From: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> To: peter_hong@fintek.com.tw, johan@kernel.org, gregkh@linuxfoundation.org Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, "Ji-Ze Hong (Peter Hong)" <hpeter+linux_kernel@gmail.com> Subject: [PATCH V7 4/4] USB: serial: f81232: implement break control Date: Tue, 16 Apr 2019 16:27:05 +0800 [thread overview] Message-ID: <1555403225-3430-4-git-send-email-hpeter+linux_kernel@gmail.com> (raw) In-Reply-To: <1555403225-3430-1-git-send-email-hpeter+linux_kernel@gmail.com> Implement Fintek F81232 break on/off with LCR register. It's the same with 16550A LCR register layout. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> --- v7: 1: no change v6: 1: no change v5: 1: no change v4: 1: no change v3: 1: using shadow_lcr to save LCR in f81232_break_ctl() drivers/usb/serial/f81232.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 474834ddbb89..839163ef0040 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -65,6 +65,7 @@ struct f81232_private { struct mutex lock; u8 modem_control; u8 modem_status; + u8 shadow_lcr; bool is_port_open; speed_t baud_base; struct work_struct lsr_work; @@ -378,13 +379,23 @@ static void f81232_process_read_urb(struct urb *urb) static void f81232_break_ctl(struct tty_struct *tty, int break_state) { - /* FIXME - Stubbed out for now */ + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *priv = usb_get_serial_port_data(port); + int status; - /* - * break_state = -1 to turn on break, and 0 to turn off break - * see drivers/char/tty_io.c to see it used. - * last_set_data_urb_value NEVER has the break bit set in it. - */ + mutex_lock(&priv->lock); + + if (break_state) + priv->shadow_lcr |= UART_LCR_SBC; + else + priv->shadow_lcr &= ~UART_LCR_SBC; + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + priv->shadow_lcr); + if (status) + dev_err(&port->dev, "set break failed: %d\n", status); + + mutex_unlock(&priv->lock); } static int f81232_find_clk(speed_t baudrate) @@ -520,6 +531,7 @@ static int f81232_port_disable(struct usb_serial_port *port) static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct f81232_private *priv = usb_get_serial_port_data(port); u8 new_lcr = 0; int status = 0; speed_t baudrate; @@ -573,11 +585,16 @@ static void f81232_set_termios(struct tty_struct *tty, break; } + mutex_lock(&priv->lock); + + new_lcr |= (priv->shadow_lcr & UART_LCR_SBC); status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); if (status) { dev_err(&port->dev, "%s failed to set LCR: %d\n", __func__, status); } + + mutex_unlock(&priv->lock); } static int f81232_tiocmget(struct tty_struct *tty) -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: "Ji-Ze Hong \(Peter Hong\)" <hpeter@gmail.com> To: peter_hong@fintek.com.tw, johan@kernel.org, gregkh@linuxfoundation.org Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, "Ji-Ze Hong \(Peter Hong\)" <hpeter+linux_kernel@gmail.com> Subject: [V7,4/4] USB: serial: f81232: implement break control Date: Tue, 16 Apr 2019 16:27:05 +0800 [thread overview] Message-ID: <1555403225-3430-4-git-send-email-hpeter+linux_kernel@gmail.com> (raw) Implement Fintek F81232 break on/off with LCR register. It's the same with 16550A LCR register layout. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> --- v7: 1: no change v6: 1: no change v5: 1: no change v4: 1: no change v3: 1: using shadow_lcr to save LCR in f81232_break_ctl() drivers/usb/serial/f81232.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 474834ddbb89..839163ef0040 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -65,6 +65,7 @@ struct f81232_private { struct mutex lock; u8 modem_control; u8 modem_status; + u8 shadow_lcr; bool is_port_open; speed_t baud_base; struct work_struct lsr_work; @@ -378,13 +379,23 @@ static void f81232_process_read_urb(struct urb *urb) static void f81232_break_ctl(struct tty_struct *tty, int break_state) { - /* FIXME - Stubbed out for now */ + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *priv = usb_get_serial_port_data(port); + int status; - /* - * break_state = -1 to turn on break, and 0 to turn off break - * see drivers/char/tty_io.c to see it used. - * last_set_data_urb_value NEVER has the break bit set in it. - */ + mutex_lock(&priv->lock); + + if (break_state) + priv->shadow_lcr |= UART_LCR_SBC; + else + priv->shadow_lcr &= ~UART_LCR_SBC; + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + priv->shadow_lcr); + if (status) + dev_err(&port->dev, "set break failed: %d\n", status); + + mutex_unlock(&priv->lock); } static int f81232_find_clk(speed_t baudrate) @@ -520,6 +531,7 @@ static int f81232_port_disable(struct usb_serial_port *port) static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct f81232_private *priv = usb_get_serial_port_data(port); u8 new_lcr = 0; int status = 0; speed_t baudrate; @@ -573,11 +585,16 @@ static void f81232_set_termios(struct tty_struct *tty, break; } + mutex_lock(&priv->lock); + + new_lcr |= (priv->shadow_lcr & UART_LCR_SBC); status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); if (status) { dev_err(&port->dev, "%s failed to set LCR: %d\n", __func__, status); } + + mutex_unlock(&priv->lock); } static int f81232_tiocmget(struct tty_struct *tty)
next prev parent reply other threads:[~2019-04-16 8:27 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-16 8:27 [PATCH V7 1/4] USB: serial: f81232: clear overrun flag Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` [V7,1/4] " Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` [PATCH V7 2/4] USB: serial: f81232: fix interrupt worker not stop Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` [V7,2/4] " Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` [PATCH V7 3/4] USB: serial: f81232: add high baud rate support Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` [V7,3/4] " Ji-Ze Hong (Peter Hong) 2019-04-16 8:27 ` Ji-Ze Hong (Peter Hong) [this message] 2019-04-16 8:27 ` [V7,4/4] USB: serial: f81232: implement break control Ji-Ze Hong (Peter Hong)
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1555403225-3430-4-git-send-email-hpeter+linux_kernel@gmail.com \ --to=hpeter@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=hpeter+linux_kernel@gmail.com \ --cc=johan@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=peter_hong@fintek.com.tw \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.