All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <thierry.reding@gmail.com>, <robh+dt@kernel.org>
Cc: <u.kleine-koenig@pengutronix.de>, <tduszyns@gmail.com>,
	<mark.rutland@arm.com>, <alexandre.torgue@st.com>,
	<mcoquelin.stm32@gmail.com>, <fabrice.gasnier@st.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pwm@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH v2 2/3] pwm: stm32-lp: Add power management support
Date: Mon, 11 Feb 2019 17:12:01 +0100	[thread overview]
Message-ID: <1549901522-15071-3-git-send-email-fabrice.gasnier@st.com> (raw)
In-Reply-To: <1549901522-15071-1-git-send-email-fabrice.gasnier@st.com>

Add suspend/resume PM sleep ops. When going to low power, enforce the PWM
channel isn't active. Let the PWM consumers disable it during their own
suspend sequence. Only perform a check here, and handle the pinctrl states.
See [1].
[1] https://lkml.org/lkml/2019/2/5/770

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Changes in v2:
- Don't disable PWM channel: let the PWM user disable it. Refuse to
  suspend in case it's been left enabled.
- Drop the ifdefs, use __maybe_unused instead.
---
 drivers/pwm/pwm-stm32-lp.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 0059b24c..2211a64 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -13,6 +13,7 @@
 #include <linux/mfd/stm32-lptimer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
@@ -223,6 +224,29 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	return pwmchip_remove(&priv->chip);
 }
 
+static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
+{
+	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
+	struct pwm_state state;
+
+	pwm_get_state(&priv->chip.pwms[0], &state);
+	if (state.enabled) {
+		dev_err(dev, "The consumer didn't stop us (%s)\n",
+			priv->chip.pwms[0].label);
+		return -EBUSY;
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
+{
+	return pinctrl_pm_select_default_state(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
+			 stm32_pwm_lp_resume);
+
 static const struct of_device_id stm32_pwm_lp_of_match[] = {
 	{ .compatible = "st,stm32-pwm-lp", },
 	{},
@@ -235,6 +259,7 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	.driver	= {
 		.name = "stm32-pwm-lp",
 		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
+		.pm = &stm32_pwm_lp_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_lp_driver);
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: thierry.reding@gmail.com, robh+dt@kernel.org
Cc: u.kleine-koenig@pengutronix.de, tduszyns@gmail.com,
	mark.rutland@arm.com, alexandre.torgue@st.com,
	mcoquelin.stm32@gmail.com, fabrice.gasnier@st.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH v2 2/3] pwm: stm32-lp: Add power management support
Date: Mon, 11 Feb 2019 17:12:01 +0100	[thread overview]
Message-ID: <1549901522-15071-3-git-send-email-fabrice.gasnier@st.com> (raw)
In-Reply-To: <1549901522-15071-1-git-send-email-fabrice.gasnier@st.com>

Add suspend/resume PM sleep ops. When going to low power, enforce the PWM
channel isn't active. Let the PWM consumers disable it during their own
suspend sequence. Only perform a check here, and handle the pinctrl states.
See [1].
[1] https://lkml.org/lkml/2019/2/5/770

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Changes in v2:
- Don't disable PWM channel: let the PWM user disable it. Refuse to
  suspend in case it's been left enabled.
- Drop the ifdefs, use __maybe_unused instead.
---
 drivers/pwm/pwm-stm32-lp.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 0059b24c..2211a64 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -13,6 +13,7 @@
 #include <linux/mfd/stm32-lptimer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
@@ -223,6 +224,29 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	return pwmchip_remove(&priv->chip);
 }
 
+static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
+{
+	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
+	struct pwm_state state;
+
+	pwm_get_state(&priv->chip.pwms[0], &state);
+	if (state.enabled) {
+		dev_err(dev, "The consumer didn't stop us (%s)\n",
+			priv->chip.pwms[0].label);
+		return -EBUSY;
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
+{
+	return pinctrl_pm_select_default_state(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
+			 stm32_pwm_lp_resume);
+
 static const struct of_device_id stm32_pwm_lp_of_match[] = {
 	{ .compatible = "st,stm32-pwm-lp", },
 	{},
@@ -235,6 +259,7 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	.driver	= {
 		.name = "stm32-pwm-lp",
 		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
+		.pm = &stm32_pwm_lp_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_lp_driver);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <thierry.reding@gmail.com>, <robh+dt@kernel.org>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	alexandre.torgue@st.com, tduszyns@gmail.com,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	mcoquelin.stm32@gmail.com, u.kleine-koenig@pengutronix.de,
	fabrice.gasnier@st.com, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] pwm: stm32-lp: Add power management support
Date: Mon, 11 Feb 2019 17:12:01 +0100	[thread overview]
Message-ID: <1549901522-15071-3-git-send-email-fabrice.gasnier@st.com> (raw)
In-Reply-To: <1549901522-15071-1-git-send-email-fabrice.gasnier@st.com>

Add suspend/resume PM sleep ops. When going to low power, enforce the PWM
channel isn't active. Let the PWM consumers disable it during their own
suspend sequence. Only perform a check here, and handle the pinctrl states.
See [1].
[1] https://lkml.org/lkml/2019/2/5/770

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Changes in v2:
- Don't disable PWM channel: let the PWM user disable it. Refuse to
  suspend in case it's been left enabled.
- Drop the ifdefs, use __maybe_unused instead.
---
 drivers/pwm/pwm-stm32-lp.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 0059b24c..2211a64 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -13,6 +13,7 @@
 #include <linux/mfd/stm32-lptimer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
@@ -223,6 +224,29 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	return pwmchip_remove(&priv->chip);
 }
 
+static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
+{
+	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
+	struct pwm_state state;
+
+	pwm_get_state(&priv->chip.pwms[0], &state);
+	if (state.enabled) {
+		dev_err(dev, "The consumer didn't stop us (%s)\n",
+			priv->chip.pwms[0].label);
+		return -EBUSY;
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
+{
+	return pinctrl_pm_select_default_state(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
+			 stm32_pwm_lp_resume);
+
 static const struct of_device_id stm32_pwm_lp_of_match[] = {
 	{ .compatible = "st,stm32-pwm-lp", },
 	{},
@@ -235,6 +259,7 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 	.driver	= {
 		.name = "stm32-pwm-lp",
 		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
+		.pm = &stm32_pwm_lp_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_lp_driver);
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-11 16:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-11 16:11 [PATCH v2 0/3] Add PM support to STM32 LP Timer drivers Fabrice Gasnier
2019-02-11 16:11 ` Fabrice Gasnier
2019-02-11 16:11 ` Fabrice Gasnier
2019-02-11 16:12 ` [PATCH v2 1/3] dt-bindings: pwm-stm32-lp: document pinctrl sleep state Fabrice Gasnier
2019-02-11 16:12   ` Fabrice Gasnier
2019-02-11 16:12   ` Fabrice Gasnier
2019-02-11 16:12 ` Fabrice Gasnier [this message]
2019-02-11 16:12   ` [PATCH v2 2/3] pwm: stm32-lp: Add power management support Fabrice Gasnier
2019-02-11 16:12   ` Fabrice Gasnier
2019-02-11 16:12 ` [PATCH v2 3/3] pwm: core: add consumer device link Fabrice Gasnier
2019-02-11 16:12   ` Fabrice Gasnier
2019-02-11 16:12   ` Fabrice Gasnier
2019-02-11 19:06   ` Uwe Kleine-König
2019-02-11 19:06     ` Uwe Kleine-König
2019-02-12  8:31     ` Fabrice Gasnier
2019-02-12  8:31       ` Fabrice Gasnier
2019-02-12  9:03       ` Uwe Kleine-König
2019-02-12  9:03         ` Uwe Kleine-König
2019-02-12  9:03         ` Uwe Kleine-König
2019-02-13 10:51         ` Fabrice Gasnier
2019-02-13 10:51           ` Fabrice Gasnier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1549901522-15071-3-git-send-email-fabrice.gasnier@st.com \
    --to=fabrice.gasnier@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tduszyns@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.