All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: 20180509171342.846B9B2E@viggo.jf.intel.com,
	akpm@linux-foundation.org, alexander.levin@microsoft.com,
	dave.hansen@intel.com, dave.hansen@linux.intel.com,
	gregkh@linuxfoundation.org, linux-mm@kvack.org,
	linuxram@us.ibm.com, mingo@kernel.org, mpe@ellerman.id.au,
	peterz@infradead.org, shuah@kernel.org, tglx@linutronix.de,
	torvalds@linux-foundation.org
Cc: stable-commits@vger.kernel.org
Subject: Patch "x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal" has been added to the 4.16-stable tree
Date: Sun, 17 Jun 2018 13:23:54 +0200	[thread overview]
Message-ID: <152923463419263@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal

to the 4.16-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     x86-pkeys-selftests-remove-dead-debugging-code-fix-dprint_in_signal.patch
and it can be found in the queue-4.16 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Sun Jun 17 12:07:34 CEST 2018
From: Dave Hansen <dave.hansen@linux.intel.com>
Date: Wed, 9 May 2018 10:13:42 -0700
Subject: x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal

From: Dave Hansen <dave.hansen@linux.intel.com>

[ Upstream commit a50093d60464dd51d1ae0c2267b0abe9e1de77f3 ]

There is some noisy debug code at the end of the signal handler.  It was
disabled by an early, unconditional "return".  However, that return also
hid a dprint_in_signal=0, which kept dprint_in_signal=1 and effectively
locked us into permanent dprint_in_signal=1 behavior.

Remove the return and the dead code, fixing dprint_in_signal.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171342.846B9B2E@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/x86/protection_keys.c |   16 ----------------
 1 file changed, 16 deletions(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -325,22 +325,6 @@ void signal_handler(int signum, siginfo_
 	dprintf1("WARNING: set PRKU=0 to allow faulting instruction to continue\n");
 	pkru_faults++;
 	dprintf1("<<<<==================================================\n");
-	return;
-	if (trapno == 14) {
-		fprintf(stderr,
-			"ERROR: In signal handler, page fault, trapno = %d, ip = %016lx\n",
-			trapno, ip);
-		fprintf(stderr, "si_addr %p\n", si->si_addr);
-		fprintf(stderr, "REG_ERR: %lx\n",
-				(unsigned long)uctxt->uc_mcontext.gregs[REG_ERR]);
-		exit(1);
-	} else {
-		fprintf(stderr, "unexpected trap %d! at 0x%lx\n", trapno, ip);
-		fprintf(stderr, "si_addr %p\n", si->si_addr);
-		fprintf(stderr, "REG_ERR: %lx\n",
-				(unsigned long)uctxt->uc_mcontext.gregs[REG_ERR]);
-		exit(2);
-	}
 	dprint_in_signal = 0;
 }
 


Patches currently in stable-queue which might be from dave.hansen@linux.intel.com are

queue-4.16/x86-pkeys-selftests-factor-out-instruction-page.patch
queue-4.16/x86-pkeys-selftests-fix-pointer-math.patch
queue-4.16/x86-pkeys-selftests-adjust-the-self-test-to-fresh-distros-that-export-the-pkeys-abi.patch
queue-4.16/x86-pkeys-selftests-add-a-test-for-pkey-0.patch
queue-4.16/x86-pkeys-selftests-stop-using-assert.patch
queue-4.16/x86-pkeys-selftests-save-off-prot-for-allocations.patch
queue-4.16/x86-pkeys-selftests-remove-dead-debugging-code-fix-dprint_in_signal.patch
queue-4.16/x86-mpx-selftests-adjust-the-self-test-to-fresh-distros-that-export-the-mpx-abi.patch
queue-4.16/x86-pkeys-selftests-add-prot_exec-test.patch
queue-4.16/x86-pkeys-selftests-allow-faults-on-unknown-keys.patch
queue-4.16/x86-pkeys-selftests-give-better-unexpected-fault-error-messages.patch
queue-4.16/x86-pkeys-selftests-avoid-printf-in-signal-deadlocks.patch
queue-4.16/x86-pkeys-selftests-fix-pkey-exhaustion-test-off-by-one.patch

                 reply	other threads:[~2018-06-17 11:49 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=152923463419263@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=20180509171342.846B9B2E@viggo.jf.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=alexander.levin@microsoft.com \
    --cc=dave.hansen@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-mm@kvack.org \
    --cc=linuxram@us.ibm.com \
    --cc=mingo@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=peterz@infradead.org \
    --cc=shuah@kernel.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.