From: Neil Armstrong <narmstrong@baylibre.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Date: Wed, 11 Apr 2018 17:08:00 +0200 [thread overview] Message-ID: <1523459282-12235-2-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/usb/host/Kconfig | 7 +++ drivers/usb/host/Makefile | 1 + drivers/usb/host/dwc3-of-simple.c | 109 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 drivers/usb/host/dwc3-of-simple.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a7249b7..6caa615 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -21,6 +21,13 @@ config USB_XHCI_DWC3 Say Y or if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. +config USB_XHCI_DWC3_OF_SIMPLE + bool "DesignWare USB3 DRD Generic OF Simple Glue Layer" + select MISC + help + Support USB2/3 functionality in simple SoC integrations with + USB controller based on the DesignWare USB3 IP Core. + config USB_XHCI_MVEBU bool "MVEBU USB 3.0 support" default y diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9819489..abe4f90 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o +obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o diff --git a/drivers/usb/host/dwc3-of-simple.c b/drivers/usb/host/dwc3-of-simple.c new file mode 100644 index 0000000..54a5f60 --- /dev/null +++ b/drivers/usb/host/dwc3-of-simple.c @@ -0,0 +1,109 @@ +/* + * dwc3-of-simple.c - OF glue layer for simple integrations + * + * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstron@baylibre.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <reset.h> +#include <clk.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct dwc3_of_simple { + struct clk_bulk clks; + struct reset_ctl_bulk resets; +}; + +static int dwc3_of_simple_reset_init(struct udevice *dev, + struct dwc3_of_simple *simple) +{ + int ret; + + ret = reset_get_bulk(dev, &simple->resets); + if (ret == -ENOTSUPP) + return 0; + else if (ret) + return ret; + + ret = reset_deassert_bulk(&simple->resets); + if (ret) { + reset_release_bulk(&simple->resets); + return ret; + } + + return 0; +} + +static int dwc3_of_simple_clk_init(struct udevice *dev, + struct dwc3_of_simple *simple) +{ + int ret; + + ret = clk_get_bulk(dev, &simple->clks); + if (ret == -ENOTSUPP) + return 0; + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(CLK) + ret = clk_enable_bulk(&simple->clks); + if (ret) { + clk_release_bulk(&simple->clks); + return ret; + } +#endif + + return 0; +} + +static int dwc3_of_simple_probe(struct udevice *dev) +{ + struct dwc3_of_simple *simple = dev_get_platdata(dev); + int ret; + + ret = dwc3_of_simple_clk_init(dev, simple); + if (ret) + return ret; + + ret = dwc3_of_simple_reset_init(dev, simple); + if (ret) + return ret; + + return 0; +} + +static int dwc3_of_simple_remove(struct udevice *dev) +{ + struct dwc3_of_simple *simple = dev_get_platdata(dev); + + reset_release_bulk(&simple->resets); + + clk_release_bulk(&simple->clks); + + return dm_scan_fdt_dev(dev); +} + +static const struct udevice_id dwc3_of_simple_ids[] = { + { .compatible = "amlogic,meson-gxl-dwc3" }, + { } +}; + +U_BOOT_DRIVER(dwc3_of_simple) = { + .name = "dwc3-of-simple", + .id = UCLASS_SIMPLE_BUS, + .of_match = dwc3_of_simple_ids, + .probe = dwc3_of_simple_probe, + .remove = dwc3_of_simple_remove, + .platdata_auto_alloc_size = sizeof(struct dwc3_of_simple), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong) To: linus-amlogic@lists.infradead.org Subject: [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Date: Wed, 11 Apr 2018 17:08:00 +0200 [thread overview] Message-ID: <1523459282-12235-2-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/usb/host/Kconfig | 7 +++ drivers/usb/host/Makefile | 1 + drivers/usb/host/dwc3-of-simple.c | 109 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 drivers/usb/host/dwc3-of-simple.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a7249b7..6caa615 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -21,6 +21,13 @@ config USB_XHCI_DWC3 Say Y or if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. +config USB_XHCI_DWC3_OF_SIMPLE + bool "DesignWare USB3 DRD Generic OF Simple Glue Layer" + select MISC + help + Support USB2/3 functionality in simple SoC integrations with + USB controller based on the DesignWare USB3 IP Core. + config USB_XHCI_MVEBU bool "MVEBU USB 3.0 support" default y diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9819489..abe4f90 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o +obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o diff --git a/drivers/usb/host/dwc3-of-simple.c b/drivers/usb/host/dwc3-of-simple.c new file mode 100644 index 0000000..54a5f60 --- /dev/null +++ b/drivers/usb/host/dwc3-of-simple.c @@ -0,0 +1,109 @@ +/* + * dwc3-of-simple.c - OF glue layer for simple integrations + * + * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstron@baylibre.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <reset.h> +#include <clk.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct dwc3_of_simple { + struct clk_bulk clks; + struct reset_ctl_bulk resets; +}; + +static int dwc3_of_simple_reset_init(struct udevice *dev, + struct dwc3_of_simple *simple) +{ + int ret; + + ret = reset_get_bulk(dev, &simple->resets); + if (ret == -ENOTSUPP) + return 0; + else if (ret) + return ret; + + ret = reset_deassert_bulk(&simple->resets); + if (ret) { + reset_release_bulk(&simple->resets); + return ret; + } + + return 0; +} + +static int dwc3_of_simple_clk_init(struct udevice *dev, + struct dwc3_of_simple *simple) +{ + int ret; + + ret = clk_get_bulk(dev, &simple->clks); + if (ret == -ENOTSUPP) + return 0; + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(CLK) + ret = clk_enable_bulk(&simple->clks); + if (ret) { + clk_release_bulk(&simple->clks); + return ret; + } +#endif + + return 0; +} + +static int dwc3_of_simple_probe(struct udevice *dev) +{ + struct dwc3_of_simple *simple = dev_get_platdata(dev); + int ret; + + ret = dwc3_of_simple_clk_init(dev, simple); + if (ret) + return ret; + + ret = dwc3_of_simple_reset_init(dev, simple); + if (ret) + return ret; + + return 0; +} + +static int dwc3_of_simple_remove(struct udevice *dev) +{ + struct dwc3_of_simple *simple = dev_get_platdata(dev); + + reset_release_bulk(&simple->resets); + + clk_release_bulk(&simple->clks); + + return dm_scan_fdt_dev(dev); +} + +static const struct udevice_id dwc3_of_simple_ids[] = { + { .compatible = "amlogic,meson-gxl-dwc3" }, + { } +}; + +U_BOOT_DRIVER(dwc3_of_simple) = { + .name = "dwc3-of-simple", + .id = UCLASS_SIMPLE_BUS, + .of_match = dwc3_of_simple_ids, + .probe = dwc3_of_simple_probe, + .remove = dwc3_of_simple_remove, + .platdata_auto_alloc_size = sizeof(struct dwc3_of_simple), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; -- 2.7.4
next prev parent reply other threads:[~2018-04-11 15:08 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-11 15:07 [U-Boot] [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Neil Armstrong 2018-04-11 15:07 ` Neil Armstrong 2018-04-11 15:08 ` Neil Armstrong [this message] 2018-04-11 15:08 ` [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong 2018-04-11 16:17 ` [U-Boot] " Jean-Jacques Hiblot 2018-04-11 16:17 ` Jean-Jacques Hiblot 2018-04-12 8:05 ` Neil Armstrong 2018-04-12 8:05 ` Neil Armstrong 2018-04-12 8:07 ` Ben Dooks 2018-04-12 8:07 ` Ben Dooks 2018-04-12 8:08 ` Neil Armstrong 2018-04-12 8:08 ` Neil Armstrong 2018-04-11 15:08 ` [U-Boot] [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs Neil Armstrong 2018-04-11 15:08 ` Neil Armstrong 2018-04-11 15:08 ` [U-Boot] [PATCH v3 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers Neil Armstrong 2018-04-11 15:08 ` Neil Armstrong 2018-04-11 15:20 ` [U-Boot] [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Marek Vasut 2018-04-11 15:20 ` Marek Vasut
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1523459282-12235-2-git-send-email-narmstrong@baylibre.com \ --to=narmstrong@baylibre.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.