All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Biju Das <biju.das@bp.renesas.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Felipe Balbi <balbi@kernel.org>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	Simon Horman <horms@verge.net.au>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH V5 3/9] dt-bindings: usb: hd3ss3220 device tree binding document
Date: Wed, 24 Apr 2019 10:22:17 +0100	[thread overview]
Message-ID: <1556097743-12717-4-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1556097743-12717-1-git-send-email-biju.das@bp.renesas.com>

Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V4-->V5
  * No Change.
V3-->V4
  * No Change.
V2-->V3
  * Added Rob's Reviewed by tag.
V1-->V2
  * Added connector node.
  * updated the example with connector node.
---
 .../devicetree/bindings/usb/ti,hd3ss3220.txt       | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..7f41400
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,37 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: <a b> where a is the interrupt number and b represents an
+   encoding of the sense and level information for the interrupt.
+
+Required sub-node:
+ - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
+   bindings of the connector node are specified in:
+
+	Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+	compatible = "ti,hd3ss3220";
+	reg = <0x47>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+	};
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hd3ss3220_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb3peri_role_switch>;
+		};
+	};
+};
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Biju Das <biju.das@bp.renesas.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Felipe Balbi <balbi@kernel.org>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	Simon Horman <horms@verge.net.au>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org
Subject: [V5,3/9] dt-bindings: usb: hd3ss3220 device tree binding document
Date: Wed, 24 Apr 2019 10:22:17 +0100	[thread overview]
Message-ID: <1556097743-12717-4-git-send-email-biju.das@bp.renesas.com> (raw)

Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V4-->V5
  * No Change.
V3-->V4
  * No Change.
V2-->V3
  * Added Rob's Reviewed by tag.
V1-->V2
  * Added connector node.
  * updated the example with connector node.
---
 .../devicetree/bindings/usb/ti,hd3ss3220.txt       | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..7f41400
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,37 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: <a b> where a is the interrupt number and b represents an
+   encoding of the sense and level information for the interrupt.
+
+Required sub-node:
+ - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
+   bindings of the connector node are specified in:
+
+	Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+	compatible = "ti,hd3ss3220";
+	reg = <0x47>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+	};
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hd3ss3220_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb3peri_role_switch>;
+		};
+	};
+};

  parent reply	other threads:[~2019-04-24  9:22 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
2019-04-24  9:22 ` [PATCH V5 1/9] usb: roles: Introduce stubs for the exiting functions in role.h Biju Das
2019-04-24  9:22   ` [V5,1/9] " Biju Das
2019-04-24  9:22 ` [PATCH V5 2/9] usb: roles: add API to get usb_role_switch by node Biju Das
2019-04-24  9:22   ` Biju Das
2019-04-24  9:22   ` Biju Das
2019-04-24  9:22   ` [V5,2/9] " Biju Das
2019-04-24  9:22 ` Biju Das [this message]
2019-04-24  9:22   ` [V5,3/9] dt-bindings: usb: hd3ss3220 device tree binding document Biju Das
2019-04-24  9:22 ` [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property Biju Das
2019-04-24  9:22   ` [V5,4/9] " Biju Das
2019-04-26 18:14   ` [PATCH V5 4/9] " Rob Herring
2019-04-26 18:14     ` [V5,4/9] " Rob Herring
2019-04-29  9:39     ` [PATCH V5 4/9] " Biju Das
2019-04-29  9:39       ` [V5,4/9] " Biju Das
2019-04-29  9:39       ` [PATCH V5 4/9] " Biju Das
2019-05-03  6:39       ` Biju Das
2019-05-03  6:39         ` [V5,4/9] " Biju Das
2019-05-03  6:39         ` [PATCH V5 4/9] " Biju Das
2019-04-24  9:22 ` [PATCH V5 5/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller Biju Das
2019-04-24  9:22   ` [V5,5/9] " Biju Das
2019-04-24  9:22 ` [PATCH V5 6/9] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework Biju Das
2019-04-24  9:22   ` [V5,6/9] " Biju Das
2019-04-24  9:22 ` [PATCH V5 7/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option Biju Das
2019-04-24  9:22   ` Biju Das
2019-04-24  9:22 ` [PATCH V5 8/9] arm64: dts: renesas: r8a774c0-cat874: Enable USB3.0 host/peripheral device node Biju Das
2019-04-24  9:22 ` [PATCH V5 9/9] arm64: dts: renesas: r8a774c0-cat874: Enable usb role switch support Biju Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556097743-12717-4-git-send-email-biju.das@bp.renesas.com \
    --to=biju.das@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrizio.castro@bp.renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=horms@verge.net.au \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.