All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org, ryan@finnie.org
Cc: linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Sinan Kaya <okaya@codeaurora.org>,
	stable@vger.kernel.org, Don Brace <don.brace@microsemi.com>,
	"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	"open list:HEWLETT-PACKARD SMART ARRAY RAID DRIVER hpsa"
	<esc.storagedev@microsemi.com>,
	"open list:HEWLETT-PACKARD SMART ARRAY RAID DRIVER hpsa"
	<linux-scsi@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: [PATCH V5] scsi: hpsa: disable device during shutdown
Date: Sat,  2 Jun 2018 00:28:53 -0400	[thread overview]
Message-ID: <1527913733-16492-1-git-send-email-okaya@codeaurora.org> (raw)

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Disable device as part of the shutdown sequence.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
Tested-by: Don Brace <don.brace@microsemi.com>
Acked-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..b92f86a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8869,7 +8869,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 	kfree(options);
 }
 
-static void hpsa_shutdown(struct pci_dev *pdev)
+static void __hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
 
@@ -8884,6 +8884,12 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 }
 
+static void hpsa_shutdown(struct pci_dev *pdev)
+{
+	__hpsa_shutdown(pdev);
+	pci_disable_device(pdev);
+}
+
 static void hpsa_free_device_info(struct ctlr_info *h)
 {
 	int i;
@@ -8927,7 +8933,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 		scsi_remove_host(h->scsi_host);		/* init_one 8 */
 	/* includes hpsa_free_irqs - init_one 4 */
 	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
-	hpsa_shutdown(pdev);
+	__hpsa_shutdown(pdev);
 
 	hpsa_free_device_info(h);		/* scan */
 
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org, ryan@finnie.org
Cc: linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Sinan Kaya <okaya@codeaurora.org>,
	stable@vger.kernel.org, Don Brace <don.brace@microsemi.com>,
	"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	esc.storagedev@microsemi.com (open list:HEWLETT-PACKARD SMART
	ARRAY RAID DRIVER (hpsa)),
	linux-scsi@vger.kernel.org (open list:HEWLETT-PACKARD SMART
	ARRAY RAID DRIVER (hpsa)),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V5] scsi: hpsa: disable device during shutdown
Date: Sat,  2 Jun 2018 00:28:53 -0400	[thread overview]
Message-ID: <1527913733-16492-1-git-send-email-okaya@codeaurora.org> (raw)

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Disable device as part of the shutdown sequence.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
Tested-by: Don Brace <don.brace@microsemi.com>
Acked-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..b92f86a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8869,7 +8869,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 	kfree(options);
 }
 
-static void hpsa_shutdown(struct pci_dev *pdev)
+static void __hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
 
@@ -8884,6 +8884,12 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 }
 
+static void hpsa_shutdown(struct pci_dev *pdev)
+{
+	__hpsa_shutdown(pdev);
+	pci_disable_device(pdev);
+}
+
 static void hpsa_free_device_info(struct ctlr_info *h)
 {
 	int i;
@@ -8927,7 +8933,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 		scsi_remove_host(h->scsi_host);		/* init_one 8 */
 	/* includes hpsa_free_irqs - init_one 4 */
 	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
-	hpsa_shutdown(pdev);
+	__hpsa_shutdown(pdev);
 
 	hpsa_free_device_info(h);		/* scan */
 
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org, ryan@finnie.org
Cc: Don Brace <don.brace@microsemi.com>,
	"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
	"open list:HEWLETT-PACKARD SMART ARRAY RAID DRIVER hpsa"
	<linux-scsi@vger.kernel.org>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	linux-arm-msm@vger.kernel.org,
	"open list:HEWLETT-PACKARD SMART ARRAY RAID DRIVER hpsa"
	<esc.storagedev@microsemi.com>,
	open list <linux-kernel@vger.kernel.org>,
	stable@vger.kernel.org, Sinan Kaya <okaya@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5] scsi: hpsa: disable device during shutdown
Date: Sat,  2 Jun 2018 00:28:53 -0400	[thread overview]
Message-ID: <1527913733-16492-1-git-send-email-okaya@codeaurora.org> (raw)

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Disable device as part of the shutdown sequence.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
Tested-by: Don Brace <don.brace@microsemi.com>
Acked-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..b92f86a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8869,7 +8869,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 	kfree(options);
 }
 
-static void hpsa_shutdown(struct pci_dev *pdev)
+static void __hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
 
@@ -8884,6 +8884,12 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 }
 
+static void hpsa_shutdown(struct pci_dev *pdev)
+{
+	__hpsa_shutdown(pdev);
+	pci_disable_device(pdev);
+}
+
 static void hpsa_free_device_info(struct ctlr_info *h)
 {
 	int i;
@@ -8927,7 +8933,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 		scsi_remove_host(h->scsi_host);		/* init_one 8 */
 	/* includes hpsa_free_irqs - init_one 4 */
 	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
-	hpsa_shutdown(pdev);
+	__hpsa_shutdown(pdev);
 
 	hpsa_free_device_info(h);		/* scan */
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5] scsi: hpsa: disable device during shutdown
Date: Sat,  2 Jun 2018 00:28:53 -0400	[thread overview]
Message-ID: <1527913733-16492-1-git-send-email-okaya@codeaurora.org> (raw)

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port
service interrupts during reboot so that a newly started kexec kernel
wouldn't observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Disable device as part of the shutdown sequence.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable at vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
Tested-by: Don Brace <don.brace@microsemi.com>
Acked-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3a9eca1..b92f86a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8869,7 +8869,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 	kfree(options);
 }
 
-static void hpsa_shutdown(struct pci_dev *pdev)
+static void __hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
 
@@ -8884,6 +8884,12 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 }
 
+static void hpsa_shutdown(struct pci_dev *pdev)
+{
+	__hpsa_shutdown(pdev);
+	pci_disable_device(pdev);
+}
+
 static void hpsa_free_device_info(struct ctlr_info *h)
 {
 	int i;
@@ -8927,7 +8933,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 		scsi_remove_host(h->scsi_host);		/* init_one 8 */
 	/* includes hpsa_free_irqs - init_one 4 */
 	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
-	hpsa_shutdown(pdev);
+	__hpsa_shutdown(pdev);
 
 	hpsa_free_device_info(h);		/* scan */
 
-- 
2.7.4

             reply	other threads:[~2018-06-02  4:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-02  4:28 Sinan Kaya [this message]
2018-06-02  4:28 ` [PATCH V5] scsi: hpsa: disable device during shutdown Sinan Kaya
2018-06-02  4:28 ` Sinan Kaya
2018-06-02  4:28 ` Sinan Kaya
2018-06-06  1:19 ` Martin K. Petersen
2018-06-06  1:19   ` Martin K. Petersen
2018-06-06  1:19   ` Martin K. Petersen
2018-06-06  1:19   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527913733-16492-1-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=ryan@finnie.org \
    --cc=stable@vger.kernel.org \
    --cc=timur@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.