All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: horms@verge.net.au, magnus.damm@gmail.com
Cc: linux-renesas-soc@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3
Date: Tue,  9 Oct 2018 19:45:11 +0900	[thread overview]
Message-ID: <1539081911-9020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)

This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards.
So, the default mode on each board is:
 - R-Car D3 Draak board (has a type-A connector) = host.
 - R-Car E3 Ebisu board (has a type-B micro connector) = peripheral.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts |  8 +++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi      | 45 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts |  8 +++++
 arch/arm64/boot/dts/renesas/r8a77995.dtsi      | 45 ++++++++++++++++++++++++++
 4 files changed, 106 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index f342dd8..f85655d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -188,6 +188,7 @@
 };
 
 &ehci0 {
+	dr_mode = "peripheral";
 	status = "okay";
 };
 
@@ -195,6 +196,11 @@
 	clock-frequency = <48000000>;
 };
 
+&hsusb {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -295,6 +301,7 @@
 };
 
 &ohci0 {
+	dr_mode = "peripheral";
 	status = "okay";
 };
 
@@ -359,6 +366,7 @@
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 
+	renesas,no-otg-pins;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 7278cd5..e3726307 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -357,6 +357,51 @@
 			resets = <&cpg 407>;
 		};
 
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77990",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 2405eaa..48bb1d7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -179,6 +179,7 @@
 };
 
 &ehci0 {
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -186,6 +187,11 @@
 	clock-frequency = <48000000>;
 };
 
+&hsusb {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -337,6 +343,7 @@
 };
 
 &ohci0 {
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -445,6 +452,7 @@
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 
+	renesas,no-otg-pins;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 214f495..186f477 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -344,6 +344,51 @@
 			status = "disabled";
 		};
 
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77995",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		canfd: can@e66c0000 {
 			compatible = "renesas,r8a77995-canfd",
 				     "renesas,rcar-gen3-canfd";
-- 
1.9.1

             reply	other threads:[~2018-10-09 18:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 10:45 Yoshihiro Shimoda [this message]
     [not found] ` <TYAPR01MB228597FF192B13D50AE16FC7B7E20@TYAPR01MB2285.jpnprd01.prod.outlook.com>
2018-10-12  8:32   ` [PATCH] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3 Biju Das
2018-10-16  2:04     ` Yoshihiro Shimoda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539081911-9020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=horms@verge.net.au \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.