From: Connor McAdams <conmanx360@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: conmanx360@gmail.com, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, Takashi Sakamoto <o-takashi@sakamocchi.jp>, Alastair Bridgewater <alastair.bridgewater@gmail.com>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [PATCH 07/11] ALSA: hda/ca0132 - Add ZxR DSP post-download commands Date: Sat, 29 Sep 2018 23:03:22 -0400 [thread overview] Message-ID: <1538276607-30234-8-git-send-email-conmanx360@gmail.com> (raw) In-Reply-To: <1538276607-30234-1-git-send-email-conmanx360@gmail.com> This patch adds commands for setting up the ZxR after the DSP is downloaded. The ZxR already shares most of the post-download commands from the regular Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> --- sound/pci/hda/patch_ca0132.c | 37 ++++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 6e48c3d..729766a 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -6854,19 +6854,29 @@ static void sbz_chipio_startup_data(struct hda_codec *codec) chipio_set_stream_channels(codec, 0x0C, 6); chipio_set_stream_control(codec, 0x0C, 1); /* No clue what these control */ - chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); - chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); - chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); - chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); - chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); - chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); - chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); - chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); - chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); - chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); - chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); - chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); - + if (spec->quirk == QUIRK_SBZ) { + chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); + chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); + chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); + chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); + chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); + chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); + chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); + chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); + chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); + chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); + chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); + chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); + } else if (spec->quirk == QUIRK_ZXR) { + chipio_write_no_mutex(codec, 0x190038, 0x000140c2); + chipio_write_no_mutex(codec, 0x19003c, 0x000141c3); + chipio_write_no_mutex(codec, 0x190040, 0x000150c4); + chipio_write_no_mutex(codec, 0x190044, 0x000151c5); + chipio_write_no_mutex(codec, 0x190050, 0x000142c8); + chipio_write_no_mutex(codec, 0x190054, 0x000143c9); + chipio_write_no_mutex(codec, 0x190058, 0x000152ca); + chipio_write_no_mutex(codec, 0x19005c, 0x000153cb); + } chipio_write_no_mutex(codec, 0x19042c, 0x00000001); codec_dbg(codec, "Startup Data exited, mutex released.\n"); @@ -8161,6 +8171,7 @@ static int ca0132_init(struct hda_codec *codec) r3d_setup_defaults(codec); break; case QUIRK_SBZ: + case QUIRK_ZXR: sbz_setup_defaults(codec); break; case QUIRK_AE5: -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Connor McAdams <conmanx360@gmail.com> Cc: conmanx360@gmail.com, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, Takashi Sakamoto <o-takashi@sakamocchi.jp>, Alastair Bridgewater <alastair.bridgewater@gmail.com>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [PATCH 07/11] ALSA: hda/ca0132 - Add ZxR DSP post-download commands Date: Sat, 29 Sep 2018 23:03:22 -0400 [thread overview] Message-ID: <1538276607-30234-8-git-send-email-conmanx360@gmail.com> (raw) In-Reply-To: <1538276607-30234-1-git-send-email-conmanx360@gmail.com> This patch adds commands for setting up the ZxR after the DSP is downloaded. The ZxR already shares most of the post-download commands from the regular Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> --- sound/pci/hda/patch_ca0132.c | 37 ++++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 6e48c3d..729766a 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -6854,19 +6854,29 @@ static void sbz_chipio_startup_data(struct hda_codec *codec) chipio_set_stream_channels(codec, 0x0C, 6); chipio_set_stream_control(codec, 0x0C, 1); /* No clue what these control */ - chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); - chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); - chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); - chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); - chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); - chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); - chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); - chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); - chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); - chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); - chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); - chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); - + if (spec->quirk == QUIRK_SBZ) { + chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); + chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); + chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); + chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); + chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); + chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); + chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); + chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); + chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); + chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); + chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); + chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); + } else if (spec->quirk == QUIRK_ZXR) { + chipio_write_no_mutex(codec, 0x190038, 0x000140c2); + chipio_write_no_mutex(codec, 0x19003c, 0x000141c3); + chipio_write_no_mutex(codec, 0x190040, 0x000150c4); + chipio_write_no_mutex(codec, 0x190044, 0x000151c5); + chipio_write_no_mutex(codec, 0x190050, 0x000142c8); + chipio_write_no_mutex(codec, 0x190054, 0x000143c9); + chipio_write_no_mutex(codec, 0x190058, 0x000152ca); + chipio_write_no_mutex(codec, 0x19005c, 0x000153cb); + } chipio_write_no_mutex(codec, 0x19042c, 0x00000001); codec_dbg(codec, "Startup Data exited, mutex released.\n"); @@ -8161,6 +8171,7 @@ static int ca0132_init(struct hda_codec *codec) r3d_setup_defaults(codec); break; case QUIRK_SBZ: + case QUIRK_ZXR: sbz_setup_defaults(codec); break; case QUIRK_AE5: -- 2.7.4
next prev parent reply other threads:[~2018-09-30 3:04 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-30 3:03 [PATCH 00/11] Add ZxR support + bugfixes Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 01/11] ALSA: hda/ca0132 - Fix AE-5 control type Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 02/11] ALSA: hda/ca0132 - Fix surround sound with output effects Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 03/11] ALSA: hda/ca0132 - Add ZxR quirks + new quirk check function Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 04/11] ALSA: hda/ca0132 - Add ZxR pincfg Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 05/11] ALSA: hda/ca0132 - Add DBpro hda_codec_ops Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-10-01 2:10 ` Takashi Sakamoto 2018-09-30 3:03 ` [PATCH 06/11] ALSA: hda/ca0132 - Add ZxR init commands Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` Connor McAdams [this message] 2018-09-30 3:03 ` [PATCH 07/11] ALSA: hda/ca0132 - Add ZxR DSP post-download commands Connor McAdams 2018-09-30 3:03 ` [PATCH 08/11] ALSA: hda/ca0132 - Add ZxR input/output select commands Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 09/11] ALSA: hda/ca0132 - Remove input select enum for ZxR Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-09-30 3:03 ` [PATCH 10/11] ALSA: hda/ca0132 - Add ZxR 600 ohm gain control Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-10-01 2:22 ` Takashi Sakamoto 2018-10-01 2:22 ` Takashi Sakamoto 2018-09-30 3:03 ` [PATCH 11/11] ALSA: hda/ca0132 - Add ZxR exit commands Connor McAdams 2018-09-30 3:03 ` Connor McAdams 2018-10-01 14:03 ` [PATCH 00/11] Add ZxR support + bugfixes Takashi Sakamoto 2018-10-02 15:23 ` Takashi Iwai 2018-10-02 15:23 ` Takashi Iwai 2018-10-07 17:05 ` Connor McAdams 2018-10-08 15:10 ` Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1538276607-30234-8-git-send-email-conmanx360@gmail.com \ --to=conmanx360@gmail.com \ --cc=alastair.bridgewater@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=linux-kernel@vger.kernel.org \ --cc=o-takashi@sakamocchi.jp \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.