[DPU PATCH v3] Higher values of pclk can exceed 32 bits when multiplied by a factor.

[Abhinav Kumar <abhinavk@codeaurora.org>]

Make the pclk_rate u64 to accommodate higher pixel clock
rates.

Changes in v3:
 - Rebased on top of https://patchwork.kernel.org/patch/10348865/

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index b9f2ef9..596959c 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -669,7 +669,8 @@ static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	u8 lanes = msm_host->lanes;
 	u32 bpp = dsi_get_bpp(msm_host->format);
-	u32 pclk_rate;
+	u64 pclk_rate;
+	u64 pclk_bpp;
 
 	if (!mode) {
 		pr_err("%s: mode not set\n", __func__);
@@ -689,13 +690,15 @@ static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	if (is_dual_dsi)
 		pclk_rate /= 2;
 
+	pclk_bpp = pclk_rate * bpp;
 	if (lanes > 0) {
-		msm_host->byte_clk_rate = (pclk_rate * bpp) / (8 * lanes);
+		do_div(pclk_bpp, (8 * lanes));
 	} else {
 		pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__);
-		msm_host->byte_clk_rate = (pclk_rate * bpp) / 8;
+		do_div(pclk_bpp, 8);
 	}
 	msm_host->pixel_clk_rate = pclk_rate;
+	msm_host->byte_clk_rate = pclk_bpp;
 
 	DBG("pclk=%d, bclk=%d", msm_host->pixel_clk_rate,
 				msm_host->byte_clk_rate);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel