All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Jeykumar Sankaran
	<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v3 3/3] drm/msm/dpu: add display port support in DPU
Date: Thu, 13 Dec 2018 10:51:04 -0800	[thread overview]
Message-ID: <1544727064-26763-3-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1544727064-26763-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)
changes in v3:
	- add dp support after fixing
	  the current code base for error logging (Sean Paul)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 51 +++++++++++++++++++++++++----
 2 files changed, 49 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 36158b7..b79fd9d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2029,7 +2029,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;
 	struct dpu_enc_phys_init_params phys_params;
 
 	if (!dpu_enc || !dpu_kms) {
@@ -2052,9 +2052,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}
 
 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 39c8549..ba3e75c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -437,6 +437,32 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
 	return rc;
 }
 
+static int _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc = 0;
+
+	if (!priv->dp)
+		return rc;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return PTR_ERR(encoder);
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return rc;
+	}
+
+	return rc;
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -457,6 +483,12 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
 		return rc;
 	}
 
+	rc = _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+	if (rc) {
+		DPU_ERROR("failed to initialize display port, rc = %d\n", rc);
+		return rc;
+	}
+
 	/**
 	 * Extend this function to initialize other
 	 * types of displays
@@ -675,13 +707,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-12-13 18:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13 18:51 [PATCH v3 1/3] drm/msm/dpu: fix documentation for intf_type Jeykumar Sankaran
     [not found] ` <1544727064-26763-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-12-13 18:51   ` [PATCH v3 2/3] drm/msm/dpu: handle failures while initializing displays Jeykumar Sankaran
     [not found]     ` <1544727064-26763-2-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-12-14 15:22       ` Sean Paul
2018-12-17 19:35         ` Jeykumar Sankaran
2018-12-17 20:27         ` Jeykumar Sankaran
2018-12-14 15:36       ` Jordan Crouse
2018-12-13 18:51   ` Jeykumar Sankaran [this message]
     [not found]     ` <1544727064-26763-3-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-12-14 15:26       ` [PATCH v3 3/3] drm/msm/dpu: add display port support in DPU Sean Paul
2018-12-14 15:27       ` Jordan Crouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544727064-26763-3-git-send-email-jsanka@codeaurora.org \
    --to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.