All of lore.kernel.org
 help / color / mirror / Atom feed
From: aisheng.dong@nxp.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 2/5] soc: imx: add SC firmware IPC and APIs
Date: Tue, 21 Aug 2018 00:08:22 +0800	[thread overview]
Message-ID: <1534781305-4770-3-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1534781305-4770-1-git-send-email-aisheng.dong@nxp.com>

The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).

This patch adds the SC firmware service APIs used by the system.
It mainly consists of two parts:
1) Implementation of the IPC functions using MUs (client side).
2) SCU firmware services APIs implemented based on RPC calls

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v4->v5:
 * switch to new generic MU binding.
   Use 8 separate mu channels in one MU instance for SCU communication
 * create struct sc_rpc_msg to separate the msg header and service,
   accordingly the old sc_rpc_msg_s with raw data union is removed.
   This can gain better readability.
 * remove defines like RPC_XXX(MSG)
 * remove unused types
 * headfiles cleanup
 * NOTE:
   With the new approach that uses 8 separate irq driven changes, i still
   did not find a clean way to better support receiving msg over 4 words.
   So the current driver does not support it.
   As in current SCU protocol, there's only a minor of commands need
   receiving msg over 4 words which is still not used by Linux, so it does
   not affect the normal function.
 * Know issue:
   The performance drops a lot after using 8 separate interrupt driven MUs
   to send/receive msgs.
   e.g. Sending a scu message with tx size 2 words and rx size 2 words:
   Former (polling) : < 10us to handle a SCU msg
   Now (irq) : 20~30 us to handle a SCU msg (Caused by interrupt latency)
v3->v4:
 * change to use mailbox
 * separate the IPC part and RPC API for easy review
 * headfiles cleanup
v2->v3:
 * add the ipc read/write error check
v1->v2:
 * change the type of sc_ipc_t from uint32_t to unsigned long.
   This can make it be capable of storing 64 bit pointer in ARMv8 system.
 * Update to use the new MU library implemenation (handle iomem privately)
 * remove unused delcarations e.g. sc_rpc_dispatch and sc_rpc_xlate.
 * remove unneeded pad ctl functions
---
 drivers/soc/imx/Kconfig       |   4 +
 drivers/soc/imx/Makefile      |   1 +
 drivers/soc/imx/sc/Makefile   |   2 +
 drivers/soc/imx/sc/main/ipc.c | 258 +++++++++++++++++
 drivers/soc/imx/sc/main/rpc.h |  51 ++++
 include/soc/imx/sc/ipc.h      |  46 +++
 include/soc/imx/sc/sci.h      |  16 ++
 include/soc/imx/sc/types.h    | 636 ++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 1014 insertions(+)
 create mode 100644 drivers/soc/imx/sc/Makefile
 create mode 100644 drivers/soc/imx/sc/main/ipc.c
 create mode 100644 drivers/soc/imx/sc/main/rpc.h
 create mode 100644 include/soc/imx/sc/ipc.h
 create mode 100644 include/soc/imx/sc/sci.h
 create mode 100644 include/soc/imx/sc/types.h

diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index a5b86a2..e3084d8 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -7,4 +7,8 @@ config IMX7_PM_DOMAINS
 	select PM_GENERIC_DOMAINS
 	default y if SOC_IMX7D
 
+config HAVE_IMX_SCU
+	bool
+	depends on IMX_MBOX
+
 endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index aab41a5c..be79f67 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o
+obj-$(CONFIG_HAVE_IMX_SCU) += sc/
diff --git a/drivers/soc/imx/sc/Makefile b/drivers/soc/imx/sc/Makefile
new file mode 100644
index 0000000..a3db142
--- /dev/null
+++ b/drivers/soc/imx/sc/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += main/ipc.o
diff --git a/drivers/soc/imx/sc/main/ipc.c b/drivers/soc/imx/sc/main/ipc.c
new file mode 100644
index 0000000..bc9e866
--- /dev/null
+++ b/drivers/soc/imx/sc/main/ipc.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * Implementation of the IPC functions using MUs (client side).
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "rpc.h"
+
+#define SCU_MU_CHAN_NUM		8
+#define MAX_RX_TIMEOUT		(msecs_to_jiffies(30))
+
+struct sc_chan {
+	struct sc_ipc *sc_ipc;
+
+	struct mbox_client cl;
+	struct mbox_chan *ch;
+	int idx;
+};
+
+struct sc_ipc {
+	/* SCU uses 4 Tx and 4 Rx channels */
+	struct sc_chan chans[SCU_MU_CHAN_NUM];
+	struct device *dev;
+	struct mutex lock;
+	struct completion done;
+
+	/* temporarily store the SCU msg */
+	u32 *msg;
+	u8 rx_size;
+	u8 count;
+};
+
+static sc_ipc_t scu_ipc_handle;
+
+/*
+ * Get the default handle used by SCU
+ */
+int sc_ipc_get_handle(sc_ipc_t *ipc)
+{
+	if (!scu_ipc_handle)
+		return -EPROBE_DEFER;
+
+	*ipc = scu_ipc_handle;
+	return 0;
+}
+EXPORT_SYMBOL(sc_ipc_get_handle);
+
+static void sc_rx_callback(struct mbox_client *c, void *msg)
+{
+	struct sc_chan *sc_chan = container_of(c, struct sc_chan, cl);
+	struct sc_ipc *sc_ipc = sc_chan->sc_ipc;
+	struct sc_rpc_msg *hdr;
+	u32 *data = msg;
+
+	if (sc_chan->idx == 0) {
+		hdr = msg;
+		sc_ipc->rx_size = hdr->size;
+		dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
+		if (sc_ipc->rx_size > 4)
+			dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
+				 sc_ipc->rx_size);
+	}
+
+	sc_ipc->msg[sc_chan->idx] = *data;
+	sc_ipc->count++;
+
+	dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
+		sc_ipc->count, *data);
+
+	if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
+		complete(&sc_ipc->done);
+}
+
+int sc_ipc_write(struct sc_ipc *sc_ipc, void *msg)
+{
+	struct sc_rpc_msg *hdr = msg;
+	struct sc_chan *sc_chan;
+	u32 *data = msg;
+	int ret;
+	int i;
+
+	/* Check size */
+	if (hdr->size > SC_RPC_MAX_MSG)
+		return -EINVAL;
+
+	dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
+		hdr->func, hdr->size);
+
+	for (i = 0; i < hdr->size; i++) {
+		sc_chan = &sc_ipc->chans[i % 4];
+		ret = mbox_send_message(sc_chan->ch, &data[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * RPC command/response
+ */
+int sc_call_rpc(sc_ipc_t ipc, void *msg, bool no_resp)
+{
+	struct sc_ipc *sc_ipc = (struct sc_ipc *)ipc;
+	int ret;
+
+	if (WARN_ON(!sc_ipc || !msg))
+		return -EINVAL;
+
+	mutex_lock(&sc_ipc->lock);
+	reinit_completion(&sc_ipc->done);
+
+	sc_ipc->msg = msg;
+	sc_ipc->count = 0;
+	ret = sc_ipc_write(sc_ipc, msg);
+	if (ret < 0) {
+		dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
+		goto out;
+	}
+
+	if (!no_resp) {
+		if (!wait_for_completion_timeout(&sc_ipc->done,
+						 MAX_RX_TIMEOUT)) {
+			dev_err(sc_ipc->dev, "RPC send msg timeout\n");
+			return -ETIMEDOUT;
+		}
+		ret = 0;
+	}
+out:
+	mutex_unlock(&sc_ipc->lock);
+
+	dev_dbg(sc_ipc->dev, "RPC SVC done\n");
+
+	return ret;
+}
+
+/*
+ * Open an IPC channel
+ */
+int sc_ipc_open(sc_ipc_t *ipc, struct device *dev)
+{
+	struct sc_ipc *sc_ipc;
+	struct sc_chan *sc_chan;
+	struct mbox_client *cl;
+	char *chan_name;
+	int ret;
+	int i;
+
+	sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
+	if (!sc_ipc)
+		return -ENOMEM;
+
+	for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
+		if (i < 4)
+			chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
+		else
+			chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
+
+		if (!chan_name)
+			return -ENOMEM;
+
+		sc_chan = &sc_ipc->chans[i];
+		cl = &sc_chan->cl;
+		cl->dev = dev;
+		cl->tx_block = false;
+		cl->knows_txdone = true;
+		cl->rx_callback = sc_rx_callback;
+
+		sc_chan->sc_ipc = sc_ipc;
+		sc_chan->idx = i % 4;
+		sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
+		if (IS_ERR(sc_chan->ch)) {
+			ret = PTR_ERR(sc_chan->ch);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get mbox %d\n", ret);
+
+			return ret;
+		}
+
+		dev_dbg(dev, "mbox request chan %s\n", chan_name);
+		/* chan_name is not used anymore by framework */
+		kfree(chan_name);
+	}
+
+	sc_ipc->dev = dev;
+	mutex_init(&sc_ipc->lock);
+	init_completion(&sc_ipc->done);
+
+	*ipc = (sc_ipc_t)sc_ipc;
+
+	return 0;
+}
+EXPORT_SYMBOL(sc_ipc_open);
+
+/*
+ * Close an IPC channel
+ */
+void sc_ipc_close(sc_ipc_t ipc)
+{
+	struct sc_ipc *sc_ipc = (struct sc_ipc *)ipc;
+	struct sc_chan *sc_chan;
+	int i;
+
+	WARN_ON(!sc_ipc);
+
+	/* we do not free the default ipc handle */
+	if (ipc == scu_ipc_handle)
+		return;
+
+	for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
+		sc_chan = &sc_ipc->chans[i];
+		mbox_free_channel(sc_chan->ch);
+	}
+
+	devm_kfree(sc_ipc->dev, sc_ipc);
+}
+EXPORT_SYMBOL(sc_ipc_close);
+
+static int imx_sc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = sc_ipc_open(&scu_ipc_handle, dev);
+	if (ret)
+		return ret;
+
+	pr_info("NXP i.MX SCU Initialized\n");
+
+	return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id imx_sc_match[] = {
+	{ .compatible = "fsl,imx-scu", },
+	{ /* Sentinel */ }
+};
+
+static struct platform_driver imx_sc_driver = {
+	.driver = {
+		.name = "imx-scu",
+		.of_match_table = imx_sc_match,
+	},
+	.probe = imx_sc_probe,
+};
+builtin_platform_driver(imx_sc_driver);
diff --git a/drivers/soc/imx/sc/main/rpc.h b/drivers/soc/imx/sc/main/rpc.h
new file mode 100644
index 0000000..93e66e5
--- /dev/null
+++ b/drivers/soc/imx/sc/main/rpc.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file for the RPC implementation.
+ */
+
+#ifndef _SC_RPC_H
+#define _SC_RPC_H
+
+#include <soc/imx/sc/types.h>
+#include <soc/imx/sc/ipc.h>
+
+#define SC_RPC_VERSION		1
+
+#define SC_RPC_MAX_MSG		8
+
+enum sc_rpc_svc_e {
+	SC_RPC_SVC_UNKNOWN = 0,
+	SC_RPC_SVC_RETURN = 1,
+	SC_RPC_SVC_PM = 2,
+	SC_RPC_SVC_RM = 3,
+	SC_RPC_SVC_TIMER = 5,
+	SC_RPC_SVC_PAD = 6,
+	SC_RPC_SVC_MISC = 7,
+	SC_RPC_SVC_IRQ = 8,
+	SC_RPC_SVC_ABORT = 9
+};
+
+struct sc_rpc_msg {
+	uint8_t ver;
+	uint8_t size;
+	uint8_t svc;
+	uint8_t func;
+};
+
+/*
+ * This is an internal function to send an RPC message over an IPC
+ * channel. It is called by client-side SCFW API function shims.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in,out] msg         handle to a message
+ * @param[in]     no_resp     response flag
+ *
+ * If no_resp is false then this function waits for a response
+ * and returns the result in msg.
+ */
+int sc_call_rpc(sc_ipc_t ipc, void *msg, bool no_resp);
+
+#endif /* _SC_RPC_H */
diff --git a/include/soc/imx/sc/ipc.h b/include/soc/imx/sc/ipc.h
new file mode 100644
index 0000000..cb26935
--- /dev/null
+++ b/include/soc/imx/sc/ipc.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file for the IPC implementation.
+ */
+
+#ifndef _SC_IPC_H
+#define _SC_IPC_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+/*
+ * This type is used to declare a handle for an IPC communication
+ * channel. Its meaning is specific to the IPC implementation.
+ */
+typedef unsigned long sc_ipc_t;
+
+/*
+ * This function opens an IPC channel.
+ *
+ * @param [out]	ipc	return pointer for ipc handle
+ * @param [in]	dev	device to open mu channel
+ *
+ * @return Returns an error code (0 = success, failed if < 0)
+ */
+int sc_ipc_open(sc_ipc_t *ipc, struct device *dev);
+
+/*
+ * This function closes an IPC channel.
+ *
+ * @param[in]	ipc	id of channel to close
+ */
+void sc_ipc_close(sc_ipc_t ipc);
+
+/*
+ * This function gets the default ipc handle used by SCU
+ *
+ * @param[out]	ipc	id of channel to close
+ *
+ * @return Returns an error code (0 = success, failed if < 0)
+ */
+int sc_ipc_get_handle(sc_ipc_t *ipc);
+#endif /* _SC_IPC_H */
diff --git a/include/soc/imx/sc/sci.h b/include/soc/imx/sc/sci.h
new file mode 100644
index 0000000..de3892a
--- /dev/null
+++ b/include/soc/imx/sc/sci.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file containing the public System Controller Interface (SCI)
+ * definitions.
+ */
+
+#ifndef _SC_SCI_H
+#define _SC_SCI_H
+
+#include <soc/imx/sc/ipc.h>
+#include <soc/imx/sc/types.h>
+
+#endif /* _SC_SCI_H */
diff --git a/include/soc/imx/sc/types.h b/include/soc/imx/sc/types.h
new file mode 100644
index 0000000..e56265e
--- /dev/null
+++ b/include/soc/imx/sc/types.h
@@ -0,0 +1,636 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file containing types used across multiple service APIs.
+ */
+
+#ifndef _SC_TYPES_H
+#define _SC_TYPES_H
+
+/*
+ * This type is used to indicate error response for most functions.
+ */
+typedef enum sc_err_e {
+	SC_ERR_NONE = 0,	/* Success */
+	SC_ERR_VERSION = 1,	/* Incompatible API version */
+	SC_ERR_CONFIG = 2,	/* Configuration error */
+	SC_ERR_PARM = 3,	/* Bad parameter */
+	SC_ERR_NOACCESS = 4,	/* Permission error (no access) */
+	SC_ERR_LOCKED = 5,	/* Permission error (locked) */
+	SC_ERR_UNAVAILABLE = 6,	/* Unavailable (out of resources) */
+	SC_ERR_NOTFOUND = 7,	/* Not found */
+	SC_ERR_NOPOWER = 8,	/* No power */
+	SC_ERR_IPC = 9,		/* Generic IPC error */
+	SC_ERR_BUSY = 10,	/* Resource is currently busy/active */
+	SC_ERR_FAIL = 11,	/* General I/O failure */
+	SC_ERR_LAST
+} sc_err_t;
+
+/*
+ * This type is used to indicate a resource. Resources include peripherals
+ * and bus masters (but not memory regions). Note items from list should
+ * never be changed or removed (only added to at the end of the list).
+ */
+typedef enum sc_rsrc_e {
+	SC_R_A53 = 0,
+	SC_R_A53_0 = 1,
+	SC_R_A53_1 = 2,
+	SC_R_A53_2 = 3,
+	SC_R_A53_3 = 4,
+	SC_R_A72 = 5,
+	SC_R_A72_0 = 6,
+	SC_R_A72_1 = 7,
+	SC_R_A72_2 = 8,
+	SC_R_A72_3 = 9,
+	SC_R_CCI = 10,
+	SC_R_DB = 11,
+	SC_R_DRC_0 = 12,
+	SC_R_DRC_1 = 13,
+	SC_R_GIC_SMMU = 14,
+	SC_R_IRQSTR_M4_0 = 15,
+	SC_R_IRQSTR_M4_1 = 16,
+	SC_R_SMMU = 17,
+	SC_R_GIC = 18,
+	SC_R_DC_0_BLIT0 = 19,
+	SC_R_DC_0_BLIT1 = 20,
+	SC_R_DC_0_BLIT2 = 21,
+	SC_R_DC_0_BLIT_OUT = 22,
+	SC_R_DC_0_CAPTURE0 = 23,
+	SC_R_DC_0_CAPTURE1 = 24,
+	SC_R_DC_0_WARP = 25,
+	SC_R_DC_0_INTEGRAL0 = 26,
+	SC_R_DC_0_INTEGRAL1 = 27,
+	SC_R_DC_0_VIDEO0 = 28,
+	SC_R_DC_0_VIDEO1 = 29,
+	SC_R_DC_0_FRAC0 = 30,
+	SC_R_DC_0_FRAC1 = 31,
+	SC_R_DC_0 = 32,
+	SC_R_GPU_2_PID0 = 33,
+	SC_R_DC_0_PLL_0 = 34,
+	SC_R_DC_0_PLL_1 = 35,
+	SC_R_DC_1_BLIT0 = 36,
+	SC_R_DC_1_BLIT1 = 37,
+	SC_R_DC_1_BLIT2 = 38,
+	SC_R_DC_1_BLIT_OUT = 39,
+	SC_R_DC_1_CAPTURE0 = 40,
+	SC_R_DC_1_CAPTURE1 = 41,
+	SC_R_DC_1_WARP = 42,
+	SC_R_DC_1_INTEGRAL0 = 43,
+	SC_R_DC_1_INTEGRAL1 = 44,
+	SC_R_DC_1_VIDEO0 = 45,
+	SC_R_DC_1_VIDEO1 = 46,
+	SC_R_DC_1_FRAC0 = 47,
+	SC_R_DC_1_FRAC1 = 48,
+	SC_R_DC_1 = 49,
+	SC_R_GPU_3_PID0 = 50,
+	SC_R_DC_1_PLL_0 = 51,
+	SC_R_DC_1_PLL_1 = 52,
+	SC_R_SPI_0 = 53,
+	SC_R_SPI_1 = 54,
+	SC_R_SPI_2 = 55,
+	SC_R_SPI_3 = 56,
+	SC_R_UART_0 = 57,
+	SC_R_UART_1 = 58,
+	SC_R_UART_2 = 59,
+	SC_R_UART_3 = 60,
+	SC_R_UART_4 = 61,
+	SC_R_EMVSIM_0 = 62,
+	SC_R_EMVSIM_1 = 63,
+	SC_R_DMA_0_CH0 = 64,
+	SC_R_DMA_0_CH1 = 65,
+	SC_R_DMA_0_CH2 = 66,
+	SC_R_DMA_0_CH3 = 67,
+	SC_R_DMA_0_CH4 = 68,
+	SC_R_DMA_0_CH5 = 69,
+	SC_R_DMA_0_CH6 = 70,
+	SC_R_DMA_0_CH7 = 71,
+	SC_R_DMA_0_CH8 = 72,
+	SC_R_DMA_0_CH9 = 73,
+	SC_R_DMA_0_CH10 = 74,
+	SC_R_DMA_0_CH11 = 75,
+	SC_R_DMA_0_CH12 = 76,
+	SC_R_DMA_0_CH13 = 77,
+	SC_R_DMA_0_CH14 = 78,
+	SC_R_DMA_0_CH15 = 79,
+	SC_R_DMA_0_CH16 = 80,
+	SC_R_DMA_0_CH17 = 81,
+	SC_R_DMA_0_CH18 = 82,
+	SC_R_DMA_0_CH19 = 83,
+	SC_R_DMA_0_CH20 = 84,
+	SC_R_DMA_0_CH21 = 85,
+	SC_R_DMA_0_CH22 = 86,
+	SC_R_DMA_0_CH23 = 87,
+	SC_R_DMA_0_CH24 = 88,
+	SC_R_DMA_0_CH25 = 89,
+	SC_R_DMA_0_CH26 = 90,
+	SC_R_DMA_0_CH27 = 91,
+	SC_R_DMA_0_CH28 = 92,
+	SC_R_DMA_0_CH29 = 93,
+	SC_R_DMA_0_CH30 = 94,
+	SC_R_DMA_0_CH31 = 95,
+	SC_R_I2C_0 = 96,
+	SC_R_I2C_1 = 97,
+	SC_R_I2C_2 = 98,
+	SC_R_I2C_3 = 99,
+	SC_R_I2C_4 = 100,
+	SC_R_ADC_0 = 101,
+	SC_R_ADC_1 = 102,
+	SC_R_FTM_0 = 103,
+	SC_R_FTM_1 = 104,
+	SC_R_CAN_0 = 105,
+	SC_R_CAN_1 = 106,
+	SC_R_CAN_2 = 107,
+	SC_R_DMA_1_CH0 = 108,
+	SC_R_DMA_1_CH1 = 109,
+	SC_R_DMA_1_CH2 = 110,
+	SC_R_DMA_1_CH3 = 111,
+	SC_R_DMA_1_CH4 = 112,
+	SC_R_DMA_1_CH5 = 113,
+	SC_R_DMA_1_CH6 = 114,
+	SC_R_DMA_1_CH7 = 115,
+	SC_R_DMA_1_CH8 = 116,
+	SC_R_DMA_1_CH9 = 117,
+	SC_R_DMA_1_CH10 = 118,
+	SC_R_DMA_1_CH11 = 119,
+	SC_R_DMA_1_CH12 = 120,
+	SC_R_DMA_1_CH13 = 121,
+	SC_R_DMA_1_CH14 = 122,
+	SC_R_DMA_1_CH15 = 123,
+	SC_R_DMA_1_CH16 = 124,
+	SC_R_DMA_1_CH17 = 125,
+	SC_R_DMA_1_CH18 = 126,
+	SC_R_DMA_1_CH19 = 127,
+	SC_R_DMA_1_CH20 = 128,
+	SC_R_DMA_1_CH21 = 129,
+	SC_R_DMA_1_CH22 = 130,
+	SC_R_DMA_1_CH23 = 131,
+	SC_R_DMA_1_CH24 = 132,
+	SC_R_DMA_1_CH25 = 133,
+	SC_R_DMA_1_CH26 = 134,
+	SC_R_DMA_1_CH27 = 135,
+	SC_R_DMA_1_CH28 = 136,
+	SC_R_DMA_1_CH29 = 137,
+	SC_R_DMA_1_CH30 = 138,
+	SC_R_DMA_1_CH31 = 139,
+	SC_R_UNUSED1 = 140,
+	SC_R_UNUSED2 = 141,
+	SC_R_UNUSED3 = 142,
+	SC_R_UNUSED4 = 143,
+	SC_R_GPU_0_PID0 = 144,
+	SC_R_GPU_0_PID1 = 145,
+	SC_R_GPU_0_PID2 = 146,
+	SC_R_GPU_0_PID3 = 147,
+	SC_R_GPU_1_PID0 = 148,
+	SC_R_GPU_1_PID1 = 149,
+	SC_R_GPU_1_PID2 = 150,
+	SC_R_GPU_1_PID3 = 151,
+	SC_R_PCIE_A = 152,
+	SC_R_SERDES_0 = 153,
+	SC_R_MATCH_0 = 154,
+	SC_R_MATCH_1 = 155,
+	SC_R_MATCH_2 = 156,
+	SC_R_MATCH_3 = 157,
+	SC_R_MATCH_4 = 158,
+	SC_R_MATCH_5 = 159,
+	SC_R_MATCH_6 = 160,
+	SC_R_MATCH_7 = 161,
+	SC_R_MATCH_8 = 162,
+	SC_R_MATCH_9 = 163,
+	SC_R_MATCH_10 = 164,
+	SC_R_MATCH_11 = 165,
+	SC_R_MATCH_12 = 166,
+	SC_R_MATCH_13 = 167,
+	SC_R_MATCH_14 = 168,
+	SC_R_PCIE_B = 169,
+	SC_R_SATA_0 = 170,
+	SC_R_SERDES_1 = 171,
+	SC_R_HSIO_GPIO = 172,
+	SC_R_MATCH_15 = 173,
+	SC_R_MATCH_16 = 174,
+	SC_R_MATCH_17 = 175,
+	SC_R_MATCH_18 = 176,
+	SC_R_MATCH_19 = 177,
+	SC_R_MATCH_20 = 178,
+	SC_R_MATCH_21 = 179,
+	SC_R_MATCH_22 = 180,
+	SC_R_MATCH_23 = 181,
+	SC_R_MATCH_24 = 182,
+	SC_R_MATCH_25 = 183,
+	SC_R_MATCH_26 = 184,
+	SC_R_MATCH_27 = 185,
+	SC_R_MATCH_28 = 186,
+	SC_R_LCD_0 = 187,
+	SC_R_LCD_0_PWM_0 = 188,
+	SC_R_LCD_0_I2C_0 = 189,
+	SC_R_LCD_0_I2C_1 = 190,
+	SC_R_PWM_0 = 191,
+	SC_R_PWM_1 = 192,
+	SC_R_PWM_2 = 193,
+	SC_R_PWM_3 = 194,
+	SC_R_PWM_4 = 195,
+	SC_R_PWM_5 = 196,
+	SC_R_PWM_6 = 197,
+	SC_R_PWM_7 = 198,
+	SC_R_GPIO_0 = 199,
+	SC_R_GPIO_1 = 200,
+	SC_R_GPIO_2 = 201,
+	SC_R_GPIO_3 = 202,
+	SC_R_GPIO_4 = 203,
+	SC_R_GPIO_5 = 204,
+	SC_R_GPIO_6 = 205,
+	SC_R_GPIO_7 = 206,
+	SC_R_GPT_0 = 207,
+	SC_R_GPT_1 = 208,
+	SC_R_GPT_2 = 209,
+	SC_R_GPT_3 = 210,
+	SC_R_GPT_4 = 211,
+	SC_R_KPP = 212,
+	SC_R_MU_0A = 213,
+	SC_R_MU_1A = 214,
+	SC_R_MU_2A = 215,
+	SC_R_MU_3A = 216,
+	SC_R_MU_4A = 217,
+	SC_R_MU_5A = 218,
+	SC_R_MU_6A = 219,
+	SC_R_MU_7A = 220,
+	SC_R_MU_8A = 221,
+	SC_R_MU_9A = 222,
+	SC_R_MU_10A = 223,
+	SC_R_MU_11A = 224,
+	SC_R_MU_12A = 225,
+	SC_R_MU_13A = 226,
+	SC_R_MU_5B = 227,
+	SC_R_MU_6B = 228,
+	SC_R_MU_7B = 229,
+	SC_R_MU_8B = 230,
+	SC_R_MU_9B = 231,
+	SC_R_MU_10B = 232,
+	SC_R_MU_11B = 233,
+	SC_R_MU_12B = 234,
+	SC_R_MU_13B = 235,
+	SC_R_ROM_0 = 236,
+	SC_R_FSPI_0 = 237,
+	SC_R_FSPI_1 = 238,
+	SC_R_IEE = 239,
+	SC_R_IEE_R0 = 240,
+	SC_R_IEE_R1 = 241,
+	SC_R_IEE_R2 = 242,
+	SC_R_IEE_R3 = 243,
+	SC_R_IEE_R4 = 244,
+	SC_R_IEE_R5 = 245,
+	SC_R_IEE_R6 = 246,
+	SC_R_IEE_R7 = 247,
+	SC_R_SDHC_0 = 248,
+	SC_R_SDHC_1 = 249,
+	SC_R_SDHC_2 = 250,
+	SC_R_ENET_0 = 251,
+	SC_R_ENET_1 = 252,
+	SC_R_MLB_0 = 253,
+	SC_R_DMA_2_CH0 = 254,
+	SC_R_DMA_2_CH1 = 255,
+	SC_R_DMA_2_CH2 = 256,
+	SC_R_DMA_2_CH3 = 257,
+	SC_R_DMA_2_CH4 = 258,
+	SC_R_USB_0 = 259,
+	SC_R_USB_1 = 260,
+	SC_R_USB_0_PHY = 261,
+	SC_R_USB_2 = 262,
+	SC_R_USB_2_PHY = 263,
+	SC_R_DTCP = 264,
+	SC_R_NAND = 265,
+	SC_R_LVDS_0 = 266,
+	SC_R_LVDS_0_PWM_0 = 267,
+	SC_R_LVDS_0_I2C_0 = 268,
+	SC_R_LVDS_0_I2C_1 = 269,
+	SC_R_LVDS_1 = 270,
+	SC_R_LVDS_1_PWM_0 = 271,
+	SC_R_LVDS_1_I2C_0 = 272,
+	SC_R_LVDS_1_I2C_1 = 273,
+	SC_R_LVDS_2 = 274,
+	SC_R_LVDS_2_PWM_0 = 275,
+	SC_R_LVDS_2_I2C_0 = 276,
+	SC_R_LVDS_2_I2C_1 = 277,
+	SC_R_M4_0_PID0 = 278,
+	SC_R_M4_0_PID1 = 279,
+	SC_R_M4_0_PID2 = 280,
+	SC_R_M4_0_PID3 = 281,
+	SC_R_M4_0_PID4 = 282,
+	SC_R_M4_0_RGPIO = 283,
+	SC_R_M4_0_SEMA42 = 284,
+	SC_R_M4_0_TPM = 285,
+	SC_R_M4_0_PIT = 286,
+	SC_R_M4_0_UART = 287,
+	SC_R_M4_0_I2C = 288,
+	SC_R_M4_0_INTMUX = 289,
+	SC_R_M4_0_SIM = 290,
+	SC_R_M4_0_WDOG = 291,
+	SC_R_M4_0_MU_0B = 292,
+	SC_R_M4_0_MU_0A0 = 293,
+	SC_R_M4_0_MU_0A1 = 294,
+	SC_R_M4_0_MU_0A2 = 295,
+	SC_R_M4_0_MU_0A3 = 296,
+	SC_R_M4_0_MU_1A = 297,
+	SC_R_M4_1_PID0 = 298,
+	SC_R_M4_1_PID1 = 299,
+	SC_R_M4_1_PID2 = 300,
+	SC_R_M4_1_PID3 = 301,
+	SC_R_M4_1_PID4 = 302,
+	SC_R_M4_1_RGPIO = 303,
+	SC_R_M4_1_SEMA42 = 304,
+	SC_R_M4_1_TPM = 305,
+	SC_R_M4_1_PIT = 306,
+	SC_R_M4_1_UART = 307,
+	SC_R_M4_1_I2C = 308,
+	SC_R_M4_1_INTMUX = 309,
+	SC_R_M4_1_SIM = 310,
+	SC_R_M4_1_WDOG = 311,
+	SC_R_M4_1_MU_0B = 312,
+	SC_R_M4_1_MU_0A0 = 313,
+	SC_R_M4_1_MU_0A1 = 314,
+	SC_R_M4_1_MU_0A2 = 315,
+	SC_R_M4_1_MU_0A3 = 316,
+	SC_R_M4_1_MU_1A = 317,
+	SC_R_SAI_0 = 318,
+	SC_R_SAI_1 = 319,
+	SC_R_SAI_2 = 320,
+	SC_R_IRQSTR_SCU2 = 321,
+	SC_R_IRQSTR_DSP = 322,
+	SC_R_UNUSED5 = 323,
+	SC_R_UNUSED6 = 324,
+	SC_R_AUDIO_PLL_0 = 325,
+	SC_R_PI_0 = 326,
+	SC_R_PI_0_PWM_0 = 327,
+	SC_R_PI_0_PWM_1 = 328,
+	SC_R_PI_0_I2C_0 = 329,
+	SC_R_PI_0_PLL = 330,
+	SC_R_PI_1 = 331,
+	SC_R_PI_1_PWM_0 = 332,
+	SC_R_PI_1_PWM_1 = 333,
+	SC_R_PI_1_I2C_0 = 334,
+	SC_R_PI_1_PLL = 335,
+	SC_R_SC_PID0 = 336,
+	SC_R_SC_PID1 = 337,
+	SC_R_SC_PID2 = 338,
+	SC_R_SC_PID3 = 339,
+	SC_R_SC_PID4 = 340,
+	SC_R_SC_SEMA42 = 341,
+	SC_R_SC_TPM = 342,
+	SC_R_SC_PIT = 343,
+	SC_R_SC_UART = 344,
+	SC_R_SC_I2C = 345,
+	SC_R_SC_MU_0B = 346,
+	SC_R_SC_MU_0A0 = 347,
+	SC_R_SC_MU_0A1 = 348,
+	SC_R_SC_MU_0A2 = 349,
+	SC_R_SC_MU_0A3 = 350,
+	SC_R_SC_MU_1A = 351,
+	SC_R_SYSCNT_RD = 352,
+	SC_R_SYSCNT_CMP = 353,
+	SC_R_DEBUG = 354,
+	SC_R_SYSTEM = 355,
+	SC_R_SNVS = 356,
+	SC_R_OTP = 357,
+	SC_R_VPU_PID0 = 358,
+	SC_R_VPU_PID1 = 359,
+	SC_R_VPU_PID2 = 360,
+	SC_R_VPU_PID3 = 361,
+	SC_R_VPU_PID4 = 362,
+	SC_R_VPU_PID5 = 363,
+	SC_R_VPU_PID6 = 364,
+	SC_R_VPU_PID7 = 365,
+	SC_R_VPU_UART = 366,
+	SC_R_VPUCORE = 367,
+	SC_R_VPUCORE_0 = 368,
+	SC_R_VPUCORE_1 = 369,
+	SC_R_VPUCORE_2 = 370,
+	SC_R_VPUCORE_3 = 371,
+	SC_R_DMA_4_CH0 = 372,
+	SC_R_DMA_4_CH1 = 373,
+	SC_R_DMA_4_CH2 = 374,
+	SC_R_DMA_4_CH3 = 375,
+	SC_R_DMA_4_CH4 = 376,
+	SC_R_ISI_CH0 = 377,
+	SC_R_ISI_CH1 = 378,
+	SC_R_ISI_CH2 = 379,
+	SC_R_ISI_CH3 = 380,
+	SC_R_ISI_CH4 = 381,
+	SC_R_ISI_CH5 = 382,
+	SC_R_ISI_CH6 = 383,
+	SC_R_ISI_CH7 = 384,
+	SC_R_MJPEG_DEC_S0 = 385,
+	SC_R_MJPEG_DEC_S1 = 386,
+	SC_R_MJPEG_DEC_S2 = 387,
+	SC_R_MJPEG_DEC_S3 = 388,
+	SC_R_MJPEG_ENC_S0 = 389,
+	SC_R_MJPEG_ENC_S1 = 390,
+	SC_R_MJPEG_ENC_S2 = 391,
+	SC_R_MJPEG_ENC_S3 = 392,
+	SC_R_MIPI_0 = 393,
+	SC_R_MIPI_0_PWM_0 = 394,
+	SC_R_MIPI_0_I2C_0 = 395,
+	SC_R_MIPI_0_I2C_1 = 396,
+	SC_R_MIPI_1 = 397,
+	SC_R_MIPI_1_PWM_0 = 398,
+	SC_R_MIPI_1_I2C_0 = 399,
+	SC_R_MIPI_1_I2C_1 = 400,
+	SC_R_CSI_0 = 401,
+	SC_R_CSI_0_PWM_0 = 402,
+	SC_R_CSI_0_I2C_0 = 403,
+	SC_R_CSI_1 = 404,
+	SC_R_CSI_1_PWM_0 = 405,
+	SC_R_CSI_1_I2C_0 = 406,
+	SC_R_HDMI = 407,
+	SC_R_HDMI_I2S = 408,
+	SC_R_HDMI_I2C_0 = 409,
+	SC_R_HDMI_PLL_0 = 410,
+	SC_R_HDMI_RX = 411,
+	SC_R_HDMI_RX_BYPASS = 412,
+	SC_R_HDMI_RX_I2C_0 = 413,
+	SC_R_ASRC_0 = 414,
+	SC_R_ESAI_0 = 415,
+	SC_R_SPDIF_0 = 416,
+	SC_R_SPDIF_1 = 417,
+	SC_R_SAI_3 = 418,
+	SC_R_SAI_4 = 419,
+	SC_R_SAI_5 = 420,
+	SC_R_GPT_5 = 421,
+	SC_R_GPT_6 = 422,
+	SC_R_GPT_7 = 423,
+	SC_R_GPT_8 = 424,
+	SC_R_GPT_9 = 425,
+	SC_R_GPT_10 = 426,
+	SC_R_DMA_2_CH5 = 427,
+	SC_R_DMA_2_CH6 = 428,
+	SC_R_DMA_2_CH7 = 429,
+	SC_R_DMA_2_CH8 = 430,
+	SC_R_DMA_2_CH9 = 431,
+	SC_R_DMA_2_CH10 = 432,
+	SC_R_DMA_2_CH11 = 433,
+	SC_R_DMA_2_CH12 = 434,
+	SC_R_DMA_2_CH13 = 435,
+	SC_R_DMA_2_CH14 = 436,
+	SC_R_DMA_2_CH15 = 437,
+	SC_R_DMA_2_CH16 = 438,
+	SC_R_DMA_2_CH17 = 439,
+	SC_R_DMA_2_CH18 = 440,
+	SC_R_DMA_2_CH19 = 441,
+	SC_R_DMA_2_CH20 = 442,
+	SC_R_DMA_2_CH21 = 443,
+	SC_R_DMA_2_CH22 = 444,
+	SC_R_DMA_2_CH23 = 445,
+	SC_R_DMA_2_CH24 = 446,
+	SC_R_DMA_2_CH25 = 447,
+	SC_R_DMA_2_CH26 = 448,
+	SC_R_DMA_2_CH27 = 449,
+	SC_R_DMA_2_CH28 = 450,
+	SC_R_DMA_2_CH29 = 451,
+	SC_R_DMA_2_CH30 = 452,
+	SC_R_DMA_2_CH31 = 453,
+	SC_R_ASRC_1 = 454,
+	SC_R_ESAI_1 = 455,
+	SC_R_SAI_6 = 456,
+	SC_R_SAI_7 = 457,
+	SC_R_AMIX = 458,
+	SC_R_MQS_0 = 459,
+	SC_R_DMA_3_CH0 = 460,
+	SC_R_DMA_3_CH1 = 461,
+	SC_R_DMA_3_CH2 = 462,
+	SC_R_DMA_3_CH3 = 463,
+	SC_R_DMA_3_CH4 = 464,
+	SC_R_DMA_3_CH5 = 465,
+	SC_R_DMA_3_CH6 = 466,
+	SC_R_DMA_3_CH7 = 467,
+	SC_R_DMA_3_CH8 = 468,
+	SC_R_DMA_3_CH9 = 469,
+	SC_R_DMA_3_CH10 = 470,
+	SC_R_DMA_3_CH11 = 471,
+	SC_R_DMA_3_CH12 = 472,
+	SC_R_DMA_3_CH13 = 473,
+	SC_R_DMA_3_CH14 = 474,
+	SC_R_DMA_3_CH15 = 475,
+	SC_R_DMA_3_CH16 = 476,
+	SC_R_DMA_3_CH17 = 477,
+	SC_R_DMA_3_CH18 = 478,
+	SC_R_DMA_3_CH19 = 479,
+	SC_R_DMA_3_CH20 = 480,
+	SC_R_DMA_3_CH21 = 481,
+	SC_R_DMA_3_CH22 = 482,
+	SC_R_DMA_3_CH23 = 483,
+	SC_R_DMA_3_CH24 = 484,
+	SC_R_DMA_3_CH25 = 485,
+	SC_R_DMA_3_CH26 = 486,
+	SC_R_DMA_3_CH27 = 487,
+	SC_R_DMA_3_CH28 = 488,
+	SC_R_DMA_3_CH29 = 489,
+	SC_R_DMA_3_CH30 = 490,
+	SC_R_DMA_3_CH31 = 491,
+	SC_R_AUDIO_PLL_1 = 492,
+	SC_R_AUDIO_CLK_0 = 493,
+	SC_R_AUDIO_CLK_1 = 494,
+	SC_R_MCLK_OUT_0 = 495,
+	SC_R_MCLK_OUT_1 = 496,
+	SC_R_PMIC_0 = 497,
+	SC_R_PMIC_1 = 498,
+	SC_R_SECO = 499,
+	SC_R_CAAM_JR1 = 500,
+	SC_R_CAAM_JR2 = 501,
+	SC_R_CAAM_JR3 = 502,
+	SC_R_SECO_MU_2 = 503,
+	SC_R_SECO_MU_3 = 504,
+	SC_R_SECO_MU_4 = 505,
+	SC_R_HDMI_RX_PWM_0 = 506,
+	SC_R_A35 = 507,
+	SC_R_A35_0 = 508,
+	SC_R_A35_1 = 509,
+	SC_R_A35_2 = 510,
+	SC_R_A35_3 = 511,
+	SC_R_DSP = 512,
+	SC_R_DSP_RAM = 513,
+	SC_R_CAAM_JR1_OUT = 514,
+	SC_R_CAAM_JR2_OUT = 515,
+	SC_R_CAAM_JR3_OUT = 516,
+	SC_R_VPU_DEC_0 = 517,
+	SC_R_VPU_ENC_0 = 518,
+	SC_R_CAAM_JR0 = 519,
+	SC_R_CAAM_JR0_OUT = 520,
+	SC_R_PMIC_2 = 521,
+	SC_R_DBLOGIC = 522,
+	SC_R_HDMI_PLL_1 = 523,
+	SC_R_BOARD_R0 = 524,
+	SC_R_BOARD_R1 = 525,
+	SC_R_BOARD_R2 = 526,
+	SC_R_BOARD_R3 = 527,
+	SC_R_BOARD_R4 = 528,
+	SC_R_BOARD_R5 = 529,
+	SC_R_BOARD_R6 = 530,
+	SC_R_BOARD_R7 = 531,
+	SC_R_MJPEG_DEC_MP = 532,
+	SC_R_MJPEG_ENC_MP = 533,
+	SC_R_VPU_TS_0 = 534,
+	SC_R_VPU_MU_0 = 535,
+	SC_R_VPU_MU_1 = 536,
+	SC_R_VPU_MU_2 = 537,
+	SC_R_VPU_MU_3 = 538,
+	SC_R_VPU_ENC_1 = 539,
+	SC_R_VPU = 540,
+	SC_R_LAST
+} sc_rsrc_t;
+
+/* NOTE - please add by replacing some of the UNUSED from above! */
+
+/*
+ * This type is used to indicate a control.
+ */
+typedef enum sc_ctrl_e {
+	SC_C_TEMP = 0,
+	SC_C_TEMP_HI = 1,
+	SC_C_TEMP_LOW = 2,
+	SC_C_PXL_LINK_MST1_ADDR = 3,
+	SC_C_PXL_LINK_MST2_ADDR = 4,
+	SC_C_PXL_LINK_MST_ENB = 5,
+	SC_C_PXL_LINK_MST1_ENB = 6,
+	SC_C_PXL_LINK_MST2_ENB = 7,
+	SC_C_PXL_LINK_SLV1_ADDR = 8,
+	SC_C_PXL_LINK_SLV2_ADDR = 9,
+	SC_C_PXL_LINK_MST_VLD = 10,
+	SC_C_PXL_LINK_MST1_VLD = 11,
+	SC_C_PXL_LINK_MST2_VLD = 12,
+	SC_C_SINGLE_MODE = 13,
+	SC_C_ID = 14,
+	SC_C_PXL_CLK_POLARITY = 15,
+	SC_C_LINESTATE = 16,
+	SC_C_PCIE_G_RST = 17,
+	SC_C_PCIE_BUTTON_RST = 18,
+	SC_C_PCIE_PERST = 19,
+	SC_C_PHY_RESET = 20,
+	SC_C_PXL_LINK_RATE_CORRECTION = 21,
+	SC_C_PANIC = 22,
+	SC_C_PRIORITY_GROUP = 23,
+	SC_C_TXCLK = 24,
+	SC_C_CLKDIV = 25,
+	SC_C_DISABLE_50 = 26,
+	SC_C_DISABLE_125 = 27,
+	SC_C_SEL_125 = 28,
+	SC_C_MODE = 29,
+	SC_C_SYNC_CTRL0 = 30,
+	SC_C_KACHUNK_CNT = 31,
+	SC_C_KACHUNK_SEL = 32,
+	SC_C_SYNC_CTRL1 = 33,
+	SC_C_DPI_RESET = 34,
+	SC_C_MIPI_RESET = 35,
+	SC_C_DUAL_MODE = 36,
+	SC_C_VOLTAGE = 37,
+	SC_C_PXL_LINK_SEL = 38,
+	SC_C_OFS_SEL = 39,
+	SC_C_OFS_AUDIO = 40,
+	SC_C_OFS_PERIPH = 41,
+	SC_C_OFS_IRQ = 42,
+	SC_C_RST0 = 43,
+	SC_C_RST1 = 44,
+	SC_C_SEL0 = 45,
+	SC_C_LAST
+} sc_ctrl_t;
+
+#endif /* _SC_TYPES_H */
-- 
2.7.4

  parent reply	other threads:[~2018-08-20 16:08 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-20 16:08 [PATCH V5 0/5] soc: imx: add scu firmware api support Dong Aisheng
2018-08-20 16:08 ` [PATCH V5 1/5] dt-bindings: arm: fsl: add scu binding doc Dong Aisheng
2018-08-20 16:08   ` Dong Aisheng
2018-08-20 16:08   ` Dong Aisheng
2018-08-20 18:11   ` Rob Herring
2018-08-20 18:11     ` Rob Herring
2018-08-20 18:11     ` Rob Herring
2018-08-21  3:00     ` A.s. Dong
2018-08-21  3:00       ` A.s. Dong
2018-08-21  3:00       ` A.s. Dong
2018-08-21 11:51       ` A.s. Dong
2018-08-21 11:51         ` A.s. Dong
2018-08-21 11:51         ` A.s. Dong
2018-08-24  9:36       ` Jassi Brar
2018-08-24  9:36         ` Jassi Brar
2018-08-24  9:36         ` Jassi Brar
2018-08-24  9:51         ` A.s. Dong
2018-08-24  9:51           ` A.s. Dong
2018-08-24  9:51           ` A.s. Dong
2018-08-20 16:08 ` Dong Aisheng [this message]
2018-09-10  8:40   ` [PATCH V5 2/5] soc: imx: add SC firmware IPC and APIs Sascha Hauer
2018-09-10  9:44     ` A.s. Dong
2018-09-10 12:11       ` Sascha Hauer
2018-09-11 10:38         ` A.s. Dong
2018-09-16 13:23           ` A.s. Dong
2018-09-18  6:22           ` Sascha Hauer
2018-09-18  7:54             ` A.s. Dong
2018-08-20 16:08 ` [PATCH V5 3/5] soc: imx: sc: add pm svc support Dong Aisheng
2018-08-20 16:08 ` [PATCH V5 4/5] soc: imx: sc: add pad " Dong Aisheng
2018-08-20 16:08 ` [PATCH V5 5/5] soc: imx: sc: add misc " Dong Aisheng
2018-08-20 16:31 ` [PATCH V5 0/5] soc: imx: add scu firmware api support A.s. Dong
2018-08-24  7:36   ` A.s. Dong
2018-08-24  9:54     ` Jassi Brar
2018-08-24 11:02       ` A.s. Dong
2018-08-27  8:33     ` Sascha Hauer
2018-08-27  9:59       ` A.s. Dong
2018-08-27 10:21         ` A.s. Dong
2018-08-28  6:21           ` Sascha Hauer
2018-08-28  8:53             ` A.s. Dong
2018-08-29  6:53               ` Sascha Hauer
2018-08-29  8:35                 ` A.s. Dong
2018-09-03  8:57                   ` A.s. Dong
2018-09-03 11:44                     ` Sascha Hauer
2018-09-06  3:21                       ` A.s. Dong
2018-09-10  7:03                         ` Sascha Hauer
2018-09-10  7:53                           ` A.s. Dong
2018-08-28  6:15         ` Sascha Hauer
2018-08-28  9:02           ` A.s. Dong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1534781305-4770-3-git-send-email-aisheng.dong@nxp.com \
    --to=aisheng.dong@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.