From: Abel Vesa <abel.vesa@nxp.com> To: Lucas Stach <l.stach@pengutronix.de>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org> Cc: dl-linux-imx <linux-imx@nxp.com>, Fabio Estevam <fabio.estevam@nxp.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Aisheng Dong <aisheng.dong@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, "patchwork-lst@pengutronix.de" <patchwork-lst@pengutronix.de>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Abel Vesa <abelvesa@linux.com>, Abel Vesa <abel.vesa@nxp.com>, Baruch Siach <baruch@tkos.co.il> Subject: [PATCH v5 6/6] arm64: dts: imx8mq-evk: enable watchdog Date: Sun, 9 Dec 2018 14:26:11 +0000 [thread overview] Message-ID: <1544365552-30270-7-git-send-email-abel.vesa@nxp.com> (raw) In-Reply-To: <1544365552-30270-1-git-send-email-abel.vesa@nxp.com> From: Baruch Siach <baruch@tkos.co.il> The external nWDOG signal connects to the EVK board reset circuit. Tested on the i.MX8MQ EVK rev B3. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 04ce13f..64acccc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -160,6 +160,13 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -287,4 +294,10 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 >; }; + + pinctrl_wdog: wdog1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@nxp.com> To: Lucas Stach <l.stach@pengutronix.de>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org> Cc: Aisheng Dong <aisheng.dong@nxp.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Baruch Siach <baruch@tkos.co.il>, Abel Vesa <abel.vesa@nxp.com>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, "patchwork-lst@pengutronix.de" <patchwork-lst@pengutronix.de>, Abel Vesa <abelvesa@linux.com>, dl-linux-imx <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <fabio.estevam@nxp.com> Subject: [PATCH v5 6/6] arm64: dts: imx8mq-evk: enable watchdog Date: Sun, 9 Dec 2018 14:26:11 +0000 [thread overview] Message-ID: <1544365552-30270-7-git-send-email-abel.vesa@nxp.com> (raw) In-Reply-To: <1544365552-30270-1-git-send-email-abel.vesa@nxp.com> From: Baruch Siach <baruch@tkos.co.il> The external nWDOG signal connects to the EVK board reset circuit. Tested on the i.MX8MQ EVK rev B3. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 04ce13f..64acccc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -160,6 +160,13 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -287,4 +294,10 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 >; }; + + pinctrl_wdog: wdog1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-09 14:26 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-09 14:26 [PATCH v5 0/6] Add basic support for i.MX8MQ SoC and i.MX8MQ EVK board Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` [PATCH v5 1/6] arm64: add basic Kconfig symbols for i.MX8 Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-16 9:14 ` Shawn Guo 2018-12-16 9:14 ` Shawn Guo 2018-12-16 9:14 ` Shawn Guo 2018-12-09 14:26 ` [PATCH v5 2/6] arm64: add basic DTS for i.MX8MQ Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-10 22:18 ` Rob Herring 2018-12-10 22:18 ` Rob Herring 2018-12-10 22:18 ` Rob Herring 2018-12-09 14:26 ` [PATCH v5 3/6] arm64: add support for i.MX8M EVK board Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-16 9:17 ` Shawn Guo 2018-12-16 9:17 ` Shawn Guo 2018-12-16 9:17 ` Shawn Guo 2018-12-09 14:26 ` [PATCH v5 4/6] MAINTAINERS: add i.MX8 DT path to i.MX architecture Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` [PATCH v5 5/6] arm64: dts: imx8mq: add watchdog devices Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-09 14:26 ` Abel Vesa [this message] 2018-12-09 14:26 ` [PATCH v5 6/6] arm64: dts: imx8mq-evk: enable watchdog Abel Vesa 2018-12-09 14:26 ` Abel Vesa 2018-12-11 8:09 ` [PATCH v5 0/6] Add basic support for i.MX8MQ SoC and i.MX8MQ EVK board Shawn Guo 2018-12-11 8:09 ` Shawn Guo 2018-12-11 8:09 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1544365552-30270-7-git-send-email-abel.vesa@nxp.com \ --to=abel.vesa@nxp.com \ --cc=abelvesa@linux.com \ --cc=aisheng.dong@nxp.com \ --cc=baruch@tkos.co.il \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=patchwork-lst@pengutronix.de \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.