From: <patrice.chotard@st.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<linux@armlinux.org.uk>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<alexandre.torgue@st.com>, <lee.jones@linaro.org>
Cc: <mcoquelin.stm32@gmail.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
Patrice Chotard <patrice.chotard@st.com>
Subject: [PATCH 1/3] ARM: dts: stm32: Fix DT dtc warnings for stm32h7
Date: Tue, 7 Aug 2018 13:06:33 +0200 [thread overview]
Message-ID: <1533639995-27047-2-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1533639995-27047-1-git-send-email-patrice.chotard@st.com>
From: Patrice Chotard <patrice.chotard@st.com>
Fix the following DT dtc warnings for stm32h743 boards:
Warning (node_name_chars_strict): /clocks/i2s_ckin: Character '_' not recommended in node name
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usart1@0)
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usart2@0)
Warning (unique_unit_address): /soc/pin-controller/usart1@0: duplicate unit-address (also used in node /soc/pin-controller/usart2@0)
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unique_unit_address): /soc/pin-controller/usart1@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unique_unit_address): /soc/pin-controller/usart2@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unit_address_vs_reg): /soc/pin-controller/usbotg-hs@0: node has a unit name, but no reg property
Warning (avoid_unnecessary_addr_size): /soc/timer@58002c00: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Warning (avoid_unnecessary_addr_size): /soc/timer@58003000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 10 +++++-----
arch/arm/boot/dts/stm32h743.dtsi | 8 ++++----
arch/arm/boot/dts/stm32h743i-disco.dts | 2 +-
arch/arm/boot/dts/stm32h743i-eval.dts | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 24be8e63dec8..9d3ad89a4833 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -44,7 +44,7 @@
/ {
soc {
- pin-controller {
+ pin-controller@58020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32h743-pinctrl";
@@ -163,7 +163,7 @@
#interrupt-cells = <2>;
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins_a: i2c1 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
<STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
};
};
- usart1_pins: usart1@0 {
+ usart1_pins: usart1 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
bias-disable;
@@ -186,7 +186,7 @@
};
};
- usart2_pins: usart2@0 {
+ usart2_pins: usart2 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
bias-disable;
@@ -199,7 +199,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 637beffe5067..b2d4e0b5a9c3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -40,13 +40,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
@@ -60,7 +62,7 @@
clock-frequency = <32768>;
};
- clk_i2s: i2s_ckin {
+ clk_i2s: i2s-ckin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -422,7 +424,6 @@
};
lptimer4: timer@58002c00 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
@@ -438,7 +439,6 @@
};
lptimer5: timer@58003000 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 45e088c55741..666b067e43b8 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 3f8e0c4a998d..caaa93b1bcc0 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
reg = <0xd0000000 0x2000000>;
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <patrice.chotard@st.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
alexandre.torgue@st.com, lee.jones@linaro.org
Cc: mcoquelin.stm32@gmail.com,
linux-stm32@st-md-mailman.stormreply.com,
Patrice Chotard <patrice.chotard@st.com>
Subject: [PATCH 1/3] ARM: dts: stm32: Fix DT dtc warnings for stm32h7
Date: Tue, 7 Aug 2018 13:06:33 +0200 [thread overview]
Message-ID: <1533639995-27047-2-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1533639995-27047-1-git-send-email-patrice.chotard@st.com>
From: Patrice Chotard <patrice.chotard@st.com>
Fix the following DT dtc warnings for stm32h743 boards:
Warning (node_name_chars_strict): /clocks/i2s_ckin: Character '_' not recommended in node name
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usart1@0)
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usart2@0)
Warning (unique_unit_address): /soc/pin-controller/usart1@0: duplicate unit-address (also used in node /soc/pin-controller/usart2@0)
Warning (unique_unit_address): /soc/pin-controller/i2c1@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unique_unit_address): /soc/pin-controller/usart1@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unique_unit_address): /soc/pin-controller/usart2@0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs@0)
Warning (unit_address_vs_reg): /soc/pin-controller/usbotg-hs@0: node has a unit name, but no reg property
Warning (avoid_unnecessary_addr_size): /soc/timer@58002c00: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Warning (avoid_unnecessary_addr_size): /soc/timer@58003000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 10 +++++-----
arch/arm/boot/dts/stm32h743.dtsi | 8 ++++----
arch/arm/boot/dts/stm32h743i-disco.dts | 2 +-
arch/arm/boot/dts/stm32h743i-eval.dts | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 24be8e63dec8..9d3ad89a4833 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -44,7 +44,7 @@
/ {
soc {
- pin-controller {
+ pin-controller@58020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32h743-pinctrl";
@@ -163,7 +163,7 @@
#interrupt-cells = <2>;
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins_a: i2c1 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
<STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
};
};
- usart1_pins: usart1@0 {
+ usart1_pins: usart1 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
bias-disable;
@@ -186,7 +186,7 @@
};
};
- usart2_pins: usart2@0 {
+ usart2_pins: usart2 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
bias-disable;
@@ -199,7 +199,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 637beffe5067..b2d4e0b5a9c3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -40,13 +40,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
@@ -60,7 +62,7 @@
clock-frequency = <32768>;
};
- clk_i2s: i2s_ckin {
+ clk_i2s: i2s-ckin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -422,7 +424,6 @@
};
lptimer4: timer@58002c00 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
@@ -438,7 +439,6 @@
};
lptimer5: timer@58003000 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 45e088c55741..666b067e43b8 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 3f8e0c4a998d..caaa93b1bcc0 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@d0000000 {
reg = <0xd0000000 0x2000000>;
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: patrice.chotard@st.com (patrice.chotard at st.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: stm32: Fix DT dtc warnings for stm32h7
Date: Tue, 7 Aug 2018 13:06:33 +0200 [thread overview]
Message-ID: <1533639995-27047-2-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1533639995-27047-1-git-send-email-patrice.chotard@st.com>
From: Patrice Chotard <patrice.chotard@st.com>
Fix the following DT dtc warnings for stm32h743 boards:
Warning (node_name_chars_strict): /clocks/i2s_ckin: Character '_' not recommended in node name
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
Warning (unique_unit_address): /soc/pin-controller/i2c1 at 0: duplicate unit-address (also used in node /soc/pin-controller/usart1 at 0)
Warning (unique_unit_address): /soc/pin-controller/i2c1 at 0: duplicate unit-address (also used in node /soc/pin-controller/usart2 at 0)
Warning (unique_unit_address): /soc/pin-controller/usart1 at 0: duplicate unit-address (also used in node /soc/pin-controller/usart2 at 0)
Warning (unique_unit_address): /soc/pin-controller/i2c1 at 0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs at 0)
Warning (unique_unit_address): /soc/pin-controller/usart1 at 0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs at 0)
Warning (unique_unit_address): /soc/pin-controller/usart2 at 0: duplicate unit-address (also used in node /soc/pin-controller/usbotg-hs at 0)
Warning (unit_address_vs_reg): /soc/pin-controller/usbotg-hs at 0: node has a unit name, but no reg property
Warning (avoid_unnecessary_addr_size): /soc/timer at 58002c00: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Warning (avoid_unnecessary_addr_size): /soc/timer at 58003000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 10 +++++-----
arch/arm/boot/dts/stm32h743.dtsi | 8 ++++----
arch/arm/boot/dts/stm32h743i-disco.dts | 2 +-
arch/arm/boot/dts/stm32h743i-eval.dts | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 24be8e63dec8..9d3ad89a4833 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -44,7 +44,7 @@
/ {
soc {
- pin-controller {
+ pin-controller at 58020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32h743-pinctrl";
@@ -163,7 +163,7 @@
#interrupt-cells = <2>;
};
- i2c1_pins_a: i2c1 at 0 {
+ i2c1_pins_a: i2c1 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
<STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
};
};
- usart1_pins: usart1 at 0 {
+ usart1_pins: usart1 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
bias-disable;
@@ -186,7 +186,7 @@
};
};
- usart2_pins: usart2 at 0 {
+ usart2_pins: usart2 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
bias-disable;
@@ -199,7 +199,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs at 0 {
+ usbotg_hs_pins_a: usbotg-hs {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 637beffe5067..b2d4e0b5a9c3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -40,13 +40,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
@@ -60,7 +62,7 @@
clock-frequency = <32768>;
};
- clk_i2s: i2s_ckin {
+ clk_i2s: i2s-ckin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -422,7 +424,6 @@
};
lptimer4: timer at 58002c00 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
@@ -438,7 +439,6 @@
};
lptimer5: timer at 58003000 {
- #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 45e088c55741..666b067e43b8 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at d0000000 {
reg = <0xd0000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 3f8e0c4a998d..caaa93b1bcc0 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -53,7 +53,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at d0000000 {
reg = <0xd0000000 0x2000000>;
};
--
1.9.1
next prev parent reply other threads:[~2018-08-07 11:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-07 11:06 [PATCH 0/3] ARM: dts: stm32: Fix DT dtc warnings for STM32 MCU's patrice.chotard
2018-08-07 11:06 ` patrice.chotard at st.com
2018-08-07 11:06 ` patrice.chotard
2018-08-07 11:06 ` patrice.chotard [this message]
2018-08-07 11:06 ` [PATCH 1/3] ARM: dts: stm32: Fix DT dtc warnings for stm32h7 patrice.chotard at st.com
2018-08-07 11:06 ` patrice.chotard
2018-08-07 11:38 ` Alexandre Torgue
2018-08-07 11:38 ` Alexandre Torgue
2018-08-07 11:38 ` Alexandre Torgue
2018-08-07 11:56 ` Alexandre Torgue
2018-08-07 11:56 ` Alexandre Torgue
2018-08-07 11:56 ` Alexandre Torgue
2018-08-07 12:01 ` Patrice CHOTARD
2018-08-07 12:01 ` Patrice CHOTARD
2018-08-07 12:01 ` Patrice CHOTARD
2018-08-07 11:06 ` [PATCH 2/3] ARM: dts: stm32: Fix DT dtc warnings for stm32f7 patrice.chotard
2018-08-07 11:06 ` patrice.chotard at st.com
2018-08-07 11:06 ` patrice.chotard
2018-08-07 11:44 ` Alexandre Torgue
2018-08-07 11:44 ` Alexandre Torgue
2018-08-07 11:44 ` Alexandre Torgue
2018-08-07 11:06 ` [PATCH 3/3] ARM: dts: stm32: Fix DT dtc warnings for stm32f4 patrice.chotard
2018-08-07 11:06 ` patrice.chotard at st.com
2018-08-07 11:06 ` patrice.chotard
2018-08-07 11:44 ` Alexandre Torgue
2018-08-07 11:44 ` Alexandre Torgue
2018-08-07 11:44 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533639995-27047-2-git-send-email-patrice.chotard@st.com \
--to=patrice.chotard@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.