From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> To: jorge.ramirez-ortiz@linaro.org, gregkh@linuxfoundation.org, mark.rutland@arm.com, kishon@ti.com, jackp@codeaurora.org, andy.gross@linaro.org, swboyd@chromium.org Cc: shawn.guo@linaro.org, vkoul@kernel.org, bjorn.andersson@linaro.org, khasim.mohammed@linaro.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404 Date: Tue, 29 Jan 2019 12:35:13 +0100 [thread overview] Message-ID: <1548761715-4004-1-git-send-email-jorge.ramirez-ortiz@linaro.org> (raw) This set adds USB SS PHY support to Qualcomm's QCS404 SoC The PHY is implemented using Synopsys SS PHY 1.0.0 IP The code is losely based on Sriharsha Allenki's <sallenki@codeaurora.org> original implementation. v2: enable OTG mode detection move vdd voltage levels to driver use bulk_ control interfaces ss-phy-bindings [1] [1] ss-phy-binding discussion: - qcom,dwc3-ss-usb-phy exist for a generic usb2/usb3 phy driver that was never merged. Rather than trying to re-use these bindings (or delete them) I propose that we go ahead with the new separate bindings for HS and SS: if not now - investigation in progress- in the future it might be possible to have again a common phy driver for which these old bindings would be the binding agreement. Jorge Ramirez-Ortiz (2): dt-bindings: Add Qualcomm USB Super-Speed PHY bindings phy: qualcomm: usb: Add Super-Speed PHY driver .../devicetree/bindings/usb/qcom,usb-ssphy.txt | 73 +++++ drivers/phy/qualcomm/Kconfig | 11 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-usb-ss.c | 347 +++++++++++++++++++++ 4 files changed, 432 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/qcom,usb-ssphy.txt create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> To: jorge.ramirez-ortiz@linaro.org, gregkh@linuxfoundation.org, mark.rutland@arm.com, kishon@ti.com, jackp@codeaurora.org, andy.gross@linaro.org, swboyd@chromium.org Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, khasim.mohammed@linaro.org, linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org, vkoul@kernel.org, shawn.guo@linaro.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404 Date: Tue, 29 Jan 2019 12:35:13 +0100 [thread overview] Message-ID: <1548761715-4004-1-git-send-email-jorge.ramirez-ortiz@linaro.org> (raw) This set adds USB SS PHY support to Qualcomm's QCS404 SoC The PHY is implemented using Synopsys SS PHY 1.0.0 IP The code is losely based on Sriharsha Allenki's <sallenki@codeaurora.org> original implementation. v2: enable OTG mode detection move vdd voltage levels to driver use bulk_ control interfaces ss-phy-bindings [1] [1] ss-phy-binding discussion: - qcom,dwc3-ss-usb-phy exist for a generic usb2/usb3 phy driver that was never merged. Rather than trying to re-use these bindings (or delete them) I propose that we go ahead with the new separate bindings for HS and SS: if not now - investigation in progress- in the future it might be possible to have again a common phy driver for which these old bindings would be the binding agreement. Jorge Ramirez-Ortiz (2): dt-bindings: Add Qualcomm USB Super-Speed PHY bindings phy: qualcomm: usb: Add Super-Speed PHY driver .../devicetree/bindings/usb/qcom,usb-ssphy.txt | 73 +++++ drivers/phy/qualcomm/Kconfig | 11 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-usb-ss.c | 347 +++++++++++++++++++++ 4 files changed, 432 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/qcom,usb-ssphy.txt create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-01-29 11:35 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-29 11:35 Jorge Ramirez-Ortiz [this message] 2019-01-29 11:35 ` [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404 Jorge Ramirez-Ortiz 2019-01-29 11:35 ` [PATCH v2 1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings Jorge Ramirez-Ortiz 2019-01-29 11:35 ` Jorge Ramirez-Ortiz 2019-01-29 11:35 ` [v2,1/2] " Jorge Ramirez 2019-01-29 20:38 ` [PATCH v2 1/2] " Bjorn Andersson 2019-01-29 20:38 ` Bjorn Andersson 2019-01-29 20:38 ` [v2,1/2] " Bjorn Andersson 2019-01-30 20:02 ` [PATCH v2 1/2] " Rob Herring 2019-01-30 20:02 ` Rob Herring 2019-01-30 20:02 ` [v2,1/2] " Rob Herring 2019-02-05 11:02 ` [PATCH v2 1/2] " Jorge Ramirez 2019-02-05 11:02 ` Jorge Ramirez 2019-02-05 11:02 ` [v2,1/2] " Jorge Ramirez 2019-02-05 11:02 ` [PATCH v2 1/2] " Jorge Ramirez 2019-02-06 14:11 ` Jorge Ramirez 2019-02-06 14:11 ` Jorge Ramirez 2019-02-06 14:11 ` [v2,1/2] " Jorge Ramirez 2019-02-12 20:47 ` [PATCH v2 1/2] " Rob Herring 2019-02-12 20:47 ` Rob Herring 2019-02-12 20:47 ` [v2,1/2] " Rob Herring 2019-02-12 20:47 ` [PATCH v2 1/2] " Rob Herring 2019-01-29 11:35 ` [PATCH v2 2/2] phy: qualcomm: usb: Add Super-Speed PHY driver Jorge Ramirez-Ortiz 2019-01-29 11:35 ` Jorge Ramirez-Ortiz 2019-01-29 11:35 ` [v2,2/2] " Jorge Ramirez 2019-01-29 20:27 ` [PATCH v2 2/2] " Bjorn Andersson 2019-01-29 20:27 ` Bjorn Andersson 2019-01-29 20:27 ` [v2,2/2] " Bjorn Andersson 2019-01-30 9:53 ` [PATCH v2 2/2] " Jorge Ramirez 2019-01-30 9:53 ` Jorge Ramirez 2019-01-30 9:53 ` [v2,2/2] " Jorge Ramirez 2019-01-30 11:38 ` [PATCH v2 2/2] " Jorge Ramirez 2019-01-30 11:38 ` Jorge Ramirez 2019-01-30 11:38 ` [v2,2/2] " Jorge Ramirez 2019-01-30 12:27 ` [PATCH v2 2/2] " Jorge Ramirez 2019-01-30 12:27 ` Jorge Ramirez 2019-01-30 12:27 ` [v2,2/2] " Jorge Ramirez 2019-01-30 19:58 ` [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404 Rob Herring 2019-01-30 19:58 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1548761715-4004-1-git-send-email-jorge.ramirez-ortiz@linaro.org \ --to=jorge.ramirez-ortiz@linaro.org \ --cc=andy.gross@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jackp@codeaurora.org \ --cc=khasim.mohammed@linaro.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=shawn.guo@linaro.org \ --cc=swboyd@chromium.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.