
+};
+
+static int thc63_parse_dt(struct thc63_dev *thc63)
+{
+	struct device_node *thc63_out;
+	struct device_node *remote;
+
+	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+						  THC63_RGB_OUT0, -1);
+	if (!thc63_out) {
+		dev_err(thc63->dev, "Missing endpoint in port@%u\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	remote = of_graph_get_remote_port_parent(thc63_out);
+	of_node_put(thc63_out);
+	if (!remote) {
+		dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
+			THC63_RGB_OUT0);
+		of_node_put(remote);
+		return -ENODEV;
+	}
+
+	thc63->next = of_drm_find_bridge(remote);
+	if (!thc63->next) {
+		of_node_put(remote);
+		return -EPROBE_DEFER;
+	}
+
+	return 0;
+}
+
+static int thc63_gpio_init(struct thc63_dev *thc63)
+{
+	thc63->oe = devm_gpiod_get_optional(thc63->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(thc63->oe)) {
+		dev_err(thc63->dev, "Unable to get \"enable-gpios\": %ld\n",
+			PTR_ERR(thc63->oe));
+		return PTR_ERR(thc63->oe);
+	}
+
+	thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
+					      GPIOD_OUT_HIGH);
+	if (IS_ERR(thc63->pdwn)) {
+		dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
+			PTR_ERR(thc63->pdwn));
+		return PTR_ERR(thc63->pdwn);
+	}
+
+	return 0;
+}
+
+static int thc63_probe(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63;
+	int ret;
+
+	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
+	if (!thc63)
+		return -ENOMEM;
+
+	thc63->dev = &pdev->dev;
+	platform_set_drvdata(pdev, thc63);
+
+	thc63->vcc = devm_regulator_get(thc63->dev, "vcc");
+	if (IS_ERR(thc63->vcc)) {
+		if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
+			PTR_ERR(thc63->vcc));
+		return PTR_ERR(thc63->vcc);
+	}
+
+	ret = thc63_gpio_init(thc63);
+	if (ret)
+		return ret;
+
+	ret = thc63_parse_dt(thc63);
+	if (ret)
+		return ret;
+
+	thc63->bridge.driver_private = thc63;
+	thc63->bridge.of_node = pdev->dev.of_node;
+	thc63->bridge.funcs = &thc63_bridge_func;
+
+	drm_bridge_add(&thc63->bridge);
+
+	return 0;
+}
+
+static int thc63_remove(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&thc63->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id thc63_match[] = {
+	{ .compatible = "thine,thc63lvd1024", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thc63_match);
+
+static struct platform_driver thc63_driver = {
+	.probe	= thc63_probe,
+	.remove	= thc63_remove,
+	.driver	= {
+		.name		= "thc63lvd1024",
+		.of_match_table	= thc63_match,
+	},
+};
+module_platform_driver(thc63_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

  parent reply	other threads:[~2018-04-06 12:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-06 12:41 [PATCH v7 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-06 12:41 ` [PATCH v7 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-04-06 13:15   ` Laurent Pinchart
2018-04-06 13:15     ` Laurent Pinchart
2018-04-06 14:25     ` jacopo mondi
2018-04-06 14:25       ` jacopo mondi
2018-04-06 15:40       ` Laurent Pinchart
2018-04-06 15:40         ` Laurent Pinchart
2018-04-07  9:45         ` jacopo mondi
2018-04-07  9:45           ` jacopo mondi
2018-04-07  9:56           ` Laurent Pinchart
2018-04-07  9:56             ` Laurent Pinchart
2018-04-09 10:22         ` Mark Brown
2018-04-09 10:22           ` Mark Brown
2018-04-06 12:41 ` Jacopo Mondi [this message]
2018-04-06 13:24   ` [PATCH v7 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Laurent Pinchart
2018-04-06 13:24     ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523018517-24121-3-git-send-email-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=vladimir_zapolskiy@mentor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.