All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anson Huang <anson.huang@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	Abel Vesa <abel.vesa@nxp.com>,
	"ccaione@baylibre.com" <ccaione@baylibre.com>,
	"agx@sigxcpu.org" <agx@sigxcpu.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>
Cc: dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH 3/3] arm64: dts: freescale: imx8mq: add clock for GPIO node
Date: Fri, 22 Feb 2019 09:42:33 +0000	[thread overview]
Message-ID: <1550828264-9962-3-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1550828264-9962-1-git-send-email-Anson.Huang@nxp.com>

i.MX8MQ has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4..4c1fca9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -160,6 +160,7 @@
 				reg = <0x30200000 0x10000>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -171,6 +172,7 @@
 				reg = <0x30210000 0x10000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -182,6 +184,7 @@
 				reg = <0x30220000 0x10000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -193,6 +196,7 @@
 				reg = <0x30230000 0x10000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -204,6 +208,7 @@
 				reg = <0x30240000 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <anson.huang@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	Abel Vesa <abel.vesa@nxp.com>,
	"ccaione@baylibre.com" <ccaione@baylibre.com>,
	"agx@sigxcpu.org" <agx@sigxcpu.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH 3/3] arm64: dts: freescale: imx8mq: add clock for GPIO node
Date: Fri, 22 Feb 2019 09:42:33 +0000	[thread overview]
Message-ID: <1550828264-9962-3-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1550828264-9962-1-git-send-email-Anson.Huang@nxp.com>

i.MX8MQ has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4..4c1fca9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -160,6 +160,7 @@
 				reg = <0x30200000 0x10000>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -171,6 +172,7 @@
 				reg = <0x30210000 0x10000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -182,6 +184,7 @@
 				reg = <0x30220000 0x10000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -193,6 +196,7 @@
 				reg = <0x30230000 0x10000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -204,6 +208,7 @@
 				reg = <0x30240000 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <anson.huang@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	Abel Vesa <abel.vesa@nxp.com>,
	"ccaione@baylibre.com" <ccaione@baylibre.com>,
	"agx@sigxcpu.org" <agx@sigxcpu.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>
Cc: dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH 3/3] arm64: dts: freescale: imx8mq: add clock for GPIO node
Date: Fri, 22 Feb 2019 09:42:33 +0000	[thread overview]
Message-ID: <1550828264-9962-3-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1550828264-9962-1-git-send-email-Anson.Huang@nxp.com>

i.MX8MQ has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4..4c1fca9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -160,6 +160,7 @@
 				reg = <0x30200000 0x10000>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -171,6 +172,7 @@
 				reg = <0x30210000 0x10000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -182,6 +184,7 @@
 				reg = <0x30220000 0x10000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -193,6 +196,7 @@
 				reg = <0x30230000 0x10000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -204,6 +208,7 @@
 				reg = <0x30240000 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-22  9:43 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22  9:42 [PATCH 1/3] clk: imx8mq: initialize clock tree earlier Anson Huang
2019-02-22  9:42 ` Anson Huang
2019-02-22  9:42 ` Anson Huang
2019-02-22  9:42 ` [PATCH 2/3] clk: imx8mq: add GPIO clocks to clock tree Anson Huang
2019-02-22  9:42   ` Anson Huang
2019-02-22  9:42   ` Anson Huang
2019-02-22  9:42 ` Anson Huang [this message]
2019-02-22  9:42   ` [PATCH 3/3] arm64: dts: freescale: imx8mq: add clock for GPIO node Anson Huang
2019-02-22  9:42   ` Anson Huang
2019-02-22 10:04 ` [PATCH 1/3] clk: imx8mq: initialize clock tree earlier Aisheng Dong
2019-02-22 10:04   ` Aisheng Dong
2019-02-22 10:04   ` Aisheng Dong
2019-02-22 10:54 ` Lucas Stach
2019-02-22 10:54   ` Lucas Stach
2019-02-22 10:54   ` Lucas Stach
2019-02-23  3:04   ` Anson Huang
2019-02-23  3:04     ` Anson Huang
2019-02-23  3:04     ` Anson Huang
2019-02-23  3:13     ` Anson Huang
2019-02-23  3:13       ` Anson Huang
2019-02-23  3:13       ` Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1550828264-9962-3-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=agx@sigxcpu.org \
    --cc=ccaione@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.