From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Robert Kern <ulteq@web.de>
Subject: [PATCH v3 1/2] hwmon: (nct6775) Fix virtual temperature sources for NCT6796D
Date: Sat, 15 Sep 2018 16:30:42 -0700 [thread overview]
Message-ID: <1537054243-26154-1-git-send-email-linux@roeck-us.net> (raw)
The following kernel log message is reported for the nct6775 driver
on ASUS WS X299 SAGE.
nct6775: Found NCT6796D or compatible chip at 0x2e:0x290
nct6775 nct6775.656: Invalid temperature source 11 at index 0,
source register 0x100, temp register 0x73
nct6775 nct6775.656: Invalid temperature source 11 at index 2,
source register 0x300, temp register 0x77
nct6775 nct6775.656: Invalid temperature source 11 at index 3,
source register 0x800, temp register 0x79
nct6775 nct6775.656: Invalid temperature source 11 at index 4,
source register 0x900, temp register 0x7b
A recent version of the datasheet lists temperature source 11 as reserved.
However, an older version of the datasheet lists temperature sources 10
and 11 as supported virtual temperature sources. Apparently the older
version of the datasheet is correct, so list those temperature sources
as supported.
Virtual temperature sources are different than other temperature sources:
Values are not read from a temperature sensor, but written either from
BIOS or an embedded controller. As such, each virtual temperature has to
be reported. Since there is now more than one temperature source, we have
to keep virtual temperature sources in a chip-specific mask and can no
longer rely on the assumption that there is only one virtual temperature
source with a fixed index. This accounts for most of the complexity of this
patch.
Reported-by: Robert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3: Handle multiple virtual interrupt sources correctly
v2: No change
drivers/hwmon/nct6775.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 87c316c6c341..202a2b422461 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -207,8 +207,6 @@ superio_exit(int ioreg)
#define NUM_FAN 7
-#define TEMP_SOURCE_VIRTUAL 0x1f
-
/* Common and NCT6775 specific data */
/* Voltage min/max registers for nr=7..14 are in bank 5 */
@@ -374,6 +372,7 @@ static const char *const nct6775_temp_label[] = {
};
#define NCT6775_TEMP_MASK 0x001ffffe
+#define NCT6775_VIRT_TEMP_MASK 0x00000000
static const u16 NCT6775_REG_TEMP_ALTERNATE[32] = {
[13] = 0x661,
@@ -462,6 +461,7 @@ static const char *const nct6776_temp_label[] = {
};
#define NCT6776_TEMP_MASK 0x007ffffe
+#define NCT6776_VIRT_TEMP_MASK 0x00000000
static const u16 NCT6776_REG_TEMP_ALTERNATE[32] = {
[14] = 0x401,
@@ -560,7 +560,9 @@ static const char *const nct6779_temp_label[] = {
};
#define NCT6779_TEMP_MASK 0x07ffff7e
+#define NCT6779_VIRT_TEMP_MASK 0x00000000
#define NCT6791_TEMP_MASK 0x87ffff7e
+#define NCT6791_VIRT_TEMP_MASK 0x80000000
static const u16 NCT6779_REG_TEMP_ALTERNATE[32]
= { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0,
@@ -639,6 +641,7 @@ static const char *const nct6792_temp_label[] = {
};
#define NCT6792_TEMP_MASK 0x9fffff7e
+#define NCT6792_VIRT_TEMP_MASK 0x80000000
static const char *const nct6793_temp_label[] = {
"",
@@ -676,6 +679,7 @@ static const char *const nct6793_temp_label[] = {
};
#define NCT6793_TEMP_MASK 0xbfff037e
+#define NCT6793_VIRT_TEMP_MASK 0x80000000
static const char *const nct6795_temp_label[] = {
"",
@@ -713,6 +717,7 @@ static const char *const nct6795_temp_label[] = {
};
#define NCT6795_TEMP_MASK 0xbfffff7e
+#define NCT6795_VIRT_TEMP_MASK 0x80000000
static const char *const nct6796_temp_label[] = {
"",
@@ -725,8 +730,8 @@ static const char *const nct6796_temp_label[] = {
"AUXTIN4",
"SMBUSMASTER 0",
"SMBUSMASTER 1",
- "",
- "",
+ "Virtual_TEMP",
+ "Virtual_TEMP",
"",
"",
"",
@@ -749,7 +754,8 @@ static const char *const nct6796_temp_label[] = {
"Virtual_TEMP"
};
-#define NCT6796_TEMP_MASK 0xbfff03fe
+#define NCT6796_TEMP_MASK 0xbfff0ffe
+#define NCT6796_VIRT_TEMP_MASK 0x80000c00
/* NCT6102D/NCT6106D specific data */
@@ -970,6 +976,7 @@ struct nct6775_data {
u16 reg_temp_config[NUM_TEMP];
const char * const *temp_label;
u32 temp_mask;
+ u32 virt_temp_mask;
u16 REG_CONFIG;
u16 REG_VBAT;
@@ -3644,6 +3651,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->temp_label = nct6776_temp_label;
data->temp_mask = NCT6776_TEMP_MASK;
+ data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
data->REG_VBAT = NCT6106_REG_VBAT;
data->REG_DIODE = NCT6106_REG_DIODE;
@@ -3722,6 +3730,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->temp_label = nct6775_temp_label;
data->temp_mask = NCT6775_TEMP_MASK;
+ data->virt_temp_mask = NCT6775_VIRT_TEMP_MASK;
data->REG_CONFIG = NCT6775_REG_CONFIG;
data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3794,6 +3803,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->temp_label = nct6776_temp_label;
data->temp_mask = NCT6776_TEMP_MASK;
+ data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
data->REG_CONFIG = NCT6775_REG_CONFIG;
data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3866,6 +3876,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->temp_label = nct6779_temp_label;
data->temp_mask = NCT6779_TEMP_MASK;
+ data->virt_temp_mask = NCT6779_VIRT_TEMP_MASK;
data->REG_CONFIG = NCT6775_REG_CONFIG;
data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3949,22 +3960,27 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6791:
data->temp_label = nct6779_temp_label;
data->temp_mask = NCT6791_TEMP_MASK;
+ data->virt_temp_mask = NCT6791_VIRT_TEMP_MASK;
break;
case nct6792:
data->temp_label = nct6792_temp_label;
data->temp_mask = NCT6792_TEMP_MASK;
+ data->virt_temp_mask = NCT6792_VIRT_TEMP_MASK;
break;
case nct6793:
data->temp_label = nct6793_temp_label;
data->temp_mask = NCT6793_TEMP_MASK;
+ data->virt_temp_mask = NCT6793_VIRT_TEMP_MASK;
break;
case nct6795:
data->temp_label = nct6795_temp_label;
data->temp_mask = NCT6795_TEMP_MASK;
+ data->virt_temp_mask = NCT6795_VIRT_TEMP_MASK;
break;
case nct6796:
data->temp_label = nct6796_temp_label;
data->temp_mask = NCT6796_TEMP_MASK;
+ data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK;
break;
}
@@ -4148,7 +4164,7 @@ static int nct6775_probe(struct platform_device *pdev)
* for each fan reflects a different temperature, and there
* are no duplicates.
*/
- if (src != TEMP_SOURCE_VIRTUAL) {
+ if (!(data->virt_temp_mask & BIT(src))) {
if (mask & BIT(src))
continue;
mask |= BIT(src);
--
2.7.4
next reply other threads:[~2018-09-15 23:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-15 23:30 Guenter Roeck [this message]
2018-09-15 23:30 ` [PATCH v3 2/2] hwmon: (nct6775) Fix RPM output for fan7 on NCT6796D Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537054243-26154-1-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=ulteq@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.