[PATCH v4 3/7] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param

[Stanley Chu <stanley.chu@mediatek.com>]

ufshcd_get_pwr_dev_param function and ufs_dev_params struct
are re-factored to ufs common driver thus change the way this
driver used.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
---
 drivers/scsi/ufs/ufs-hisi.c | 109 ++----------------------------------
 1 file changed, 4 insertions(+), 105 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 452e19f8fb47..01faad26ec26 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -272,108 +272,7 @@ static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
 	return err;
 }
 
-struct ufs_hisi_dev_params {
-	u32 pwm_rx_gear; /* pwm rx gear to work in */
-	u32 pwm_tx_gear; /* pwm tx gear to work in */
-	u32 hs_rx_gear;  /* hs rx gear to work in */
-	u32 hs_tx_gear;  /* hs tx gear to work in */
-	u32 rx_lanes;    /* number of rx lanes */
-	u32 tx_lanes;    /* number of tx lanes */
-	u32 rx_pwr_pwm;  /* rx pwm working pwr */
-	u32 tx_pwr_pwm;  /* tx pwm working pwr */
-	u32 rx_pwr_hs;   /* rx hs working pwr */
-	u32 tx_pwr_hs;   /* tx hs working pwr */
-	u32 hs_rate;     /* rate A/B to work in HS */
-	u32 desired_working_mode;
-};
-
-static int ufs_hisi_get_pwr_dev_param(
-				    struct ufs_hisi_dev_params *hisi_param,
-				    struct ufs_pa_layer_attr *dev_max,
-				    struct ufs_pa_layer_attr *agreed_pwr)
-{
-	int min_hisi_gear;
-	int min_dev_gear;
-	bool is_dev_sup_hs = false;
-	bool is_hisi_max_hs = false;
-
-	if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
-		is_dev_sup_hs = true;
-
-	if (hisi_param->desired_working_mode == FAST) {
-		is_hisi_max_hs = true;
-		min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
-				       hisi_param->hs_tx_gear);
-	} else {
-		min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
-				       hisi_param->pwm_tx_gear);
-	}
-
-	/*
-	 * device doesn't support HS but
-	 * hisi_param->desired_working_mode is HS,
-	 * thus device and hisi_param don't agree
-	 */
-	if (!is_dev_sup_hs && is_hisi_max_hs) {
-		pr_err("%s: device not support HS\n", __func__);
-		return -ENOTSUPP;
-	} else if (is_dev_sup_hs && is_hisi_max_hs) {
-		/*
-		 * since device supports HS, it supports FAST_MODE.
-		 * since hisi_param->desired_working_mode is also HS
-		 * then final decision (FAST/FASTAUTO) is done according
-		 * to hisi_params as it is the restricting factor
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-			hisi_param->rx_pwr_hs;
-	} else {
-		/*
-		 * here hisi_param->desired_working_mode is PWM.
-		 * it doesn't matter whether device supports HS or PWM,
-		 * in both cases hisi_param->desired_working_mode will
-		 * determine the mode
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-			hisi_param->rx_pwr_pwm;
-	}
-
-	/*
-	 * we would like tx to work in the minimum number of lanes
-	 * between device capability and vendor preferences.
-	 * the same decision will be made for rx
-	 */
-	agreed_pwr->lane_tx =
-		min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
-	agreed_pwr->lane_rx =
-		min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
-
-	/* device maximum gear is the minimum between device rx and tx gears */
-	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
-
-	/*
-	 * if both device capabilities and vendor pre-defined preferences are
-	 * both HS or both PWM then set the minimum gear to be the chosen
-	 * working gear.
-	 * if one is PWM and one is HS then the one that is PWM get to decide
-	 * what is the gear, as it is the one that also decided previously what
-	 * pwr the device will be configured to.
-	 */
-	if ((is_dev_sup_hs && is_hisi_max_hs) ||
-	    (!is_dev_sup_hs && !is_hisi_max_hs))
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
-			min_t(u32, min_dev_gear, min_hisi_gear);
-	else
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
-
-	agreed_pwr->hs_rate = hisi_param->hs_rate;
-
-	pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
-		agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
-		agreed_pwr->hs_rate);
-	return 0;
-}
-
-static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param)
 {
 	hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
 	hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
@@ -434,7 +333,7 @@ static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
 				       struct ufs_pa_layer_attr *dev_max_params,
 				       struct ufs_pa_layer_attr *dev_req_params)
 {
-	struct ufs_hisi_dev_params ufs_hisi_cap;
+	struct ufs_dev_params ufs_hisi_cap;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -447,8 +346,8 @@ static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
 	switch (status) {
 	case PRE_CHANGE:
 		ufs_hisi_set_dev_cap(&ufs_hisi_cap);
-		ret = ufs_hisi_get_pwr_dev_param(
-			&ufs_hisi_cap, dev_max_params, dev_req_params);
+		ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap,
+					       dev_max_params, dev_req_params);
 		if (ret) {
 			dev_err(hba->dev,
 			    "%s: failed to determine capabilities\n", __func__);
-- 
2.18.0