From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> To: balbi@kernel.org Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-renesas-soc@vger.kernel.org, stable@vger.kernel.org, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH] usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0 Date: Fri, 3 Aug 2018 12:12:46 +0900 [thread overview] Message-ID: <1533265966-5766-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw) This patch fixes an issue that maxpacket size of ep0 is incorrect for SuperSpeed. Otherwise, CDC NCM class with SuperSpeed doesn't work correctly on this driver because its control read data size is more than 64 bytes. Reported-by: Junki Kato <junki.kato.xk@renesas.com> Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Junki Kato <junki.kato.xk@renesas.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 7cf98c7..5b5f1c8 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -787,12 +787,15 @@ static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3) switch (speed) { case USB_STA_SPEED_SS: usb3->gadget.speed = USB_SPEED_SUPER; + usb3->gadget.ep0->maxpacket = USB3_EP0_SS_MAX_PACKET_SIZE; break; case USB_STA_SPEED_HS: usb3->gadget.speed = USB_SPEED_HIGH; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; break; case USB_STA_SPEED_FS: usb3->gadget.speed = USB_SPEED_FULL; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; break; default: usb3->gadget.speed = USB_SPEED_UNKNOWN; @@ -2451,7 +2454,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, /* for control pipe */ usb3->gadget.ep0 = &usb3_ep->ep; usb_ep_set_maxpacket_limit(&usb3_ep->ep, - USB3_EP0_HSFS_MAX_PACKET_SIZE); + USB3_EP0_SS_MAX_PACKET_SIZE); usb3_ep->ep.caps.type_control = true; usb3_ep->ep.caps.dir_in = true; usb3_ep->ep.caps.dir_out = true; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> To: balbi@kernel.org Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-renesas-soc@vger.kernel.org, stable@vger.kernel.org, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0 Date: Fri, 3 Aug 2018 12:12:46 +0900 [thread overview] Message-ID: <1533265966-5766-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw) This patch fixes an issue that maxpacket size of ep0 is incorrect for SuperSpeed. Otherwise, CDC NCM class with SuperSpeed doesn't work correctly on this driver because its control read data size is more than 64 bytes. Reported-by: Junki Kato <junki.kato.xk@renesas.com> Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Junki Kato <junki.kato.xk@renesas.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 7cf98c7..5b5f1c8 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -787,12 +787,15 @@ static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3) switch (speed) { case USB_STA_SPEED_SS: usb3->gadget.speed = USB_SPEED_SUPER; + usb3->gadget.ep0->maxpacket = USB3_EP0_SS_MAX_PACKET_SIZE; break; case USB_STA_SPEED_HS: usb3->gadget.speed = USB_SPEED_HIGH; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; break; case USB_STA_SPEED_FS: usb3->gadget.speed = USB_SPEED_FULL; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; break; default: usb3->gadget.speed = USB_SPEED_UNKNOWN; @@ -2451,7 +2454,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, /* for control pipe */ usb3->gadget.ep0 = &usb3_ep->ep; usb_ep_set_maxpacket_limit(&usb3_ep->ep, - USB3_EP0_HSFS_MAX_PACKET_SIZE); + USB3_EP0_SS_MAX_PACKET_SIZE); usb3_ep->ep.caps.type_control = true; usb3_ep->ep.caps.dir_in = true; usb3_ep->ep.caps.dir_out = true;
next reply other threads:[~2018-08-03 5:08 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-03 3:12 Yoshihiro Shimoda [this message] 2018-08-03 3:12 ` usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0 Yoshihiro Shimoda
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1533265966-5766-1-git-send-email-yoshihiro.shimoda.uh@renesas.com \ --to=yoshihiro.shimoda.uh@renesas.com \ --cc=balbi@kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.