From: Keerthy <j-keerthy@ti.com> To: santosh.shilimkar@oracle.com Cc: t-kristo@ti.com, j-keerthy@ti.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, d-gerlach@ti.com Subject: [PATCH 2/2] soc: ti: wkup_m3_ipc: Add wkup_m3_request_wake_src Date: Thu, 24 May 2018 01:33:06 +0530 [thread overview] Message-ID: <1527105786-23396-2-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1527105786-23396-1-git-send-email-j-keerthy@ti.com> From: Dave Gerlach <d-gerlach@ti.com> Add wkup_m3_request_wake_src to allow users to get the name of the wakeup source after a DeepSleep or Standby transition. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> --- This is tested on am437x-gp-evm and target for 4.19 drivers/soc/ti/wkup_m3_ipc.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/wkup_m3_ipc.h | 6 ++++++ 2 files changed, 45 insertions(+) diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index b732c39..6840688 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -46,6 +46,7 @@ #define M3_BASELINE_VERSION 0x191 #define M3_STATUS_RESP_MASK (0xffff << 16) #define M3_FW_VERSION_MASK 0xffff +#define M3_WAKE_SRC_MASK 0xff #define M3_STATE_UNKNOWN 0 #define M3_STATE_RESET 1 @@ -55,6 +56,23 @@ static struct wkup_m3_ipc *m3_ipc_state; +static const struct wkup_m3_wakeup_src wakeups[] = { + {.irq_nr = 35, .src = "USB0_PHY"}, + {.irq_nr = 36, .src = "USB1_PHY"}, + {.irq_nr = 40, .src = "I2C0"}, + {.irq_nr = 41, .src = "RTC Timer"}, + {.irq_nr = 42, .src = "RTC Alarm"}, + {.irq_nr = 43, .src = "Timer0"}, + {.irq_nr = 44, .src = "Timer1"}, + {.irq_nr = 45, .src = "UART"}, + {.irq_nr = 46, .src = "GPIO0"}, + {.irq_nr = 48, .src = "MPU_WAKE"}, + {.irq_nr = 49, .src = "WDT0"}, + {.irq_nr = 50, .src = "WDT1"}, + {.irq_nr = 51, .src = "ADC_TSC"}, + {.irq_nr = 0, .src = "Unknown"}, +}; + static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc) { writel(AM33XX_M3_TXEV_ACK, @@ -330,6 +348,26 @@ static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc) } /** + * wkup_m3_request_wake_src - Get the wakeup source info passed from wkup_m3 + * @m3_ipc: Pointer to wkup_m3_ipc context + */ +static const char *wkup_m3_request_wake_src(struct wkup_m3_ipc *m3_ipc) +{ + unsigned int wakeup_src_idx; + int j, val; + + val = wkup_m3_ctrl_ipc_read(m3_ipc, 6); + + wakeup_src_idx = val & M3_WAKE_SRC_MASK; + + for (j = 0; j < ARRAY_SIZE(wakeups) - 1; j++) { + if (wakeups[j].irq_nr == wakeup_src_idx) + return wakeups[j].src; + } + return wakeups[j].src; +} + +/** * wkup_m3_set_rtc_only - Set the rtc_only flag * @wkup_m3_wakeup: struct wkup_m3_wakeup_src * gets assigned the * wakeup src value @@ -346,6 +384,7 @@ static void wkup_m3_set_rtc_only(struct wkup_m3_ipc *m3_ipc) .prepare_low_power = wkup_m3_prepare_low_power, .finish_low_power = wkup_m3_finish_low_power, .request_pm_status = wkup_m3_request_pm_status, + .request_wake_src = wkup_m3_request_wake_src, .set_rtc_only = wkup_m3_set_rtc_only, }; diff --git a/include/linux/wkup_m3_ipc.h b/include/linux/wkup_m3_ipc.h index d639df1..e497e62 100644 --- a/include/linux/wkup_m3_ipc.h +++ b/include/linux/wkup_m3_ipc.h @@ -43,12 +43,18 @@ struct wkup_m3_ipc { int is_rtc_only; }; +struct wkup_m3_wakeup_src { + int irq_nr; + char src[10]; +}; + struct wkup_m3_ipc_ops { void (*set_mem_type)(struct wkup_m3_ipc *m3_ipc, int mem_type); void (*set_resume_address)(struct wkup_m3_ipc *m3_ipc, void *addr); int (*prepare_low_power)(struct wkup_m3_ipc *m3_ipc, int state); int (*finish_low_power)(struct wkup_m3_ipc *m3_ipc); int (*request_pm_status)(struct wkup_m3_ipc *m3_ipc); + const char *(*request_wake_src)(struct wkup_m3_ipc *m3_ipc); void (*set_rtc_only)(struct wkup_m3_ipc *m3_ipc); }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: j-keerthy@ti.com (Keerthy) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/2] soc: ti: wkup_m3_ipc: Add wkup_m3_request_wake_src Date: Thu, 24 May 2018 01:33:06 +0530 [thread overview] Message-ID: <1527105786-23396-2-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1527105786-23396-1-git-send-email-j-keerthy@ti.com> From: Dave Gerlach <d-gerlach@ti.com> Add wkup_m3_request_wake_src to allow users to get the name of the wakeup source after a DeepSleep or Standby transition. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> --- This is tested on am437x-gp-evm and target for 4.19 drivers/soc/ti/wkup_m3_ipc.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/wkup_m3_ipc.h | 6 ++++++ 2 files changed, 45 insertions(+) diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index b732c39..6840688 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -46,6 +46,7 @@ #define M3_BASELINE_VERSION 0x191 #define M3_STATUS_RESP_MASK (0xffff << 16) #define M3_FW_VERSION_MASK 0xffff +#define M3_WAKE_SRC_MASK 0xff #define M3_STATE_UNKNOWN 0 #define M3_STATE_RESET 1 @@ -55,6 +56,23 @@ static struct wkup_m3_ipc *m3_ipc_state; +static const struct wkup_m3_wakeup_src wakeups[] = { + {.irq_nr = 35, .src = "USB0_PHY"}, + {.irq_nr = 36, .src = "USB1_PHY"}, + {.irq_nr = 40, .src = "I2C0"}, + {.irq_nr = 41, .src = "RTC Timer"}, + {.irq_nr = 42, .src = "RTC Alarm"}, + {.irq_nr = 43, .src = "Timer0"}, + {.irq_nr = 44, .src = "Timer1"}, + {.irq_nr = 45, .src = "UART"}, + {.irq_nr = 46, .src = "GPIO0"}, + {.irq_nr = 48, .src = "MPU_WAKE"}, + {.irq_nr = 49, .src = "WDT0"}, + {.irq_nr = 50, .src = "WDT1"}, + {.irq_nr = 51, .src = "ADC_TSC"}, + {.irq_nr = 0, .src = "Unknown"}, +}; + static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc) { writel(AM33XX_M3_TXEV_ACK, @@ -330,6 +348,26 @@ static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc) } /** + * wkup_m3_request_wake_src - Get the wakeup source info passed from wkup_m3 + * @m3_ipc: Pointer to wkup_m3_ipc context + */ +static const char *wkup_m3_request_wake_src(struct wkup_m3_ipc *m3_ipc) +{ + unsigned int wakeup_src_idx; + int j, val; + + val = wkup_m3_ctrl_ipc_read(m3_ipc, 6); + + wakeup_src_idx = val & M3_WAKE_SRC_MASK; + + for (j = 0; j < ARRAY_SIZE(wakeups) - 1; j++) { + if (wakeups[j].irq_nr == wakeup_src_idx) + return wakeups[j].src; + } + return wakeups[j].src; +} + +/** * wkup_m3_set_rtc_only - Set the rtc_only flag * @wkup_m3_wakeup: struct wkup_m3_wakeup_src * gets assigned the * wakeup src value @@ -346,6 +384,7 @@ static void wkup_m3_set_rtc_only(struct wkup_m3_ipc *m3_ipc) .prepare_low_power = wkup_m3_prepare_low_power, .finish_low_power = wkup_m3_finish_low_power, .request_pm_status = wkup_m3_request_pm_status, + .request_wake_src = wkup_m3_request_wake_src, .set_rtc_only = wkup_m3_set_rtc_only, }; diff --git a/include/linux/wkup_m3_ipc.h b/include/linux/wkup_m3_ipc.h index d639df1..e497e62 100644 --- a/include/linux/wkup_m3_ipc.h +++ b/include/linux/wkup_m3_ipc.h @@ -43,12 +43,18 @@ struct wkup_m3_ipc { int is_rtc_only; }; +struct wkup_m3_wakeup_src { + int irq_nr; + char src[10]; +}; + struct wkup_m3_ipc_ops { void (*set_mem_type)(struct wkup_m3_ipc *m3_ipc, int mem_type); void (*set_resume_address)(struct wkup_m3_ipc *m3_ipc, void *addr); int (*prepare_low_power)(struct wkup_m3_ipc *m3_ipc, int state); int (*finish_low_power)(struct wkup_m3_ipc *m3_ipc); int (*request_pm_status)(struct wkup_m3_ipc *m3_ipc); + const char *(*request_wake_src)(struct wkup_m3_ipc *m3_ipc); void (*set_rtc_only)(struct wkup_m3_ipc *m3_ipc); }; -- 1.9.1
next prev parent reply other threads:[~2018-05-23 20:03 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-23 20:03 [PATCH 1/2] ti: wkup_m3_ipc: Add rtc_only with ddr in self refresh mode support Keerthy 2018-05-23 20:03 ` Keerthy 2018-05-23 20:03 ` Keerthy [this message] 2018-05-23 20:03 ` [PATCH 2/2] soc: ti: wkup_m3_ipc: Add wkup_m3_request_wake_src Keerthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1527105786-23396-2-git-send-email-j-keerthy@ti.com \ --to=j-keerthy@ti.com \ --cc=d-gerlach@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=santosh.shilimkar@oracle.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.