From: Anilkumar Kolli <akolli@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Anilkumar Kolli <akolli@codeaurora.org> Subject: [PATCH 1/2] ath10k: Add memory dump support for QCA4019 Date: Fri, 12 Oct 2018 11:36:36 +0530 [thread overview] Message-ID: <1539324397-10597-1-git-send-email-akolli@codeaurora.org> (raw) This patch adds firmware crash memory dump support for QCA4019. Tested on: QCA4019 firmware 10.4-3.2.1.1-00017 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- drivers/net/wireless/ath/ath10k/coredump.c | 103 +++++++++++++++++++++++++++- 1 file changed, 102 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c index 4d28063052fe..1ccc73c6ef12 100644 --- a/drivers/net/wireless/ath/ath10k/coredump.c +++ b/drivers/net/wireless/ath/ath10k/coredump.c @@ -867,6 +867,101 @@ }, }; +static const struct ath10k_mem_section ipq4019_soc_reg_range[] = { + {0x080000, 0x080004}, + {0x080020, 0x080024}, + {0x080028, 0x080050}, + {0x0800d4, 0x0800ec}, + {0x08010c, 0x080118}, + {0x080284, 0x080290}, + {0x0802a8, 0x0802b8}, + {0x0802dc, 0x08030c}, + {0x082000, 0x083fff} +}; + +static const struct ath10k_mem_region qca4019_hw10_mem_regions[] = { + { + .type = ATH10K_MEM_REGION_TYPE_DRAM, + .start = 0x400000, + .len = 0x68000, + .name = "DRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0xC0000, + .len = 0x40000, + .name = "SRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0x98000, + .len = 0x50000, + .name = "IRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x30000, + .len = 0x7000, + .name = "APB REG 1", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x3f000, + .len = 0x3000, + .name = "APB REG 2", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x43000, + .len = 0x3000, + .name = "WIFI REG", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x4A000, + .len = 0x5000, + .name = "CE REG", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0x080000, + .len = 0x083fff - 0x080000, + .name = "REG_TOTAL", + .section_table = { + .sections = ipq4019_soc_reg_range, + .size = ARRAY_SIZE(ipq4019_soc_reg_range), + }, + }, +}; + static const struct ath10k_hw_mem_layout hw_mem_layouts[] = { { .hw_id = QCA6174_HW_1_0_VERSION, @@ -945,7 +1040,13 @@ .size = ARRAY_SIZE(qca99x0_hw20_mem_regions), }, }, - + { + .hw_id = QCA4019_HW_1_0_DEV_VERSION, + .region_table = { + .regions = qca4019_hw10_mem_regions, + .size = ARRAY_SIZE(qca4019_hw10_mem_regions), + }, + }, }; static u32 ath10k_coredump_get_ramdump_size(struct ath10k *ar) -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Anilkumar Kolli <akolli@codeaurora.org> To: ath10k@lists.infradead.org Cc: Anilkumar Kolli <akolli@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH 1/2] ath10k: Add memory dump support for QCA4019 Date: Fri, 12 Oct 2018 11:36:36 +0530 [thread overview] Message-ID: <1539324397-10597-1-git-send-email-akolli@codeaurora.org> (raw) This patch adds firmware crash memory dump support for QCA4019. Tested on: QCA4019 firmware 10.4-3.2.1.1-00017 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- drivers/net/wireless/ath/ath10k/coredump.c | 103 +++++++++++++++++++++++++++- 1 file changed, 102 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c index 4d28063052fe..1ccc73c6ef12 100644 --- a/drivers/net/wireless/ath/ath10k/coredump.c +++ b/drivers/net/wireless/ath/ath10k/coredump.c @@ -867,6 +867,101 @@ }, }; +static const struct ath10k_mem_section ipq4019_soc_reg_range[] = { + {0x080000, 0x080004}, + {0x080020, 0x080024}, + {0x080028, 0x080050}, + {0x0800d4, 0x0800ec}, + {0x08010c, 0x080118}, + {0x080284, 0x080290}, + {0x0802a8, 0x0802b8}, + {0x0802dc, 0x08030c}, + {0x082000, 0x083fff} +}; + +static const struct ath10k_mem_region qca4019_hw10_mem_regions[] = { + { + .type = ATH10K_MEM_REGION_TYPE_DRAM, + .start = 0x400000, + .len = 0x68000, + .name = "DRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0xC0000, + .len = 0x40000, + .name = "SRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0x98000, + .len = 0x50000, + .name = "IRAM", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x30000, + .len = 0x7000, + .name = "APB REG 1", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x3f000, + .len = 0x3000, + .name = "APB REG 2", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x43000, + .len = 0x3000, + .name = "WIFI REG", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_IOREG, + .start = 0x4A000, + .len = 0x5000, + .name = "CE REG", + .section_table = { + .sections = NULL, + .size = 0, + }, + }, + { + .type = ATH10K_MEM_REGION_TYPE_REG, + .start = 0x080000, + .len = 0x083fff - 0x080000, + .name = "REG_TOTAL", + .section_table = { + .sections = ipq4019_soc_reg_range, + .size = ARRAY_SIZE(ipq4019_soc_reg_range), + }, + }, +}; + static const struct ath10k_hw_mem_layout hw_mem_layouts[] = { { .hw_id = QCA6174_HW_1_0_VERSION, @@ -945,7 +1040,13 @@ .size = ARRAY_SIZE(qca99x0_hw20_mem_regions), }, }, - + { + .hw_id = QCA4019_HW_1_0_DEV_VERSION, + .region_table = { + .regions = qca4019_hw10_mem_regions, + .size = ARRAY_SIZE(qca4019_hw10_mem_regions), + }, + }, }; static u32 ath10k_coredump_get_ramdump_size(struct ath10k *ar) -- 1.7.9.5 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2018-10-12 6:03 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-12 6:06 Anilkumar Kolli [this message] 2018-10-12 6:06 ` [PATCH 1/2] ath10k: Add memory dump support for QCA4019 Anilkumar Kolli 2018-10-12 6:06 ` [PATCH 2/2] ath10k: assign proper firmware crash dump structure Anilkumar Kolli 2018-10-12 6:06 ` Anilkumar Kolli 2018-11-05 10:11 ` [PATCH 1/2] ath10k: Add memory dump support for QCA4019 Kalle Valo 2018-11-05 10:11 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1539324397-10597-1-git-send-email-akolli@codeaurora.org \ --to=akolli@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.