From: "A.s. Dong" <aisheng.dong@nxp.com> To: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "A.s. Dong" <aisheng.dong@nxp.com>, Mark Rutland <mark.rutland@arm.com>, "dongas86@gmail.com" <dongas86@gmail.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "catalin.marinas@arm.com" <catalin.marinas@arm.com>, "will.deacon@arm.com" <will.deacon@arm.com>, "robh+dt@kernel.org" <robh+dt@kernel.org>, dl-linux-imx <linux-imx@nxp.com>, "kernel@pengutronix.de" <kernel@pengutronix.de>, Fabio Estevam <fabio.estevam@nxp.com>, "shawnguo@kernel.org" <shawnguo@kernel.org> Subject: [PATCH V4 4/5] arm64: dts: imx: add imx8qxp mek support Date: Sat, 10 Nov 2018 15:48:23 +0000 [thread overview] Message-ID: <1541864596-15958-5-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1541864596-15958-1-git-send-email-aisheng.dong@nxp.com> i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful graphic and multimedia features. This patch adds imx8qxp mek board support. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- v3->v4: * remove un-documented enet phy properties v2->v3: * Pad names update * move memory node to here * add no-sd and no-sdio under emmc node --- Documentation/devicetree/bindings/arm/fsl.txt | 4 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 137 ++++++++++++++++++++++++++ 3 files changed, 142 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index baeb1fc..704472b 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -97,6 +97,10 @@ i.MX7 SabreSD Board Required root node properties: - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; +i.MX8QXP MEK Board +Required root node properties: + - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + Generic i.MX boards ------------------- diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 86e18ad..cff87f3 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_SOC_IMX8QXP) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts new file mode 100644 index 0000000..03aad66 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2018 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: aisheng.dong@nxp.com (A.s. Dong) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH V4 4/5] arm64: dts: imx: add imx8qxp mek support Date: Sat, 10 Nov 2018 15:48:23 +0000 [thread overview] Message-ID: <1541864596-15958-5-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1541864596-15958-1-git-send-email-aisheng.dong@nxp.com> i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful graphic and multimedia features. This patch adds imx8qxp mek board support. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree at vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- v3->v4: * remove un-documented enet phy properties v2->v3: * Pad names update * move memory node to here * add no-sd and no-sdio under emmc node --- Documentation/devicetree/bindings/arm/fsl.txt | 4 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 137 ++++++++++++++++++++++++++ 3 files changed, 142 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index baeb1fc..704472b 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -97,6 +97,10 @@ i.MX7 SabreSD Board Required root node properties: - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; +i.MX8QXP MEK Board +Required root node properties: + - compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + Generic i.MX boards ------------------- diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 86e18ad..cff87f3 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_SOC_IMX8QXP) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts new file mode 100644 index 0000000..03aad66 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2018 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart0; + }; + + memory at 80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy at 0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy at 1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; -- 2.7.4
next prev parent reply other threads:[~2018-11-10 15:48 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-10 15:48 [PATCH V4 0/5] arm64: imx: add imx8qxp support A.s. Dong 2018-11-10 15:48 ` [PATCH V4 1/5] dt-bindings: serial: lpuart: add imx8qxp compatible string A.s. Dong 2018-11-10 15:48 ` A.s. Dong 2018-11-10 15:48 ` [PATCH V4 2/5] arm64: imx: add imx8qxp support A.s. Dong 2018-11-10 15:48 ` [PATCH V4 3/5] arm64: dts: " A.s. Dong 2018-11-10 15:48 ` A.s. Dong 2018-11-13 2:06 ` Rob Herring 2018-11-13 2:06 ` Rob Herring 2018-11-13 2:18 ` A.s. Dong 2018-11-13 2:18 ` A.s. Dong 2018-11-10 15:48 ` A.s. Dong [this message] 2018-11-10 15:48 ` [PATCH V4 4/5] arm64: dts: imx: add imx8qxp mek support A.s. Dong 2018-11-13 2:07 ` Rob Herring 2018-11-13 2:07 ` Rob Herring 2018-11-10 15:48 ` [PATCH V4 5/5] defconfig: arm64: add imx8qxp support A.s. Dong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1541864596-15958-5-git-send-email-aisheng.dong@nxp.com \ --to=aisheng.dong@nxp.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=dongas86@gmail.com \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.