From: Anilkumar Kolli <akolli@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Anilkumar Kolli <akolli@codeaurora.org> Subject: [PATCH 2/2] ath10k: report tx rate using ieee80211_tx_rate_update() Date: Thu, 11 Oct 2018 18:15:04 +0530 [thread overview] Message-ID: <1539261904-9016-3-git-send-email-akolli@codeaurora.org> (raw) In-Reply-To: <1539261904-9016-1-git-send-email-akolli@codeaurora.org> Mesh path metric needs tx rate information from ieee80211_tx_status() call but in ath10k there is no mechanism to report tx rate information via ieee80211_tx_status(), the tx rate is only accessible via sta_statiscs() op. Per peer tx stats has tx rate info available, Tx rate is available to ath10k driver after every 4 PPDU sent in the air. For each PPDU, ath10k driver updates rate informattion to mac80211 using ieee80211_tx_rate_update(). Per peer txrate information is updated through per peer statistics and is available for QCA9888/QCA9984/QCA4019/QCA998X only Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053 Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/htt_rx.c | 70 +++++++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 3 files changed, 66 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 491eb0d2fc5f..cd4ed5cab630 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -494,6 +494,7 @@ struct ath10k_sta { u32 smps; u16 peer_id; struct rate_info txrate; + struct ieee80211_tx_info tx_info; struct work_struct update_wk; u64 rx_duration; diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index b862d5de5e2f..2c871ecd6afc 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2627,7 +2627,7 @@ void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) dev_kfree_skb_any(skb); } -static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) +static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) { static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54}; @@ -2646,7 +2646,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) ath10k_accumulate_per_peer_tx_stats(struct ath10k *ar, struct ath10k_sta *arsta, struct ath10k_per_peer_tx_stats *pstats, - u8 legacy_rate_idx) + s8 legacy_rate_idx) { struct rate_info *txrate = &arsta->txrate; struct ath10k_htt_tx_stats *tx_stats; @@ -2768,8 +2768,11 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) struct ath10k_per_peer_tx_stats *peer_stats) { struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; - u8 rate = 0, rate_idx = 0, sgi; + struct ieee80211_chanctx_conf *conf = NULL; struct rate_info txrate; + u8 rate = 0, sgi; + s8 rate_idx = 0; + bool skip_auto_rate; lockdep_assert_held(&ar->data_lock); @@ -2778,6 +2781,13 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode); txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode); sgi = ATH10K_HW_GI(peer_stats->flags); + skip_auto_rate = ATH10K_FW_SKIPPED_RATE_CTRL(peer_stats->flags); + + /* Firmware's rate control skips broadcast/management frames, + * if host has configure fixed rates and in some other special cases. + */ + if (skip_auto_rate) + return; if (txrate.flags == WMI_RATE_PREAMBLE_VHT && txrate.mcs > 9) { ath10k_warn(ar, "Invalid VHT mcs %hhd peer stats", txrate.mcs); @@ -2792,7 +2802,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) } memset(&arsta->txrate, 0, sizeof(arsta->txrate)); - + memset(&arsta->tx_info.status, 0, sizeof(arsta->tx_info.status)); if (txrate.flags == WMI_RATE_PREAMBLE_CCK || txrate.flags == WMI_RATE_PREAMBLE_OFDM) { rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode); @@ -2811,11 +2821,59 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) arsta->txrate.mcs = txrate.mcs; } - if (sgi) - arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + switch (txrate.flags) { + case WMI_RATE_PREAMBLE_OFDM: + if (arsta->arvif && arsta->arvif->vif) + conf = rcu_dereference(arsta->arvif->vif->chanctx_conf); + if (conf && conf->def.chan->band == NL80211_BAND_5GHZ) + arsta->tx_info.status.rates[0].idx = rate_idx - 4; + break; + case WMI_RATE_PREAMBLE_CCK: + arsta->tx_info.status.rates[0].idx = rate_idx; + if (sgi) + arsta->tx_info.status.rates[0].flags |= + (IEEE80211_TX_RC_USE_SHORT_PREAMBLE | + IEEE80211_TX_RC_SHORT_GI); + break; + case WMI_RATE_PREAMBLE_HT: + arsta->tx_info.status.rates[0].idx = + txrate.mcs + ((txrate.nss - 1) * 8); + if (sgi) + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_SHORT_GI; + arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_MCS; + break; + case WMI_RATE_PREAMBLE_VHT: + ieee80211_rate_set_vht(&arsta->tx_info.status.rates[0], + txrate.mcs, txrate.nss); + if (sgi) + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_SHORT_GI; + arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_VHT_MCS; + break; + } arsta->txrate.nss = txrate.nss; arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw); + if (sgi) + arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + + switch (arsta->txrate.bw) { + case RATE_INFO_BW_40: + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_40_MHZ_WIDTH; + break; + case RATE_INFO_BW_80: + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_80_MHZ_WIDTH; + break; + } + + if (peer_stats->succ_pkts) { + arsta->tx_info.flags = IEEE80211_TX_STAT_ACK; + arsta->tx_info.status.rates[0].count = 1; + ieee80211_tx_rate_update(ar->hw, sta, &arsta->tx_info); + } if (ath10k_debug_is_extd_tx_stats_enabled(ar)) ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats, diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 300f20523204..ef41a0b827f2 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4984,6 +4984,7 @@ enum wmi_rate_preamble { (((preamble) << 6) | ((nss) << 4) | (rate)) #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) +#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) #define ATH10K_VHT_MCS_NUM 10 #define ATH10K_BW_NUM 4 -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Anilkumar Kolli <akolli@codeaurora.org> To: ath10k@lists.infradead.org Cc: Anilkumar Kolli <akolli@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH 2/2] ath10k: report tx rate using ieee80211_tx_rate_update() Date: Thu, 11 Oct 2018 18:15:04 +0530 [thread overview] Message-ID: <1539261904-9016-3-git-send-email-akolli@codeaurora.org> (raw) In-Reply-To: <1539261904-9016-1-git-send-email-akolli@codeaurora.org> Mesh path metric needs tx rate information from ieee80211_tx_status() call but in ath10k there is no mechanism to report tx rate information via ieee80211_tx_status(), the tx rate is only accessible via sta_statiscs() op. Per peer tx stats has tx rate info available, Tx rate is available to ath10k driver after every 4 PPDU sent in the air. For each PPDU, ath10k driver updates rate informattion to mac80211 using ieee80211_tx_rate_update(). Per peer txrate information is updated through per peer statistics and is available for QCA9888/QCA9984/QCA4019/QCA998X only Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053 Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/htt_rx.c | 70 +++++++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 3 files changed, 66 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 491eb0d2fc5f..cd4ed5cab630 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -494,6 +494,7 @@ struct ath10k_sta { u32 smps; u16 peer_id; struct rate_info txrate; + struct ieee80211_tx_info tx_info; struct work_struct update_wk; u64 rx_duration; diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index b862d5de5e2f..2c871ecd6afc 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2627,7 +2627,7 @@ void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) dev_kfree_skb_any(skb); } -static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) +static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) { static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54}; @@ -2646,7 +2646,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) ath10k_accumulate_per_peer_tx_stats(struct ath10k *ar, struct ath10k_sta *arsta, struct ath10k_per_peer_tx_stats *pstats, - u8 legacy_rate_idx) + s8 legacy_rate_idx) { struct rate_info *txrate = &arsta->txrate; struct ath10k_htt_tx_stats *tx_stats; @@ -2768,8 +2768,11 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) struct ath10k_per_peer_tx_stats *peer_stats) { struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; - u8 rate = 0, rate_idx = 0, sgi; + struct ieee80211_chanctx_conf *conf = NULL; struct rate_info txrate; + u8 rate = 0, sgi; + s8 rate_idx = 0; + bool skip_auto_rate; lockdep_assert_held(&ar->data_lock); @@ -2778,6 +2781,13 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode); txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode); sgi = ATH10K_HW_GI(peer_stats->flags); + skip_auto_rate = ATH10K_FW_SKIPPED_RATE_CTRL(peer_stats->flags); + + /* Firmware's rate control skips broadcast/management frames, + * if host has configure fixed rates and in some other special cases. + */ + if (skip_auto_rate) + return; if (txrate.flags == WMI_RATE_PREAMBLE_VHT && txrate.mcs > 9) { ath10k_warn(ar, "Invalid VHT mcs %hhd peer stats", txrate.mcs); @@ -2792,7 +2802,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) } memset(&arsta->txrate, 0, sizeof(arsta->txrate)); - + memset(&arsta->tx_info.status, 0, sizeof(arsta->tx_info.status)); if (txrate.flags == WMI_RATE_PREAMBLE_CCK || txrate.flags == WMI_RATE_PREAMBLE_OFDM) { rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode); @@ -2811,11 +2821,59 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate) arsta->txrate.mcs = txrate.mcs; } - if (sgi) - arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + switch (txrate.flags) { + case WMI_RATE_PREAMBLE_OFDM: + if (arsta->arvif && arsta->arvif->vif) + conf = rcu_dereference(arsta->arvif->vif->chanctx_conf); + if (conf && conf->def.chan->band == NL80211_BAND_5GHZ) + arsta->tx_info.status.rates[0].idx = rate_idx - 4; + break; + case WMI_RATE_PREAMBLE_CCK: + arsta->tx_info.status.rates[0].idx = rate_idx; + if (sgi) + arsta->tx_info.status.rates[0].flags |= + (IEEE80211_TX_RC_USE_SHORT_PREAMBLE | + IEEE80211_TX_RC_SHORT_GI); + break; + case WMI_RATE_PREAMBLE_HT: + arsta->tx_info.status.rates[0].idx = + txrate.mcs + ((txrate.nss - 1) * 8); + if (sgi) + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_SHORT_GI; + arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_MCS; + break; + case WMI_RATE_PREAMBLE_VHT: + ieee80211_rate_set_vht(&arsta->tx_info.status.rates[0], + txrate.mcs, txrate.nss); + if (sgi) + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_SHORT_GI; + arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_VHT_MCS; + break; + } arsta->txrate.nss = txrate.nss; arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw); + if (sgi) + arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + + switch (arsta->txrate.bw) { + case RATE_INFO_BW_40: + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_40_MHZ_WIDTH; + break; + case RATE_INFO_BW_80: + arsta->tx_info.status.rates[0].flags |= + IEEE80211_TX_RC_80_MHZ_WIDTH; + break; + } + + if (peer_stats->succ_pkts) { + arsta->tx_info.flags = IEEE80211_TX_STAT_ACK; + arsta->tx_info.status.rates[0].count = 1; + ieee80211_tx_rate_update(ar->hw, sta, &arsta->tx_info); + } if (ath10k_debug_is_extd_tx_stats_enabled(ar)) ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats, diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 300f20523204..ef41a0b827f2 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4984,6 +4984,7 @@ enum wmi_rate_preamble { (((preamble) << 6) | ((nss) << 4) | (rate)) #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) +#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) #define ATH10K_VHT_MCS_NUM 10 #define ATH10K_BW_NUM 4 -- 1.7.9.5 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2018-10-11 12:42 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-11 12:45 [PATCH 0/2] ath10k: Add support to update tx rate to mac80211 Anilkumar Kolli 2018-10-11 12:45 ` Anilkumar Kolli 2018-10-11 12:45 ` [PATCH 1/2] mac80211: implement ieee80211_tx_rate_update to update rate Anilkumar Kolli 2018-10-11 12:45 ` Anilkumar Kolli 2018-10-11 12:45 ` Anilkumar Kolli [this message] 2018-10-11 12:45 ` [PATCH 2/2] ath10k: report tx rate using ieee80211_tx_rate_update() Anilkumar Kolli 2018-10-12 11:35 ` Kalle Valo 2018-10-12 11:35 ` Kalle Valo [not found] ` <20181012113515.202BD6063F@smtp.codeaurora.org> 2018-10-26 12:58 ` Anilkumar Kolli 2018-10-26 12:58 ` Anilkumar Kolli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1539261904-9016-3-git-send-email-akolli@codeaurora.org \ --to=akolli@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.