All of lore.kernel.org
 help / color / mirror / Atom feed
From: Harish Bandi <c-hbandi@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
	anubhavg@codeaurora.org, devicetree@vger.kernel.org,
	mark.rutland@arm.com, obh+dt@kernel.org,
	Harish Bandi <c-hbandi@codeaurora.org>
Subject: [PATCH v4 1/2] Bluetooth: hci_qca: Added support for WCN3998
Date: Mon, 25 Mar 2019 17:01:30 +0530	[thread overview]
Message-ID: <1553513491-25763-2-git-send-email-c-hbandi@codeaurora.org> (raw)
In-Reply-To: <1553513491-25763-1-git-send-email-c-hbandi@codeaurora.org>

Added new compatible for WCN3998 and corresponding voltage
and current values to WCN3998 compatible.
Changed driver code to support WCN3998

Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
---
Changes in V4:
- Added is_qca_soc_type_wcn399x_family helper function 
- to get the soc type is wcn399x or not.
---
 drivers/bluetooth/btqca.c   |  4 ++--
 drivers/bluetooth/btqca.h   |  3 ++-
 drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++-------------
 3 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 6122685..70cab13 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
-	if (soc_type == QCA_WCN3990) {
+	if (soc_type >= QCA_WCN3990) {
 		/* Firmware files to download are based on ROM version.
 		 * ROM version is derived from last two bytes of soc_ver.
 		 */
@@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
-	if (soc_type == QCA_WCN3990)
+	if (soc_type >= QCA_WCN3990)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
 	else
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index c72c56e..bd6a902 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -132,7 +132,8 @@ enum qca_btsoc_type {
 	QCA_INVALID = -1,
 	QCA_AR3002,
 	QCA_ROME,
-	QCA_WCN3990
+	QCA_WCN3990,
+	QCA_WCN3998,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4ea995d..e238c2b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -189,6 +189,14 @@ static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
 	return soc_type;
 }
 
+bool is_qca_soc_type_wcn399x_family(enum qca_btsoc_type soc_type)
+{
+	if ((soc_type  == QCA_WCN3990) || (soc_type  == QCA_WCN3998))
+		return true;
+
+	return false;
+}
+
 static void __serial_clock_on(struct tty_struct *tty)
 {
 	/* TODO: Some chipset requires to enable UART clock on client
@@ -521,7 +529,7 @@ static int qca_open(struct hci_uart *hu)
 	if (hu->serdev) {
 
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type != QCA_WCN3990) {
+		if (!is_qca_soc_type_wcn399x_family(qcadev->btsoc_type)) {
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
 		} else {
 			hu->init_speed = qcadev->init_speed;
@@ -627,7 +635,7 @@ static int qca_close(struct hci_uart *hu)
 
 	if (hu->serdev) {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (is_qca_soc_type_wcn399x_family(qcadev->btsoc_type))
 			qca_power_shutdown(hu);
 		else
 			gpiod_set_value_cansleep(qcadev->bt_en, 0);
@@ -1008,7 +1016,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
 
 	/* Give the controller time to process the request */
-	if (qca_soc_type(hu) == QCA_WCN3990)
+	if (is_qca_soc_type_wcn399x_family(qca_soc_type(hu)))
 		msleep(10);
 	else
 		msleep(300);
@@ -1084,7 +1092,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 
 static int qca_check_speeds(struct hci_uart *hu)
 {
-	if (qca_soc_type(hu) == QCA_WCN3990) {
+	if (is_qca_soc_type_wcn399x_family(qca_soc_type(hu)) >= QCA_WCN3990) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1116,7 +1124,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		/* Disable flow control for wcn3990 to deassert RTS while
 		 * changing the baudrate of chip and host.
 		 */
-		if (soc_type == QCA_WCN3990)
+		if (is_qca_soc_type_wcn399x_family(soc_type))
 			hci_uart_set_flow_control(hu, true);
 
 		qca_baudrate = qca_get_baudrate_value(speed);
@@ -1128,7 +1136,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		host_set_baudrate(hu, speed);
 
 error:
-		if (soc_type == QCA_WCN3990)
+		if (is_qca_soc_type_wcn399x_family(soc_type))
 			hci_uart_set_flow_control(hu, false);
 	}
 
@@ -1201,7 +1209,7 @@ static int qca_setup(struct hci_uart *hu)
 	/* Patch downloading has to be done without IBS mode */
 	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 
-	if (soc_type == QCA_WCN3990) {
+	if (is_qca_soc_type_wcn399x_family(soc_type)) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
 		/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1232,7 +1240,7 @@ static int qca_setup(struct hci_uart *hu)
 		qca_baudrate = qca_get_baudrate_value(speed);
 	}
 
-	if (soc_type != QCA_WCN3990) {
+	if (!is_qca_soc_type_wcn399x_family(soc_type)) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &soc_ver);
 		if (ret)
@@ -1257,7 +1265,7 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	if (soc_type == QCA_WCN3990)
+	if (is_qca_soc_type_wcn399x_family(soc_type))
 		hu->hdev->set_bdaddr = qca_set_bdaddr;
 	else
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
@@ -1280,7 +1288,7 @@ static int qca_setup(struct hci_uart *hu)
 	.dequeue	= qca_dequeue,
 };
 
-static const struct qca_vreg_data qca_soc_data = {
+static const struct qca_vreg_data qca_soc_data_wcn3990 = {
 	.soc_type = QCA_WCN3990,
 	.vregs = (struct qca_vreg []) {
 		{ "vddio",   1800000, 1900000,  15000  },
@@ -1291,6 +1299,17 @@ static int qca_setup(struct hci_uart *hu)
 	.num_vregs = 4,
 };
 
+static const struct qca_vreg_data qca_soc_data_wcn3998 = {
+	.soc_type = QCA_WCN3998,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio",   1800000, 1900000,  10000  },
+		{ "vddxo",   1800000, 1900000,  80000  },
+		{ "vddrf",   1300000, 1352000,  300000 },
+		{ "vddch0",  3300000, 3300000,  450000 },
+	},
+	.num_vregs = 4,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_data *qca = hu->priv;
@@ -1424,8 +1443,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	qcadev->serdev_hu.serdev = serdev;
 	data = of_device_get_match_data(&serdev->dev);
 	serdev_device_set_drvdata(serdev, qcadev);
-	if (data && data->soc_type == QCA_WCN3990) {
-		qcadev->btsoc_type = QCA_WCN3990;
+	if (data && is_qca_soc_type_wcn399x_family(data->soc_type)) {
+		qcadev->btsoc_type = data->soc_type;
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -1489,7 +1508,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 {
 	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
 
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (qcadev->btsoc_type >= QCA_WCN3990)
 		qca_power_shutdown(&qcadev->serdev_hu);
 	else
 		clk_disable_unprepare(qcadev->susclk);
@@ -1499,7 +1518,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 
 static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,qca6174-bt" },
-	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
+	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
+	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2019-03-25 11:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25 11:31 [PATCH v4 0/2] Enable Bluetooth functionality for WCN3998 Harish Bandi
2019-03-25 11:31 ` Harish Bandi [this message]
2019-03-25 11:49   ` [PATCH v4 1/2] Bluetooth: hci_qca: Added support " Marc Gonzalez
2019-03-25 11:31 ` [PATCH v4 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998 Harish Bandi
2019-03-25 11:48   ` Marcel Holtmann
2019-03-25 11:36 [PATCH v4 0/2] Enable Bluetooth functionality for WCN3998 Harish Bandi
2019-03-25 11:36 ` [PATCH v4 1/2] Bluetooth: hci_qca: Added support " Harish Bandi
2019-03-25 16:21   ` Matthias Kaehlcke
2019-03-26  9:53     ` c-hbandi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553513491-25763-2-git-send-email-c-hbandi@codeaurora.org \
    --to=c-hbandi@codeaurora.org \
    --cc=anubhavg@codeaurora.org \
    --cc=bgodavar@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mark.rutland@arm.com \
    --cc=mka@chromium.org \
    --cc=obh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.