From: Yoshihiro Kaneko <ykaneko0929@gmail.com> To: linux-renesas-soc@vger.kernel.org Cc: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/5] arm64: dts: renesas: r8a77965: sort subnodes of the root node Date: Thu, 19 Apr 2018 05:14:38 +0900 [thread overview] Message-ID: <1524082480-18163-4-git-send-email-ykaneko0929@gmail.com> (raw) In-Reply-To: <1524082480-18163-1-git-send-email-ykaneko0929@gmail.com> Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 120 +++++++++++++++--------------- 1 file changed, 60 insertions(+), 60 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index a41f916..d110382 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -22,9 +22,34 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; cpus { @@ -71,34 +96,24 @@ clock-frequency = <0>; }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - audio_clk_b: audio_clk_b { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -108,42 +123,6 @@ clock-frequency = <0>; }; - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External USB clocks - can be overridden by the board */ - usb3s0_clk: usb3s0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>; - }; - soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -1073,4 +1052,25 @@ /* placeholder */ }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ykaneko0929@gmail.com (Yoshihiro Kaneko) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/5] arm64: dts: renesas: r8a77965: sort subnodes of the root node Date: Thu, 19 Apr 2018 05:14:38 +0900 [thread overview] Message-ID: <1524082480-18163-4-git-send-email-ykaneko0929@gmail.com> (raw) In-Reply-To: <1524082480-18163-1-git-send-email-ykaneko0929@gmail.com> Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 120 +++++++++++++++--------------- 1 file changed, 60 insertions(+), 60 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index a41f916..d110382 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -22,9 +22,34 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; cpus { @@ -71,34 +96,24 @@ clock-frequency = <0>; }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - audio_clk_b: audio_clk_b { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -108,42 +123,6 @@ clock-frequency = <0>; }; - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External USB clocks - can be overridden by the board */ - usb3s0_clk: usb3s0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>; - }; - soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -1073,4 +1052,25 @@ /* placeholder */ }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; -- 1.9.1
next prev parent reply other threads:[~2018-04-18 20:15 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-18 20:14 [PATCH 0/5] arm64: dts: renesas: r8a779xx: sort nodes Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko 2018-04-18 20:14 ` [PATCH 1/5] arm64: dts: renesas: r8a77995: sort subnodes of the root node Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko 2018-04-18 20:14 ` [PATCH 2/5] arm64: dts: renesas: r8a77995: sort subnodes of the soc node Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko [this message] 2018-04-18 20:14 ` [PATCH 3/5] arm64: dts: renesas: r8a77965: sort subnodes of the root node Yoshihiro Kaneko 2018-04-18 20:14 ` [PATCH 4/5] arm64: dts: renesas: r8a77965: sort subnodes of the soc node Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko 2018-04-18 20:14 ` [PATCH 5/5] arm64: dts: renesas: r8a77970: " Yoshihiro Kaneko 2018-04-18 20:14 ` Yoshihiro Kaneko 2018-04-23 10:26 ` [PATCH 0/5] arm64: dts: renesas: r8a779xx: sort nodes Simon Horman 2018-04-23 10:26 ` Simon Horman 2018-04-23 17:31 ` Yoshihiro Kaneko 2018-04-23 17:31 ` Yoshihiro Kaneko 2018-04-24 8:24 ` Simon Horman 2018-04-24 8:24 ` Simon Horman 2018-04-24 17:22 ` Yoshihiro Kaneko 2018-04-24 17:22 ` Yoshihiro Kaneko 2018-04-25 6:57 ` Simon Horman 2018-04-25 6:57 ` Simon Horman 2018-04-25 7:01 ` Simon Horman 2018-04-25 7:01 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1524082480-18163-4-git-send-email-ykaneko0929@gmail.com \ --to=ykaneko0929@gmail.com \ --cc=horms@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.