From: Yu Wang <yyuwang@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH] ath10k: add quiet mode support for QCA6174/QCA9377 Date: Thu, 3 May 2018 14:01:25 +0800 [thread overview] Message-ID: <1525327285-15392-2-git-send-email-yyuwang@codeaurora.org> (raw) In-Reply-To: <1525327285-15392-1-git-send-email-yyuwang@codeaurora.org> To enable thermal throttling for QCA6174 and QCA9377, implement gen_pdev_set_quiet_mode for them. With this change, quiet period for QCA6174/QCA9377 can be also set/get via debugfs. Usage: To set quiet period: echo <period> > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period To get the current quiet period: cat /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period This change has been verified with QCA6174 hw3.2(fw: WLAN_RM.4.4.1-00102-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 33 ++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 16 +++++++++++++++ 2 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 01f4eb2..2e34a1f 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -3136,6 +3136,37 @@ static u32 ath10k_wmi_tlv_prepare_peer_qos(u8 uapsd_queues, u8 sp) } static struct sk_buff * +ath10k_wmi_tlv_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period, + u32 duration, u32 next_offset, + u32 enabled) +{ + struct wmi_tlv_set_quiet_cmd *cmd; + struct wmi_tlv *tlv; + struct sk_buff *skb; + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + tlv = (void *)skb->data; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_PDEV_SET_QUIET_CMD); + tlv->len = __cpu_to_le16(sizeof(*cmd)); + cmd = (void *)tlv->value; + + /* vdev_id is not in use, set to 0 */ + cmd->vdev_id = __cpu_to_le32(0); + cmd->period = __cpu_to_le32(period); + cmd->duration = __cpu_to_le32(duration); + cmd->next_start = __cpu_to_le32(next_offset); + cmd->enabled = __cpu_to_le32(enabled); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi tlv quiet param: period %u duration %u enabled %d\n", + period, duration, enabled); + return skb; +} + +static struct sk_buff * ath10k_wmi_tlv_op_gen_wow_enable(struct ath10k *ar) { struct wmi_tlv_wow_enable_cmd *cmd; @@ -3854,7 +3885,7 @@ static u32 ath10k_wmi_tlv_prepare_peer_qos(u8 uapsd_queues, u8 sp) .gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg, .gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable, - /* .gen_pdev_set_quiet_mode not implemented */ + .gen_pdev_set_quiet_mode = ath10k_wmi_tlv_op_gen_pdev_set_quiet_mode, .gen_pdev_get_temperature = ath10k_wmi_tlv_op_gen_pdev_get_temperature, /* .gen_addba_clear_resp not implemented */ /* .gen_addba_send not implemented */ diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 954c50b..3e1e340 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. + * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1952,6 +1953,21 @@ struct wmi_tlv_wow_add_del_event_cmd { __le32 event_bitmap; } __packed; +/* Command to set/unset chip in quiet mode */ +struct wmi_tlv_set_quiet_cmd { + __le32 vdev_id; + + /* in TUs */ + __le32 period; + + /* in TUs */ + __le32 duration; + + /* offset in TUs */ + __le32 next_start; + __le32 enabled; +} __packed; + struct wmi_tlv_wow_enable_cmd { __le32 enable; } __packed; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Yu Wang <yyuwang@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH] ath10k: add quiet mode support for QCA6174/QCA9377 Date: Thu, 3 May 2018 14:01:25 +0800 [thread overview] Message-ID: <1525327285-15392-2-git-send-email-yyuwang@codeaurora.org> (raw) In-Reply-To: <1525327285-15392-1-git-send-email-yyuwang@codeaurora.org> To enable thermal throttling for QCA6174 and QCA9377, implement gen_pdev_set_quiet_mode for them. With this change, quiet period for QCA6174/QCA9377 can be also set/get via debugfs. Usage: To set quiet period: echo <period> > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period To get the current quiet period: cat /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period This change has been verified with QCA6174 hw3.2(fw: WLAN_RM.4.4.1-00102-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 33 ++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 16 +++++++++++++++ 2 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 01f4eb2..2e34a1f 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -3136,6 +3136,37 @@ static u32 ath10k_wmi_tlv_prepare_peer_qos(u8 uapsd_queues, u8 sp) } static struct sk_buff * +ath10k_wmi_tlv_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period, + u32 duration, u32 next_offset, + u32 enabled) +{ + struct wmi_tlv_set_quiet_cmd *cmd; + struct wmi_tlv *tlv; + struct sk_buff *skb; + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + tlv = (void *)skb->data; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_PDEV_SET_QUIET_CMD); + tlv->len = __cpu_to_le16(sizeof(*cmd)); + cmd = (void *)tlv->value; + + /* vdev_id is not in use, set to 0 */ + cmd->vdev_id = __cpu_to_le32(0); + cmd->period = __cpu_to_le32(period); + cmd->duration = __cpu_to_le32(duration); + cmd->next_start = __cpu_to_le32(next_offset); + cmd->enabled = __cpu_to_le32(enabled); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi tlv quiet param: period %u duration %u enabled %d\n", + period, duration, enabled); + return skb; +} + +static struct sk_buff * ath10k_wmi_tlv_op_gen_wow_enable(struct ath10k *ar) { struct wmi_tlv_wow_enable_cmd *cmd; @@ -3854,7 +3885,7 @@ static u32 ath10k_wmi_tlv_prepare_peer_qos(u8 uapsd_queues, u8 sp) .gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg, .gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable, - /* .gen_pdev_set_quiet_mode not implemented */ + .gen_pdev_set_quiet_mode = ath10k_wmi_tlv_op_gen_pdev_set_quiet_mode, .gen_pdev_get_temperature = ath10k_wmi_tlv_op_gen_pdev_get_temperature, /* .gen_addba_clear_resp not implemented */ /* .gen_addba_send not implemented */ diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 954c50b..3e1e340 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. + * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1952,6 +1953,21 @@ struct wmi_tlv_wow_add_del_event_cmd { __le32 event_bitmap; } __packed; +/* Command to set/unset chip in quiet mode */ +struct wmi_tlv_set_quiet_cmd { + __le32 vdev_id; + + /* in TUs */ + __le32 period; + + /* in TUs */ + __le32 duration; + + /* offset in TUs */ + __le32 next_start; + __le32 enabled; +} __packed; + struct wmi_tlv_wow_enable_cmd { __le32 enable; } __packed; -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2018-05-03 6:01 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-03 6:01 [PATCH] ath10k: add quiet mode support for QCA6174/QCA9377 Yu Wang 2018-05-03 6:01 ` Yu Wang 2018-05-03 6:01 ` Yu Wang [this message] 2018-05-03 6:01 ` Yu Wang 2018-05-12 9:01 ` Kalle Valo 2018-05-12 9:01 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1525327285-15392-2-git-send-email-yyuwang@codeaurora.org \ --to=yyuwang@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.