[PATCH 01/30] hwmon: (ltc4261) Use permission specific SENSOR[_DEVICE]_ATTR variants

[Guenter Roeck <linux@roeck-us.net>]

Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.

Also replace any remaining S_<PERMS> in the driver with octal values.

The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.

This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/ltc4261.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 0becd69842bb..6eb3415e0639 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -132,7 +132,7 @@ static int ltc4261_get_value(struct ltc4261_data *data, u8 reg)
 	return val;
 }
 
-static ssize_t ltc4261_show_value(struct device *dev,
+static ssize_t ltc4261_value_show(struct device *dev,
 				  struct device_attribute *da, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
@@ -146,7 +146,7 @@ static ssize_t ltc4261_show_value(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%d\n", value);
 }
 
-static ssize_t ltc4261_show_bool(struct device *dev,
+static ssize_t ltc4261_bool_show(struct device *dev,
 				 struct device_attribute *da, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
@@ -166,10 +166,8 @@ static ssize_t ltc4261_show_bool(struct device *dev,
 /*
  * Input voltages.
  */
-static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4261_show_value, NULL,
-			  LTC4261_ADIN_H);
-static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4261_show_value, NULL,
-			  LTC4261_ADIN2_H);
+static SENSOR_DEVICE_ATTR_RO(in1_input, ltc4261_value, LTC4261_ADIN_H);
+static SENSOR_DEVICE_ATTR_RO(in2_input, ltc4261_value, LTC4261_ADIN2_H);
 
 /*
  * Voltage alarms. The chip has only one set of voltage alarm status bits,
@@ -179,22 +177,16 @@ static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4261_show_value, NULL,
  * To ensure that the alarm condition is reported to the user, report it
  * with both voltage sensors.
  */
-static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4261_show_bool, NULL,
-			  FAULT_UV);
-static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4261_show_bool, NULL,
-			  FAULT_OV);
-static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc4261_show_bool, NULL,
-			  FAULT_UV);
-static SENSOR_DEVICE_ATTR(in2_max_alarm, S_IRUGO, ltc4261_show_bool, NULL,
-			  FAULT_OV);
+static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ltc4261_bool, FAULT_UV);
+static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ltc4261_bool, FAULT_OV);
+static SENSOR_DEVICE_ATTR_RO(in2_min_alarm, ltc4261_bool, FAULT_UV);
+static SENSOR_DEVICE_ATTR_RO(in2_max_alarm, ltc4261_bool, FAULT_OV);
 
 /* Currents (via sense resistor) */
-static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4261_show_value, NULL,
-			  LTC4261_SENSE_H);
+static SENSOR_DEVICE_ATTR_RO(curr1_input, ltc4261_value, LTC4261_SENSE_H);
 
 /* Overcurrent alarm */
-static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4261_show_bool, NULL,
-			  FAULT_OC);
+static SENSOR_DEVICE_ATTR_RO(curr1_max_alarm, ltc4261_bool, FAULT_OC);
 
 static struct attribute *ltc4261_attrs[] = {
 	&sensor_dev_attr_in1_input.dev_attr.attr,
-- 
2.7.4