From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: "Luis R . Rodriguez" <mcgrof@suse.com>,
Randy Dunlap <rdunlap@infradead.org>,
Ulf Magnusson <ulfalizer@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] kconfig: refactor GTK+ package checks for building gconf
Date: Sun, 20 May 2018 17:16:51 +0900 [thread overview]
Message-ID: <1526804213-8238-4-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1526804213-8238-1-git-send-email-yamada.masahiro@socionext.com>
Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
---
Changes in v2: None
scripts/kconfig/Makefile | 43 +++++++++----------------------------------
scripts/kconfig/gconf-cfg.sh | 23 +++++++++++++++++++++++
2 files changed, 32 insertions(+), 34 deletions(-)
create mode 100755 scripts/kconfig/gconf-cfg.sh
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index e9a87bf..c222745 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -188,8 +188,6 @@ HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
# Utilizes ncurses
# mconf: Used for the menuconfig target
# Utilizes the lxdialog package
-# gconf: Used for the gconfig target
-# Based on GTK+ which needs to be installed to compile it
# object files used by all kconfig flavours
lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
@@ -199,12 +197,10 @@ conf-objs := conf.o zconf.tab.o
mconf-objs := mconf.o zconf.tab.o $(lxdialog)
nconf-objs := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs := kxgettext.o zconf.tab.o
-gconf-objs := gconf.o zconf.tab.o
-hostprogs-y := conf nconf mconf kxgettext gconf
+hostprogs-y := conf nconf mconf kxgettext
targets += zconf.lex.c
-clean-files := .tmp_gtkcheck
clean-files += gconf.glade.h
clean-files += config.pot linux.pot
@@ -224,10 +220,6 @@ HOST_EXTRACXXFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTC
HOSTCFLAGS_zconf.lex.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
-HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
-HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
- -Wno-missing-prototypes
-
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = $(shell \
@@ -251,31 +243,14 @@ quiet_cmd_moc = MOC $@
$(obj)/%.moc: $(src)/%.h $(obj)/.qconf-cfg
$(call cmd,moc)
-$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-
-ifeq ($(MAKECMDGOALS),gconfig)
--include $(obj)/.tmp_gtkcheck
-
-# GTK+ needs some extra effort, too...
-$(obj)/.tmp_gtkcheck:
- @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
- if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
- touch $@; \
- else \
- echo >&2 "*"; \
- echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
- echo >&2 "*"; \
- false; \
- fi \
- else \
- echo >&2 "*"; \
- echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
- echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
- echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
- echo >&2 "*"; \
- false; \
- fi
-endif
+# gconf: Used for the gconfig target based on GTK+
+hostprogs-y += gconf
+gconf-objs := gconf.o zconf.tab.o
+
+HOSTLOADLIBES_gconf = $(shell . $(obj)/.gconf-cfg && echo $$libs)
+HOSTCFLAGS_gconf.o = $(shell . $(obj)/.gconf-cfg && echo $$cflags)
+
+$(obj)/gconf.o: $(obj)/.gconf-cfg
$(obj)/zconf.tab.o: $(obj)/zconf.lex.c
diff --git a/scripts/kconfig/gconf-cfg.sh b/scripts/kconfig/gconf-cfg.sh
new file mode 100755
index 0000000..533b3d8
--- /dev/null
+++ b/scripts/kconfig/gconf-cfg.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
+
+if ! pkg-config --exists $PKG; then
+ echo >&2 "*"
+ echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
+ echo >&2 "* the GTK+ 2.0 development package is correctly installed."
+ echo >&2 "* You need $PKG"
+ echo >&2 "*"
+ exit 1
+fi
+
+if ! pkg-config --atleast-version=2.0.0 gtk+-2.0; then
+ echo >&2 "*"
+ echo >&2 "* GTK+ is present but version >= 2.0.0 is required."
+ echo >&2 "*"
+ exit 1
+fi
+
+echo cflags=\"$(pkg-config --cflags $PKG)\"
+echo libs=\"$(pkg-config --libs $PKG)\"
--
2.7.4
next prev parent reply other threads:[~2018-05-20 8:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-20 8:16 [PATCH v2 0/5] kconfig: refactor package checks for GUI frontends Masahiro Yamada
2018-05-20 8:16 ` [PATCH v2 1/5] kbuild: do not display CHK for filechk Masahiro Yamada
2018-05-20 8:16 ` [PATCH v2 2/5] kconfig: refactor Qt package checks for building qconf Masahiro Yamada
2018-05-20 9:45 ` Sam Ravnborg
2018-05-20 8:16 ` Masahiro Yamada [this message]
2018-05-20 8:16 ` [PATCH v2 4/5] kconfig: refactor ncurses package checks for building mconf Masahiro Yamada
2018-05-20 10:06 ` Sam Ravnborg
2018-05-22 6:48 ` Masahiro Yamada
2018-05-22 15:49 ` Sam Ravnborg
2018-05-20 23:36 ` Randy Dunlap
2018-05-20 8:16 ` [PATCH v2 5/5] kconfig: refactor ncurses package checks for building nconf Masahiro Yamada
2018-05-20 23:31 ` Randy Dunlap
2018-05-20 23:41 ` Randy Dunlap
2018-05-21 4:48 ` Masahiro Yamada
2018-05-21 4:51 ` Randy Dunlap
2018-05-21 4:58 ` Masahiro Yamada
2018-05-21 6:24 ` Randy Dunlap
2018-05-21 6:58 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526804213-8238-4-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcgrof@suse.com \
--cc=rdunlap@infradead.org \
--cc=sam@ravnborg.org \
--cc=ulfalizer@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.