All of lore.kernel.org
 help / color / mirror / Atom feed
From: "A.s. Dong" <aisheng.dong@nxp.com>
To: "linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Anson Huang <anson.huang@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"A.s. Dong" <aisheng.dong@nxp.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Subject: [PATCH V6 9/9] clk: imx: add imx7ulp clk driver
Date: Wed, 14 Nov 2018 13:02:08 +0000	[thread overview]
Message-ID: <1542200198-3017-10-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1542200198-3017-1-git-send-email-aisheng.dong@nxp.com>

i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks

The clocking scheme provides clear separation between M4 domain
and A7 domain. Except for a few clock sources shared between two
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
and and the Fast IRC clock (FIRCLK), clock sources and clock
management are separated and contained within each domain.

M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.

This driver only adds clock support in A7 domain.

Note that most clocks required to be operated when gated, e.g. pll,
pfd, pcc. And more special cases that scs/ddr/nic mux selecting
different clock source requires that clock to be enabled first,
then we need set CLK_OPS_PARENT_ENABLE flag for them properly.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

---
ChangeLog:
v5->v6:
 * sosc/firc/dpll/ddr clock should use divider table as they're not 1:1
v4->v5:
 * clk-composite API name changed accordingly
v3->v4:
 * update after changing scg and pcc into separete nodes according to
   Rob's suggestion
v2->v3:
 * no changes
v1->v2:
 * use of_clk_add_hw_provider instead
 * split the clocks register process into two parts: early part for possible
   timers clocks registered by CLK_OF_DECLARE_DRIVER and the later part for
   the left normal peripheral clocks registered by a platform driver.
---
 drivers/clk/imx/Makefile      |   1 +
 drivers/clk/imx/clk-imx7ulp.c | 220 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 221 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx7ulp.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index a5cab3e..615b413 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
+obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
new file mode 100644
index 0000000..3b7507f
--- /dev/null
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+static const char * const pll_pre_sels[]	= { "sosc", "firc", };
+static const char * const spll_pfd_sels[]	= { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
+static const char * const spll_sels[]		= { "spll", "spll_pfd_sel", };
+static const char * const apll_pfd_sels[]	= { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
+static const char * const apll_sels[]		= { "apll", "apll_pfd_sel", };
+static const char * const scs_sels[]		= { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "upll", };
+static const char * const ddr_sels[]		= { "apll_pfd_sel", "upll", };
+static const char * const nic_sels[]		= { "firc", "ddr_clk", };
+static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
+static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
+
+/* used by sosc/sirc/firc/ddr/spll/apll dividers */
+static const struct clk_div_table ulp_div_table[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ .val = 4, .div = 8, },
+	{ .val = 5, .div = 16, },
+	{ .val = 6, .div = 32, },
+	{ .val = 7, .div = 64, },
+};
+
+static void __init imx7ulp_clk_scg1_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_SCG1_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_SCG1_END;
+	clks = clk_data->hws;
+
+	clks[IMX7ULP_CLK_DUMMY]		= imx_clk_hw_fixed("dummy", 0);
+
+	clks[IMX7ULP_CLK_ROSC]		= imx_obtain_fixed_clk_hw(np, "rosc");
+	clks[IMX7ULP_CLK_SOSC]		= imx_obtain_fixed_clk_hw(np, "sosc");
+	clks[IMX7ULP_CLK_SIRC]		= imx_obtain_fixed_clk_hw(np, "sirc");
+	clks[IMX7ULP_CLK_FIRC]		= imx_obtain_fixed_clk_hw(np, "firc");
+	clks[IMX7ULP_CLK_MIPI_PLL]	= imx_obtain_fixed_clk_hw(np, "mpll");
+	clks[IMX7ULP_CLK_UPLL]		= imx_obtain_fixed_clk_hw(np, "upll");
+
+	/* SCG1 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/* NOTE: xPLL config can't be changed when xPLL is enabled */
+	clks[IMX7ULP_CLK_APLL_PRE_SEL]	= imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_SEL]	= imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+
+	/*							   name		    parent_name	   reg			shift	width	flags */
+	clks[IMX7ULP_CLK_APLL_PRE_DIV]	= imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508,	8,	3,	CLK_SET_RATE_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_DIV]	= imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608,	8,	3,	CLK_SET_RATE_GATE);
+
+	/*						name	 parent_name	 base */
+	clks[IMX7ULP_CLK_APLL]		= imx_clk_pllv4("apll",  "apll_pre_div", base + 0x500);
+	clks[IMX7ULP_CLK_SPLL]		= imx_clk_pllv4("spll",  "spll_pre_div", base + 0x600);
+
+	/* APLL PFDs */
+	clks[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
+	clks[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
+	clks[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
+	clks[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
+
+	/* SPLL PFDs */
+	clks[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
+	clks[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
+	clks[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
+	clks[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
+
+	/* PLL Mux */
+	clks[IMX7ULP_CLK_APLL_PFD_SEL]	= imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PFD_SEL]	= imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_APLL_SEL]	= imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_SEL]	= imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+
+	clks[IMX7ULP_CLK_SPLL_BUS_CLK]	= imx_clk_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
+
+	/* scs/ddr/nic select different clock source requires that clock to be enabled first */
+	clks[IMX7ULP_CLK_SYS_SEL]	= imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
+	clks[IMX7ULP_CLK_NIC_SEL]	= imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
+	clks[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+
+	clks[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_DDR_DIV]	= imx_clk_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
+							       0, ulp_div_table, &imx_ccm_lock);
+
+	clks[IMX7ULP_CLK_NIC0_DIV]	= imx_clk_hw_divider_flags("nic0_clk",		"nic_sel",  base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_DIV]	= imx_clk_hw_divider_flags("nic1_clk",		"nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_BUS_DIV]	= imx_clk_hw_divider_flags("nic1_bus_clk",	"nic1_clk", base + 0x40, 4,  4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_GPU_DIV]	= imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
+
+	clks[IMX7ULP_CLK_SOSC_BUS_CLK]	= imx_clk_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_FIRC_BUS_CLK]	= imx_clk_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
+
+static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC2_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC2_END;
+	clks = clk_data->hws;
+
+	/* PCC2 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_DMA1]		= imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
+	clks[IMX7ULP_CLK_RGPIO2P1]	= imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
+	clks[IMX7ULP_CLK_DMA_MUX1]	= imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
+	clks[IMX7ULP_CLK_SNVS]		= imx_clk_hw_gate("snvs", "nic1_bus_clk", base + 0x8c, 30);
+	clks[IMX7ULP_CLK_CAAM]		= imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
+	clks[IMX7ULP_CLK_LPTPM4]	= imx7ulp_clk_composite("lptpm4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPTPM5]	= imx7ulp_clk_composite("lptpm5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPIT1]		= imx7ulp_clk_composite("lpit1",   periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_LPSPI2]	= imx7ulp_clk_composite("lpspi2",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
+	clks[IMX7ULP_CLK_LPSPI3]	= imx7ulp_clk_composite("lpspi3",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
+	clks[IMX7ULP_CLK_LPI2C4]	= imx7ulp_clk_composite("lpi2c4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
+	clks[IMX7ULP_CLK_LPI2C5]	= imx7ulp_clk_composite("lpi2c5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
+	clks[IMX7ULP_CLK_LPUART4]	= imx7ulp_clk_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
+	clks[IMX7ULP_CLK_LPUART5]	= imx7ulp_clk_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
+	clks[IMX7ULP_CLK_FLEXIO1]	= imx7ulp_clk_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
+	clks[IMX7ULP_CLK_USB0]		= imx7ulp_clk_composite("usb0",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xcc);
+	clks[IMX7ULP_CLK_USB1]		= imx7ulp_clk_composite("usb1",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xd0);
+	clks[IMX7ULP_CLK_USB_PHY]	= imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
+	clks[IMX7ULP_CLK_USDHC0]	= imx7ulp_clk_composite("usdhc0",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xdc);
+	clks[IMX7ULP_CLK_USDHC1]	= imx7ulp_clk_composite("usdhc1",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xe0);
+	clks[IMX7ULP_CLK_WDG1]		= imx7ulp_clk_composite("wdg1",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xf4);
+	clks[IMX7ULP_CLK_WDG2]		= imx7ulp_clk_composite("sdg2",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0x10c);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
+
+static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC3_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC3_END;
+	clks = clk_data->hws;
+
+	/* PCC3 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_LPTPM6]	= imx7ulp_clk_composite("lptpm6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
+	clks[IMX7ULP_CLK_LPTPM7]	= imx7ulp_clk_composite("lptpm7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
+
+	clks[IMX7ULP_CLK_MMDC]		= clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+							       base + 0xac, 30, 0, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_LPI2C6]	= imx7ulp_clk_composite("lpi2c6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
+	clks[IMX7ULP_CLK_LPI2C7]	= imx7ulp_clk_composite("lpi2c7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPUART6]	= imx7ulp_clk_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPUART7]	= imx7ulp_clk_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_DSI]		= imx7ulp_clk_composite("dsi",     periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xa4);
+	clks[IMX7ULP_CLK_LCDIF]		= imx7ulp_clk_composite("lcdif",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xa8);
+
+	clks[IMX7ULP_CLK_VIU]		= imx_clk_hw_gate("viu",   "nic1_clk",	   base + 0xa0, 30);
+	clks[IMX7ULP_CLK_PCTLC]		= imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
+	clks[IMX7ULP_CLK_PCTLD]		= imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
+	clks[IMX7ULP_CLK_PCTLE]		= imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
+	clks[IMX7ULP_CLK_PCTLF]		= imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
+
+	clks[IMX7ULP_CLK_GPU3D]		= imx7ulp_clk_composite("gpu3d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
+	clks[IMX7ULP_CLK_GPU2D]		= imx7ulp_clk_composite("gpu2d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: aisheng.dong@nxp.com (A.s. Dong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V6 9/9] clk: imx: add imx7ulp clk driver
Date: Wed, 14 Nov 2018 13:02:08 +0000	[thread overview]
Message-ID: <1542200198-3017-10-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1542200198-3017-1-git-send-email-aisheng.dong@nxp.com>

i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks

The clocking scheme provides clear separation between M4 domain
and A7 domain. Except for a few clock sources shared between two
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
and and the Fast IRC clock (FIRCLK), clock sources and clock
management are separated and contained within each domain.

M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.

This driver only adds clock support in A7 domain.

Note that most clocks required to be operated when gated, e.g. pll,
pfd, pcc. And more special cases that scs/ddr/nic mux selecting
different clock source requires that clock to be enabled first,
then we need set CLK_OPS_PARENT_ENABLE flag for them properly.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

---
ChangeLog:
v5->v6:
 * sosc/firc/dpll/ddr clock should use divider table as they're not 1:1
v4->v5:
 * clk-composite API name changed accordingly
v3->v4:
 * update after changing scg and pcc into separete nodes according to
   Rob's suggestion
v2->v3:
 * no changes
v1->v2:
 * use of_clk_add_hw_provider instead
 * split the clocks register process into two parts: early part for possible
   timers clocks registered by CLK_OF_DECLARE_DRIVER and the later part for
   the left normal peripheral clocks registered by a platform driver.
---
 drivers/clk/imx/Makefile      |   1 +
 drivers/clk/imx/clk-imx7ulp.c | 220 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 221 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx7ulp.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index a5cab3e..615b413 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
+obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
new file mode 100644
index 0000000..3b7507f
--- /dev/null
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+static const char * const pll_pre_sels[]	= { "sosc", "firc", };
+static const char * const spll_pfd_sels[]	= { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
+static const char * const spll_sels[]		= { "spll", "spll_pfd_sel", };
+static const char * const apll_pfd_sels[]	= { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
+static const char * const apll_sels[]		= { "apll", "apll_pfd_sel", };
+static const char * const scs_sels[]		= { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "upll", };
+static const char * const ddr_sels[]		= { "apll_pfd_sel", "upll", };
+static const char * const nic_sels[]		= { "firc", "ddr_clk", };
+static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
+static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
+
+/* used by sosc/sirc/firc/ddr/spll/apll dividers */
+static const struct clk_div_table ulp_div_table[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ .val = 4, .div = 8, },
+	{ .val = 5, .div = 16, },
+	{ .val = 6, .div = 32, },
+	{ .val = 7, .div = 64, },
+};
+
+static void __init imx7ulp_clk_scg1_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_SCG1_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_SCG1_END;
+	clks = clk_data->hws;
+
+	clks[IMX7ULP_CLK_DUMMY]		= imx_clk_hw_fixed("dummy", 0);
+
+	clks[IMX7ULP_CLK_ROSC]		= imx_obtain_fixed_clk_hw(np, "rosc");
+	clks[IMX7ULP_CLK_SOSC]		= imx_obtain_fixed_clk_hw(np, "sosc");
+	clks[IMX7ULP_CLK_SIRC]		= imx_obtain_fixed_clk_hw(np, "sirc");
+	clks[IMX7ULP_CLK_FIRC]		= imx_obtain_fixed_clk_hw(np, "firc");
+	clks[IMX7ULP_CLK_MIPI_PLL]	= imx_obtain_fixed_clk_hw(np, "mpll");
+	clks[IMX7ULP_CLK_UPLL]		= imx_obtain_fixed_clk_hw(np, "upll");
+
+	/* SCG1 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/* NOTE: xPLL config can't be changed when xPLL is enabled */
+	clks[IMX7ULP_CLK_APLL_PRE_SEL]	= imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_SEL]	= imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+
+	/*							   name		    parent_name	   reg			shift	width	flags */
+	clks[IMX7ULP_CLK_APLL_PRE_DIV]	= imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508,	8,	3,	CLK_SET_RATE_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_DIV]	= imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608,	8,	3,	CLK_SET_RATE_GATE);
+
+	/*						name	 parent_name	 base */
+	clks[IMX7ULP_CLK_APLL]		= imx_clk_pllv4("apll",  "apll_pre_div", base + 0x500);
+	clks[IMX7ULP_CLK_SPLL]		= imx_clk_pllv4("spll",  "spll_pre_div", base + 0x600);
+
+	/* APLL PFDs */
+	clks[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
+	clks[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
+	clks[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
+	clks[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
+
+	/* SPLL PFDs */
+	clks[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
+	clks[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
+	clks[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
+	clks[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
+
+	/* PLL Mux */
+	clks[IMX7ULP_CLK_APLL_PFD_SEL]	= imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PFD_SEL]	= imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_APLL_SEL]	= imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_SEL]	= imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+
+	clks[IMX7ULP_CLK_SPLL_BUS_CLK]	= imx_clk_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
+
+	/* scs/ddr/nic select different clock source requires that clock to be enabled first */
+	clks[IMX7ULP_CLK_SYS_SEL]	= imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
+	clks[IMX7ULP_CLK_NIC_SEL]	= imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
+	clks[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+
+	clks[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_DDR_DIV]	= imx_clk_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
+							       0, ulp_div_table, &imx_ccm_lock);
+
+	clks[IMX7ULP_CLK_NIC0_DIV]	= imx_clk_hw_divider_flags("nic0_clk",		"nic_sel",  base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_DIV]	= imx_clk_hw_divider_flags("nic1_clk",		"nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_BUS_DIV]	= imx_clk_hw_divider_flags("nic1_bus_clk",	"nic1_clk", base + 0x40, 4,  4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_GPU_DIV]	= imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
+
+	clks[IMX7ULP_CLK_SOSC_BUS_CLK]	= imx_clk_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_FIRC_BUS_CLK]	= imx_clk_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
+
+static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC2_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC2_END;
+	clks = clk_data->hws;
+
+	/* PCC2 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_DMA1]		= imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
+	clks[IMX7ULP_CLK_RGPIO2P1]	= imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
+	clks[IMX7ULP_CLK_DMA_MUX1]	= imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
+	clks[IMX7ULP_CLK_SNVS]		= imx_clk_hw_gate("snvs", "nic1_bus_clk", base + 0x8c, 30);
+	clks[IMX7ULP_CLK_CAAM]		= imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
+	clks[IMX7ULP_CLK_LPTPM4]	= imx7ulp_clk_composite("lptpm4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPTPM5]	= imx7ulp_clk_composite("lptpm5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPIT1]		= imx7ulp_clk_composite("lpit1",   periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_LPSPI2]	= imx7ulp_clk_composite("lpspi2",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
+	clks[IMX7ULP_CLK_LPSPI3]	= imx7ulp_clk_composite("lpspi3",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
+	clks[IMX7ULP_CLK_LPI2C4]	= imx7ulp_clk_composite("lpi2c4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
+	clks[IMX7ULP_CLK_LPI2C5]	= imx7ulp_clk_composite("lpi2c5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
+	clks[IMX7ULP_CLK_LPUART4]	= imx7ulp_clk_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
+	clks[IMX7ULP_CLK_LPUART5]	= imx7ulp_clk_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
+	clks[IMX7ULP_CLK_FLEXIO1]	= imx7ulp_clk_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
+	clks[IMX7ULP_CLK_USB0]		= imx7ulp_clk_composite("usb0",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xcc);
+	clks[IMX7ULP_CLK_USB1]		= imx7ulp_clk_composite("usb1",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xd0);
+	clks[IMX7ULP_CLK_USB_PHY]	= imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
+	clks[IMX7ULP_CLK_USDHC0]	= imx7ulp_clk_composite("usdhc0",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xdc);
+	clks[IMX7ULP_CLK_USDHC1]	= imx7ulp_clk_composite("usdhc1",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xe0);
+	clks[IMX7ULP_CLK_WDG1]		= imx7ulp_clk_composite("wdg1",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xf4);
+	clks[IMX7ULP_CLK_WDG2]		= imx7ulp_clk_composite("sdg2",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0x10c);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
+
+static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC3_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC3_END;
+	clks = clk_data->hws;
+
+	/* PCC3 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_LPTPM6]	= imx7ulp_clk_composite("lptpm6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
+	clks[IMX7ULP_CLK_LPTPM7]	= imx7ulp_clk_composite("lptpm7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
+
+	clks[IMX7ULP_CLK_MMDC]		= clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+							       base + 0xac, 30, 0, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_LPI2C6]	= imx7ulp_clk_composite("lpi2c6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
+	clks[IMX7ULP_CLK_LPI2C7]	= imx7ulp_clk_composite("lpi2c7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPUART6]	= imx7ulp_clk_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPUART7]	= imx7ulp_clk_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_DSI]		= imx7ulp_clk_composite("dsi",     periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xa4);
+	clks[IMX7ULP_CLK_LCDIF]		= imx7ulp_clk_composite("lcdif",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xa8);
+
+	clks[IMX7ULP_CLK_VIU]		= imx_clk_hw_gate("viu",   "nic1_clk",	   base + 0xa0, 30);
+	clks[IMX7ULP_CLK_PCTLC]		= imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
+	clks[IMX7ULP_CLK_PCTLD]		= imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
+	clks[IMX7ULP_CLK_PCTLE]		= imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
+	clks[IMX7ULP_CLK_PCTLF]		= imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
+
+	clks[IMX7ULP_CLK_GPU3D]		= imx7ulp_clk_composite("gpu3d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
+	clks[IMX7ULP_CLK_GPU2D]		= imx7ulp_clk_composite("gpu2d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
-- 
2.7.4

  parent reply	other threads:[~2018-11-14 13:02 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-14 13:01 [PATCH V6 0/9] clk: add imx7ulp clk support A.s. Dong
2018-11-14 13:01 ` A.s. Dong
2018-11-14 13:01 ` [PATCH V6 1/9] clk: imx: add gatable clock divider support A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:31   ` Stephen Boyd
2018-12-03 19:31     ` Stephen Boyd
2018-11-14 13:01 ` [PATCH V6 2/9] clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:31   ` Stephen Boyd
2018-12-03 19:31     ` Stephen Boyd
2018-11-14 13:01 ` [PATCH V6 3/9] clk: imx: add pllv4 support A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:31   ` Stephen Boyd
2018-12-03 19:31     ` Stephen Boyd
2018-11-14 13:01 ` [PATCH V6 4/9] clk: imx: add pfdv2 support A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:31   ` Stephen Boyd
2018-12-03 19:31     ` Stephen Boyd
2018-11-14 13:01 ` [PATCH V6 5/9] clk: imx: add imx7ulp composite clk support A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:31   ` Stephen Boyd
2018-12-03 19:31     ` Stephen Boyd
2018-11-14 13:01 ` [PATCH V6 6/9] dt-bindings: clock: add imx7ulp clock binding doc A.s. Dong
2018-11-14 13:01   ` A.s. Dong
2018-12-03 19:32   ` Stephen Boyd
2018-12-03 19:32     ` Stephen Boyd
2018-11-14 13:02 ` [PATCH V6 7/9] clk: imx: make mux parent strings const A.s. Dong
2018-11-14 13:02   ` A.s. Dong
2018-12-03 19:32   ` Stephen Boyd
2018-12-03 19:32     ` Stephen Boyd
2018-11-14 13:02 ` [PATCH V6 8/9] clk: imx: implement new clk_hw based APIs A.s. Dong
2018-11-14 13:02   ` A.s. Dong
2018-12-03 19:32   ` Stephen Boyd
2018-12-03 19:32     ` Stephen Boyd
2018-11-14 13:02 ` A.s. Dong [this message]
2018-11-14 13:02   ` [PATCH V6 9/9] clk: imx: add imx7ulp clk driver A.s. Dong
2018-12-03 19:32   ` Stephen Boyd
2018-12-03 19:32     ` Stephen Boyd
2018-12-03 19:31 ` [PATCH V6 0/9] clk: add imx7ulp clk support Stephen Boyd
2018-12-03 19:31   ` Stephen Boyd
2018-12-04  1:29   ` Aisheng DONG
2018-12-04  1:29     ` Aisheng DONG
2018-12-05 19:41     ` Stephen Boyd
2018-12-05 19:41       ` Stephen Boyd
2018-12-10  8:14       ` Shawn Guo
2018-12-10  8:14         ` Shawn Guo
2018-12-10 19:20         ` Stephen Boyd
2018-12-10 19:20           ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542200198-3017-10-git-send-email-aisheng.dong@nxp.com \
    --to=aisheng.dong@nxp.com \
    --cc=anson.huang@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=ping.bai@nxp.com \
    --cc=sboyd@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.