All of lore.kernel.org
 help / color / mirror / Atom feed
From: robbieko <robbieko@synology.com>
To: linux-btrfs@vger.kernel.org
Cc: Robbie Ko <robbieko@synology.com>
Subject: [PATCH v3] btrfs: incremental send, fix BUG when invalid memory access
Date: Mon, 14 May 2018 10:51:34 +0800	[thread overview]
Message-ID: <1526266294-23121-1-git-send-email-robbieko@synology.com> (raw)

From: Robbie Ko <robbieko@synology.com>

[BUG]
btrfs incremental send BUG happens when creating a snapshot of snapshot
that is being used by send.

[REASON]
The problem can happen if while we are doing a send one of the snapshots
used (parent or send) is snapshotted, because snapshoting implies COWing
the root of the source subvolume/snapshot.

1. When doing an incremental send, the send process will get the commit
   roots from the parent and send snapshots, and add references to them
   through extent_buffer_get().

2. When a snapshot/subvolume is snapshotted, its root node is COWed
   (transaction.c:create_pending_snapshot()).

3. COWing releases the space used by the node immediately, through:

   __btrfs_cow_block()
   --btrfs_free_tree_block()
   ----btrfs_add_free_space(bytenr of node)

4. Because send doesn't hold a transaction open, it's possible that
   the transaction used to create the snapshot commits, switches the
   commit root and the old space used by the previous root node gets
   assigned to some other node allocation. Allocation of a new node will
   use the existing extent buffer found in memory, which we previously
   got a reference through extent_buffer_get(), and allow the extent
   buffer's content (pages) to be modified:

   btrfs_alloc_tree_block
   --btrfs_reserve_extent
   ----find_free_extent (get bytenr of old node)
   --btrfs_init_new_buffer (use bytenr of old node)
   ----btrfs_find_create_tree_block
   ------alloc_extent_buffer
   --------find_extent_buffer (get old node)

5. So send can access invalid memory content and have unpredictable
   behaviour.

[FIX]
So we fix the problem by copying the commit roots of the send and
parent snapshots and use those copies.

CallTrace looks like this:
 ------------[ cut here ]------------
 kernel BUG at fs/btrfs/ctree.c:1861!
 invalid opcode: 0000 [#1] SMP
 CPU: 6 PID: 24235 Comm: btrfs Tainted: P           O 3.10.105 #23721
 ffff88046652d680 ti: ffff88041b720000 task.ti: ffff88041b720000
 RIP: 0010:[<ffffffffa08dd0e8>] read_node_slot+0x108/0x110 [btrfs]
 RSP: 0018:ffff88041b723b68  EFLAGS: 00010246
 RAX: ffff88043ca6b000 RBX: ffff88041b723c50 RCX: ffff880000000000
 RDX: 000000000000004c RSI: ffff880314b133f8 RDI: ffff880458b24000
 RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88041b723c66
 R10: 0000000000000001 R11: 0000000000001000 R12: ffff8803f3e48890
 R13: ffff8803f3e48880 R14: ffff880466351800 R15: 0000000000000001
 FS:  00007f8c321dc8c0(0000) GS:ffff88047fcc0000(0000)
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 R2: 00007efd1006d000 CR3: 0000000213a24000 CR4: 00000000003407e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Stack:
 ffff88041b723c50 ffff8803f3e48880 ffff8803f3e48890 ffff8803f3e48880
 ffff880466351800 0000000000000001 ffffffffa08dd9d7 ffff88041b723c50
 ffff8803f3e48880 ffff88041b723c66 ffffffffa08dde85 a9ff88042d2c4400
 Call Trace:
 [<ffffffffa08dd9d7>] ? tree_move_down.isra.33+0x27/0x50 [btrfs]
 [<ffffffffa08dde85>] ? tree_advance+0xb5/0xc0 [btrfs]
 [<ffffffffa08e83d4>] ? btrfs_compare_trees+0x2d4/0x760 [btrfs]
 [<ffffffffa0982050>] ? finish_inode_if_needed+0x870/0x870 [btrfs]
 [<ffffffffa09841ea>] ? btrfs_ioctl_send+0xeda/0x1050 [btrfs]
 [<ffffffffa094bd3d>] ? btrfs_ioctl+0x1e3d/0x33f0 [btrfs]
 [<ffffffff81111133>] ? handle_pte_fault+0x373/0x990
 [<ffffffff8153a096>] ? atomic_notifier_call_chain+0x16/0x20
 [<ffffffff81063256>] ? set_task_cpu+0xb6/0x1d0
 [<ffffffff811122c3>] ? handle_mm_fault+0x143/0x2a0
 [<ffffffff81539cc0>] ? __do_page_fault+0x1d0/0x500
 [<ffffffff81062f07>] ? check_preempt_curr+0x57/0x90
 [<ffffffff8115075a>] ? do_vfs_ioctl+0x4aa/0x990
 [<ffffffff81034f83>] ? do_fork+0x113/0x3b0
 [<ffffffff812dd7d7>] ? trace_hardirqs_off_thunk+0x3a/0x6c
 [<ffffffff81150cc8>] ? SyS_ioctl+0x88/0xa0
 [<ffffffff8153e422>] ? system_call_fastpath+0x16/0x1b
 ---[ end trace 29576629ee80b2e1 ]---

Signed-off-by: Robbie Ko <robbieko@synology.com>
---
V3: use btrfs_clone_extent_buffer
V2: fix comments
 fs/btrfs/ctree.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index b88a79e..8b6b554 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -5460,12 +5460,24 @@ int btrfs_compare_trees(struct btrfs_root *left_root,
 	down_read(&fs_info->commit_root_sem);
 	left_level = btrfs_header_level(left_root->commit_root);
 	left_root_level = left_level;
-	left_path->nodes[left_level] = left_root->commit_root;
+	left_path->nodes[left_level] =
+			btrfs_clone_extent_buffer(left_root->commit_root);
+	if (!left_path->nodes[left_level]) {
+		up_read(&fs_info->commit_root_sem);
+		ret = -ENOMEM;
+		goto out;
+	}
 	extent_buffer_get(left_path->nodes[left_level]);
 
 	right_level = btrfs_header_level(right_root->commit_root);
 	right_root_level = right_level;
-	right_path->nodes[right_level] = right_root->commit_root;
+	right_path->nodes[right_level] =
+			btrfs_clone_extent_buffer(right_root->commit_root);
+	if (!right_path->nodes[right_level]) {
+		up_read(&fs_info->commit_root_sem);
+		ret = -ENOMEM;
+		goto out;
+	}
 	extent_buffer_get(right_path->nodes[right_level]);
 	up_read(&fs_info->commit_root_sem);
 
-- 
1.9.1


             reply	other threads:[~2018-05-14  2:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14  2:51 robbieko [this message]
2018-05-14 11:39 ` [PATCH v3] btrfs: incremental send, fix BUG when invalid memory access Filipe Manana
2018-05-14 13:45   ` David Sterba

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526266294-23121-1-git-send-email-robbieko@synology.com \
    --to=robbieko@synology.com \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.