All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sumit Garg <sumit.garg@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, jens.wiklander@linaro.org,
	mpm@selenic.com, herbert@gondor.apana.org.au, robh+dt@kernel.org,
	mark.rutland@arm.com, arnd@arndb.de, gregkh@linuxfoundation.org,
	daniel.thompson@linaro.org, ard.biesheuvel@linaro.org,
	bhsharma@redhat.com, tee-dev@lists.linaro.org,
	Sumit Garg <sumit.garg@linaro.org>
Subject: [PATCH v2 4/4] hwrng: add OP-TEE based rng driver
Date: Thu, 10 Jan 2019 17:54:57 +0530	[thread overview]
Message-ID: <1547123097-16431-5-git-send-email-sumit.garg@linaro.org> (raw)
In-Reply-To: <1547123097-16431-1-git-send-email-sumit.garg@linaro.org>

On ARM SoC's with TrustZone enabled, peripherals like entropy sources
might not be accessible to normal world (linux in this case) and rather
accessible to secure world (OP-TEE in this case) only. So this driver
aims to provides a generic interface to OP-TEE based random number
generator service.

This driver registers on TEE bus to interact with OP-TEE based rng
device/service.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 MAINTAINERS                        |   5 +
 drivers/char/hw_random/Kconfig     |  15 ++
 drivers/char/hw_random/Makefile    |   1 +
 drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
 4 files changed, 293 insertions(+)
 create mode 100644 drivers/char/hw_random/optee-rng.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 32d44447..502733c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11260,6 +11260,11 @@ M:	Jens Wiklander <jens.wiklander@linaro.org>
 S:	Maintained
 F:	drivers/tee/optee/
 
+OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
+M:	Sumit Garg <sumit.garg@linaro.org>
+S:	Maintained
+F:	drivers/char/hw_random/optee-rng.c
+
 OPA-VNIC DRIVER
 M:	Dennis Dalessandro <dennis.dalessandro@intel.com>
 M:	Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index dac895d..25a7d8f 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
 	  will be called exynos-trng.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_OPTEE
+	tristate "OP-TEE based Random Number Generator support"
+	depends on OPTEE
+	default HW_RANDOM
+	help
+	  This  driver provides support for OP-TEE based Random Number
+	  Generator on ARM SoCs where hardware entropy sources are not
+	  accessible to normal world (Linux).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called optee-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e35ec3c..7c9ef4a 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
 obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
 obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
 obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
+obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
new file mode 100644
index 0000000..ebfe1f2c
--- /dev/null
+++ b/drivers/char/hw_random/optee-rng.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/hw_random.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#define DRIVER_NAME "optee-rng"
+
+#define TEE_ERROR_HEALTH_TEST_FAIL	0x00000001
+
+/*
+ * TA_CMD_GET_ENTROPY - Get Entropy from RNG
+ *
+ * param[0] (inout memref) - Entropy buffer memory reference
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
+ * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
+ */
+#define TA_CMD_GET_ENTROPY		0x0
+
+/*
+ * TA_CMD_GET_RNG_INFO - Get RNG information
+ *
+ * param[0] (out value) - value.a: RNG data-rate in bytes per second
+ *                        value.b: Quality/Entropy per 1024 bit of data
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ */
+#define TA_CMD_GET_RNG_INFO		0x1
+
+#define MAX_ENTROPY_REQ_SZ		(4 * 1024)
+
+static struct tee_context *ctx;
+static struct tee_shm *entropy_shm_pool;
+static u32 ta_rng_data_rate;
+static u32 ta_rng_session_id;
+
+static size_t get_optee_rng_data(void *buf, size_t req_size)
+{
+	u32 ret = 0;
+	u8 *rng_data = NULL;
+	size_t rng_size = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_RNG function of Trusted App */
+	inv_arg.func = TA_CMD_GET_ENTROPY;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+	param[0].u.memref.shm = entropy_shm_pool;
+	param[0].u.memref.size = req_size;
+	param[0].u.memref.shm_offs = 0;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
+		       inv_arg.ret);
+		return 0;
+	}
+
+	rng_data = tee_shm_get_va(entropy_shm_pool, 0);
+	if (IS_ERR(rng_data)) {
+		pr_err("tee_shm_get_va failed\n");
+		return 0;
+	}
+
+	rng_size = param[0].u.memref.size;
+	memcpy(buf, rng_data, rng_size);
+
+	return rng_size;
+}
+
+static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	u8 *data = buf;
+	size_t read = 0, rng_size = 0;
+	int timeout = 1;
+
+	if (max > MAX_ENTROPY_REQ_SZ)
+		max = MAX_ENTROPY_REQ_SZ;
+
+	while (read == 0) {
+		rng_size = get_optee_rng_data(data, (max - read));
+
+		data += rng_size;
+		read += rng_size;
+
+		if (wait) {
+			if (timeout-- == 0)
+				return read;
+			msleep((1000 * (max - read)) / ta_rng_data_rate);
+		} else {
+			return read;
+		}
+	}
+
+	return read;
+}
+
+static int optee_rng_init(struct hwrng *rng)
+{
+	entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
+					 TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+	if (IS_ERR(entropy_shm_pool)) {
+		pr_err("tee_shm_alloc failed\n");
+		return PTR_ERR(entropy_shm_pool);
+	}
+
+	return 0;
+}
+
+static void optee_rng_cleanup(struct hwrng *rng)
+{
+	tee_shm_free(entropy_shm_pool);
+}
+
+static struct hwrng optee_rng = {
+	.name		= DRIVER_NAME,
+	.init		= optee_rng_init,
+	.cleanup	= optee_rng_cleanup,
+	.read		= optee_rng_read,
+};
+
+static int get_optee_rng_info(void)
+{
+	u32 ret = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_RNG function of Trusted App */
+	inv_arg.func = TA_CMD_GET_RNG_INFO;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		pr_err("TA_CMD_GET_RNG_INFO invoke function error: %x\n",
+		       inv_arg.ret);
+		return -EINVAL;
+	}
+
+	ta_rng_data_rate = param[0].u.value.a;
+	optee_rng.quality = param[0].u.value.b;
+
+	return 0;
+}
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+		return 1;
+	else
+		return 0;
+}
+
+static int optee_rng_probe(struct device *dev)
+{
+	struct tee_client_device *rng_device = to_tee_client_device(dev);
+	int ret = 0, err = -ENODEV;
+	struct tee_ioctl_open_session_arg sess_arg = {0};
+
+	/* Open context with TEE driver */
+	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+	if (IS_ERR(ctx))
+		return -ENODEV;
+
+	/* Open session with hwrng Trusted App */
+	memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	ret = tee_client_open_session(ctx, &sess_arg, NULL);
+	if ((ret < 0) || (sess_arg.ret != 0)) {
+		pr_err("tee_client_open_session failed, error: %x\n",
+		       sess_arg.ret);
+		err = -EINVAL;
+		goto out_ctx;
+	}
+	ta_rng_session_id = sess_arg.session;
+
+	err = get_optee_rng_info();
+	if (err)
+		goto out_sess;
+
+	err = hwrng_register(&optee_rng);
+	if (err) {
+		pr_err("registering failed (%d)\n", err);
+		goto out_sess;
+	}
+
+	return 0;
+
+out_sess:
+	tee_client_close_session(ctx, ta_rng_session_id);
+out_ctx:
+	tee_client_close_context(ctx);
+
+	return err;
+}
+
+static int optee_rng_remove(struct device *dev)
+{
+	tee_client_close_session(ctx, ta_rng_session_id);
+	tee_client_close_context(ctx);
+	hwrng_unregister(&optee_rng);
+
+	return 0;
+}
+
+const struct tee_client_device_id optee_rng_id_table[] = {
+	{UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
+		   0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)},
+	{}
+};
+
+static struct tee_client_driver optee_rng_driver = {
+	.id_table	= optee_rng_id_table,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.bus		= &tee_bus_type,
+		.probe		= optee_rng_probe,
+		.remove		= optee_rng_remove,
+	},
+};
+
+static int __init mod_init(void)
+{
+	int rc;
+
+	rc = driver_register(&optee_rng_driver.driver);
+	if (rc)
+		pr_warn("driver registration failed, err: %d", rc);
+
+	return rc;
+}
+
+static void __exit mod_exit(void)
+{
+	driver_unregister(&optee_rng_driver.driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>");
+MODULE_DESCRIPTION("OP-TEE based random number generator driver");
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Sumit Garg <sumit.garg@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-crypto@vger.kernel.org
Cc: mark.rutland@arm.com, Sumit Garg <sumit.garg@linaro.org>,
	daniel.thompson@linaro.org, herbert@gondor.apana.org.au,
	arnd@arndb.de, ard.biesheuvel@linaro.org,
	gregkh@linuxfoundation.org, bhsharma@redhat.com,
	linux-kernel@vger.kernel.org, tee-dev@lists.linaro.org,
	robh+dt@kernel.org, mpm@selenic.com, jens.wiklander@linaro.org
Subject: [PATCH v2 4/4] hwrng: add OP-TEE based rng driver
Date: Thu, 10 Jan 2019 17:54:57 +0530	[thread overview]
Message-ID: <1547123097-16431-5-git-send-email-sumit.garg@linaro.org> (raw)
In-Reply-To: <1547123097-16431-1-git-send-email-sumit.garg@linaro.org>

On ARM SoC's with TrustZone enabled, peripherals like entropy sources
might not be accessible to normal world (linux in this case) and rather
accessible to secure world (OP-TEE in this case) only. So this driver
aims to provides a generic interface to OP-TEE based random number
generator service.

This driver registers on TEE bus to interact with OP-TEE based rng
device/service.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 MAINTAINERS                        |   5 +
 drivers/char/hw_random/Kconfig     |  15 ++
 drivers/char/hw_random/Makefile    |   1 +
 drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
 4 files changed, 293 insertions(+)
 create mode 100644 drivers/char/hw_random/optee-rng.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 32d44447..502733c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11260,6 +11260,11 @@ M:	Jens Wiklander <jens.wiklander@linaro.org>
 S:	Maintained
 F:	drivers/tee/optee/
 
+OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
+M:	Sumit Garg <sumit.garg@linaro.org>
+S:	Maintained
+F:	drivers/char/hw_random/optee-rng.c
+
 OPA-VNIC DRIVER
 M:	Dennis Dalessandro <dennis.dalessandro@intel.com>
 M:	Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index dac895d..25a7d8f 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
 	  will be called exynos-trng.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_OPTEE
+	tristate "OP-TEE based Random Number Generator support"
+	depends on OPTEE
+	default HW_RANDOM
+	help
+	  This  driver provides support for OP-TEE based Random Number
+	  Generator on ARM SoCs where hardware entropy sources are not
+	  accessible to normal world (Linux).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called optee-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e35ec3c..7c9ef4a 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
 obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
 obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
 obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
+obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
new file mode 100644
index 0000000..ebfe1f2c
--- /dev/null
+++ b/drivers/char/hw_random/optee-rng.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/hw_random.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#define DRIVER_NAME "optee-rng"
+
+#define TEE_ERROR_HEALTH_TEST_FAIL	0x00000001
+
+/*
+ * TA_CMD_GET_ENTROPY - Get Entropy from RNG
+ *
+ * param[0] (inout memref) - Entropy buffer memory reference
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
+ * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
+ */
+#define TA_CMD_GET_ENTROPY		0x0
+
+/*
+ * TA_CMD_GET_RNG_INFO - Get RNG information
+ *
+ * param[0] (out value) - value.a: RNG data-rate in bytes per second
+ *                        value.b: Quality/Entropy per 1024 bit of data
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ */
+#define TA_CMD_GET_RNG_INFO		0x1
+
+#define MAX_ENTROPY_REQ_SZ		(4 * 1024)
+
+static struct tee_context *ctx;
+static struct tee_shm *entropy_shm_pool;
+static u32 ta_rng_data_rate;
+static u32 ta_rng_session_id;
+
+static size_t get_optee_rng_data(void *buf, size_t req_size)
+{
+	u32 ret = 0;
+	u8 *rng_data = NULL;
+	size_t rng_size = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_RNG function of Trusted App */
+	inv_arg.func = TA_CMD_GET_ENTROPY;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+	param[0].u.memref.shm = entropy_shm_pool;
+	param[0].u.memref.size = req_size;
+	param[0].u.memref.shm_offs = 0;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
+		       inv_arg.ret);
+		return 0;
+	}
+
+	rng_data = tee_shm_get_va(entropy_shm_pool, 0);
+	if (IS_ERR(rng_data)) {
+		pr_err("tee_shm_get_va failed\n");
+		return 0;
+	}
+
+	rng_size = param[0].u.memref.size;
+	memcpy(buf, rng_data, rng_size);
+
+	return rng_size;
+}
+
+static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	u8 *data = buf;
+	size_t read = 0, rng_size = 0;
+	int timeout = 1;
+
+	if (max > MAX_ENTROPY_REQ_SZ)
+		max = MAX_ENTROPY_REQ_SZ;
+
+	while (read == 0) {
+		rng_size = get_optee_rng_data(data, (max - read));
+
+		data += rng_size;
+		read += rng_size;
+
+		if (wait) {
+			if (timeout-- == 0)
+				return read;
+			msleep((1000 * (max - read)) / ta_rng_data_rate);
+		} else {
+			return read;
+		}
+	}
+
+	return read;
+}
+
+static int optee_rng_init(struct hwrng *rng)
+{
+	entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
+					 TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+	if (IS_ERR(entropy_shm_pool)) {
+		pr_err("tee_shm_alloc failed\n");
+		return PTR_ERR(entropy_shm_pool);
+	}
+
+	return 0;
+}
+
+static void optee_rng_cleanup(struct hwrng *rng)
+{
+	tee_shm_free(entropy_shm_pool);
+}
+
+static struct hwrng optee_rng = {
+	.name		= DRIVER_NAME,
+	.init		= optee_rng_init,
+	.cleanup	= optee_rng_cleanup,
+	.read		= optee_rng_read,
+};
+
+static int get_optee_rng_info(void)
+{
+	u32 ret = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_RNG function of Trusted App */
+	inv_arg.func = TA_CMD_GET_RNG_INFO;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		pr_err("TA_CMD_GET_RNG_INFO invoke function error: %x\n",
+		       inv_arg.ret);
+		return -EINVAL;
+	}
+
+	ta_rng_data_rate = param[0].u.value.a;
+	optee_rng.quality = param[0].u.value.b;
+
+	return 0;
+}
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+		return 1;
+	else
+		return 0;
+}
+
+static int optee_rng_probe(struct device *dev)
+{
+	struct tee_client_device *rng_device = to_tee_client_device(dev);
+	int ret = 0, err = -ENODEV;
+	struct tee_ioctl_open_session_arg sess_arg = {0};
+
+	/* Open context with TEE driver */
+	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+	if (IS_ERR(ctx))
+		return -ENODEV;
+
+	/* Open session with hwrng Trusted App */
+	memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	ret = tee_client_open_session(ctx, &sess_arg, NULL);
+	if ((ret < 0) || (sess_arg.ret != 0)) {
+		pr_err("tee_client_open_session failed, error: %x\n",
+		       sess_arg.ret);
+		err = -EINVAL;
+		goto out_ctx;
+	}
+	ta_rng_session_id = sess_arg.session;
+
+	err = get_optee_rng_info();
+	if (err)
+		goto out_sess;
+
+	err = hwrng_register(&optee_rng);
+	if (err) {
+		pr_err("registering failed (%d)\n", err);
+		goto out_sess;
+	}
+
+	return 0;
+
+out_sess:
+	tee_client_close_session(ctx, ta_rng_session_id);
+out_ctx:
+	tee_client_close_context(ctx);
+
+	return err;
+}
+
+static int optee_rng_remove(struct device *dev)
+{
+	tee_client_close_session(ctx, ta_rng_session_id);
+	tee_client_close_context(ctx);
+	hwrng_unregister(&optee_rng);
+
+	return 0;
+}
+
+const struct tee_client_device_id optee_rng_id_table[] = {
+	{UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
+		   0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)},
+	{}
+};
+
+static struct tee_client_driver optee_rng_driver = {
+	.id_table	= optee_rng_id_table,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.bus		= &tee_bus_type,
+		.probe		= optee_rng_probe,
+		.remove		= optee_rng_remove,
+	},
+};
+
+static int __init mod_init(void)
+{
+	int rc;
+
+	rc = driver_register(&optee_rng_driver.driver);
+	if (rc)
+		pr_warn("driver registration failed, err: %d", rc);
+
+	return rc;
+}
+
+static void __exit mod_exit(void)
+{
+	driver_unregister(&optee_rng_driver.driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>");
+MODULE_DESCRIPTION("OP-TEE based random number generator driver");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-01-10 12:26 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10 12:24 [PATCH v2 0/4] Introduce TEE bus driver framework Sumit Garg
2019-01-10 12:24 ` Sumit Garg
2019-01-10 12:24 ` [PATCH v2 1/4] tee: add bus driver framework for TEE based devices Sumit Garg
2019-01-10 12:24   ` Sumit Garg
2019-01-10 14:06   ` Daniel Thompson
2019-01-10 14:06     ` Daniel Thompson
2019-01-11  6:41     ` Sumit Garg
2019-01-11  6:41       ` Sumit Garg
2019-01-11  6:41       ` Sumit Garg
2019-01-10 12:24 ` [PATCH v2 2/4] tee: optee: add TEE bus device enumeration support Sumit Garg
2019-01-10 12:24   ` Sumit Garg
2019-01-10 14:18   ` Daniel Thompson
2019-01-10 14:18     ` Daniel Thompson
2019-01-11  7:22     ` Sumit Garg
2019-01-11  7:22       ` Sumit Garg
2019-01-11  7:22       ` Sumit Garg
2019-01-11  9:39       ` Daniel Thompson
2019-01-11  9:39         ` Daniel Thompson
2019-01-11  9:39         ` Daniel Thompson
2019-01-11  9:51         ` Sumit Garg
2019-01-11  9:51           ` Sumit Garg
2019-01-11  9:51           ` Sumit Garg
2019-01-10 12:24 ` [PATCH v2 3/4] tee: add supp_nowait flag in tee_context struct Sumit Garg
2019-01-10 12:24   ` Sumit Garg
2019-01-10 14:23   ` Daniel Thompson
2019-01-10 14:23     ` Daniel Thompson
2019-01-11  7:30     ` Sumit Garg
2019-01-11  7:30       ` Sumit Garg
2019-01-11  7:30       ` Sumit Garg
2019-01-11  9:54       ` Daniel Thompson
2019-01-11  9:54         ` Daniel Thompson
2019-01-11  9:54         ` Daniel Thompson
2019-01-11  9:57         ` Sumit Garg
2019-01-11  9:57           ` Sumit Garg
2019-01-11  9:57           ` Sumit Garg
2019-01-10 12:24 ` Sumit Garg [this message]
2019-01-10 12:24   ` [PATCH v2 4/4] hwrng: add OP-TEE based rng driver Sumit Garg
2019-01-10 13:55   ` [Tee-dev] " Joakim Bech
2019-01-10 13:55     ` Joakim Bech
2019-01-11  6:34     ` Sumit Garg
2019-01-11  6:34       ` Sumit Garg
2019-01-11  6:34       ` Sumit Garg
2019-01-10 14:27   ` Daniel Thompson
2019-01-10 14:27     ` Daniel Thompson
2019-01-11  8:40     ` Sumit Garg
2019-01-11  8:40       ` Sumit Garg
2019-01-11  8:40       ` Sumit Garg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547123097-16431-5-git-send-email-sumit.garg@linaro.org \
    --to=sumit.garg@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bhsharma@redhat.com \
    --cc=daniel.thompson@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=jens.wiklander@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mpm@selenic.com \
    --cc=robh+dt@kernel.org \
    --cc=tee-dev@lists.linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.