From: Abhinav Kumar <abhinavk@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: ryadav@codeaurora.org, linux-arm-msm@vger.kernel.org,
Abhinav Kumar <abhinavk@codeaurora.org>,
hoegsberg@google.com, chandanu@codeaurora.org
Subject: [DPU PATCH] drm/msm/dsi: configure VCO rate for 10nm PLL driver
Date: Thu, 14 Jun 2018 21:01:10 -0700 [thread overview]
Message-ID: <1529035270-32513-1-git-send-email-abhinavk@codeaurora.org> (raw)
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
---
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index c4c37a7..fb485cb 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -39,6 +39,8 @@
#define DSI_PIXEL_PLL_CLK 1
#define NUM_PROVIDED_CLKS 2
+#define VCO_REF_CLK_RATE 19200000
+
struct dsi_pll_regs {
u32 pll_prop_gain_rate;
u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
parent_rate);
pll_10nm->vco_current_rate = rate;
- pll_10nm->vco_ref_clk_rate = parent_rate;
+ pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
dsi_pll_setup_config(pll_10nm);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-06-15 4:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-15 4:01 Abhinav Kumar [this message]
2018-10-08 17:55 ` [DPU PATCH] drm/msm/dsi: configure VCO rate for 10nm PLL driver Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529035270-32513-1-git-send-email-abhinavk@codeaurora.org \
--to=abhinavk@codeaurora.org \
--cc=chandanu@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hoegsberg@google.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=ryadav@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.