From: zhong jiang <zhongjiang@huawei.com> To: <john.garry@huawei.com>, <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>, <aacraid@microsemi.com> Cc: <andy.shevchenko@gmail.com>, <linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 4/4] drivers/scsi/mvsas/mv_init: Use dma_zalloc_coherent to replace dma_alloc_coherent+memset Date: Wed, 1 Aug 2018 21:26:16 +0800 [thread overview] Message-ID: <1533129976-51930-5-git-send-email-zhongjiang@huawei.com> (raw) In-Reply-To: <1533129976-51930-1-git-send-email-zhongjiang@huawei.com> The dma_zalloc_coherent is better than dma_alloc_coherent+memset, so replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> --- drivers/scsi/mvsas/mv_init.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 8c91637..da62e18 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -253,33 +253,29 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost) /* * alloc and init our DMA areas */ - mvi->tx = dma_alloc_coherent(mvi->dev, + mvi->tx = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ, &mvi->tx_dma, GFP_KERNEL); if (!mvi->tx) goto err_out; - memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ); - mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ, + mvi->rx_fis = dma_zalloc_coherent(mvi->dev, MVS_RX_FISL_SZ, &mvi->rx_fis_dma, GFP_KERNEL); if (!mvi->rx_fis) goto err_out; - memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ); - mvi->rx = dma_alloc_coherent(mvi->dev, + mvi->rx = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1), &mvi->rx_dma, GFP_KERNEL); if (!mvi->rx) goto err_out; - memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1)); mvi->rx[0] = cpu_to_le32(0xfff); mvi->rx_cons = 0xfff; - mvi->slot = dma_alloc_coherent(mvi->dev, + mvi->slot = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->slot) * slot_nr, &mvi->slot_dma, GFP_KERNEL); if (!mvi->slot) goto err_out; - memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr); mvi->bulk_buffer = dma_alloc_coherent(mvi->dev, TRASH_BUCKET_SIZE, -- 1.7.12.4
WARNING: multiple messages have this Message-ID (diff)
From: zhong jiang <zhongjiang@huawei.com> To: john.garry@huawei.com, jejb@linux.vnet.ibm.com, martin.petersen@oracle.com, aacraid@microsemi.com Cc: andy.shevchenko@gmail.com, linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 4/4] drivers/scsi/mvsas/mv_init: Use dma_zalloc_coherent to replace dma_alloc_coherent+memset Date: Wed, 1 Aug 2018 21:26:16 +0800 [thread overview] Message-ID: <1533129976-51930-5-git-send-email-zhongjiang@huawei.com> (raw) In-Reply-To: <1533129976-51930-1-git-send-email-zhongjiang@huawei.com> The dma_zalloc_coherent is better than dma_alloc_coherent+memset, so replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> --- drivers/scsi/mvsas/mv_init.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 8c91637..da62e18 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -253,33 +253,29 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost) /* * alloc and init our DMA areas */ - mvi->tx = dma_alloc_coherent(mvi->dev, + mvi->tx = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ, &mvi->tx_dma, GFP_KERNEL); if (!mvi->tx) goto err_out; - memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ); - mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ, + mvi->rx_fis = dma_zalloc_coherent(mvi->dev, MVS_RX_FISL_SZ, &mvi->rx_fis_dma, GFP_KERNEL); if (!mvi->rx_fis) goto err_out; - memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ); - mvi->rx = dma_alloc_coherent(mvi->dev, + mvi->rx = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1), &mvi->rx_dma, GFP_KERNEL); if (!mvi->rx) goto err_out; - memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1)); mvi->rx[0] = cpu_to_le32(0xfff); mvi->rx_cons = 0xfff; - mvi->slot = dma_alloc_coherent(mvi->dev, + mvi->slot = dma_zalloc_coherent(mvi->dev, sizeof(*mvi->slot) * slot_nr, &mvi->slot_dma, GFP_KERNEL); if (!mvi->slot) goto err_out; - memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr); mvi->bulk_buffer = dma_alloc_coherent(mvi->dev, TRASH_BUCKET_SIZE, -- 1.7.12.4
next prev parent reply other threads:[~2018-08-01 13:38 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-01 13:26 [PATCH 0/4] use dma_zalloc_coherent and vzalloc to replace open code zhong jiang 2018-08-01 13:26 ` zhong jiang 2018-08-01 13:26 ` [PATCH 1/4] driver/scsi/fnic/fnic_trace: Use vzalloc to zero instead of vmalloc+memset zhong jiang 2018-08-01 13:26 ` zhong jiang 2018-08-01 15:30 ` Andy Shevchenko 2018-08-01 15:47 ` Joe Perches 2018-08-02 6:16 ` zhong jiang 2018-08-02 6:16 ` zhong jiang 2018-08-01 13:26 ` [PATCH 2/4] drivers/scsi/dpt_i2o: Use dma_zalloc_coherent to repalce dma_alloc_coherent+memset zhong jiang 2018-08-01 13:26 ` zhong jiang 2018-08-01 15:32 ` Andy Shevchenko 2018-08-01 13:26 ` [PATCH 3/4] drivers/scsi/snic/snic_trc: Use vzalloc instead of vmalloc+memset zhong jiang 2018-08-01 13:26 ` zhong jiang 2018-08-01 15:33 ` Andy Shevchenko 2018-08-01 13:26 ` zhong jiang [this message] 2018-08-01 13:26 ` [PATCH 4/4] drivers/scsi/mvsas/mv_init: Use dma_zalloc_coherent to replace dma_alloc_coherent+memset zhong jiang 2018-08-01 15:34 ` Andy Shevchenko 2018-08-01 23:55 ` John Garry 2018-08-01 23:55 ` John Garry
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1533129976-51930-5-git-send-email-zhongjiang@huawei.com \ --to=zhongjiang@huawei.com \ --cc=aacraid@microsemi.com \ --cc=andy.shevchenko@gmail.com \ --cc=jejb@linux.vnet.ibm.com \ --cc=john.garry@huawei.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-scsi@vger.kernel.org \ --cc=martin.petersen@oracle.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.