From: fabrizio.castro@bp.renesas.com (Fabrizio Castro)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y 10/29] media: rcar: rcar-csi2: Update V3M/E3 PHTW tables
Date: Wed, 1 May 2019 11:22:04 +0100 [thread overview]
Message-ID: <1556706143-11898-11-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1556706143-11898-1-git-send-email-fabrizio.castro@bp.renesas.com>
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
commit 10c08812fe60ddfd480730a58bb78616262d659a upstream.
Update PHTW tables for V3M and E3 SoCs to the latest datasheet release
(R-Car Series, 3rd Generation manual rev1.00 20181017).
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++++---------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 499730f..631f91f 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = {
};
static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
- { .mbps = 80, .reg = 0x00 },
- { .mbps = 90, .reg = 0x20 },
- { .mbps = 100, .reg = 0x40 },
- { .mbps = 110, .reg = 0x02 },
- { .mbps = 130, .reg = 0x22 },
- { .mbps = 140, .reg = 0x42 },
- { .mbps = 150, .reg = 0x04 },
- { .mbps = 170, .reg = 0x24 },
- { .mbps = 180, .reg = 0x44 },
- { .mbps = 200, .reg = 0x06 },
- { .mbps = 220, .reg = 0x26 },
- { .mbps = 240, .reg = 0x46 },
- { .mbps = 250, .reg = 0x08 },
- { .mbps = 270, .reg = 0x28 },
- { .mbps = 300, .reg = 0x0a },
- { .mbps = 330, .reg = 0x2a },
- { .mbps = 360, .reg = 0x4a },
- { .mbps = 400, .reg = 0x0c },
- { .mbps = 450, .reg = 0x2c },
- { .mbps = 500, .reg = 0x0e },
- { .mbps = 550, .reg = 0x2e },
- { .mbps = 600, .reg = 0x10 },
- { .mbps = 650, .reg = 0x30 },
- { .mbps = 700, .reg = 0x12 },
- { .mbps = 750, .reg = 0x32 },
- { .mbps = 800, .reg = 0x52 },
- { .mbps = 850, .reg = 0x72 },
- { .mbps = 900, .reg = 0x14 },
- { .mbps = 950, .reg = 0x34 },
- { .mbps = 1000, .reg = 0x54 },
- { .mbps = 1050, .reg = 0x74 },
+ { .mbps = 89, .reg = 0x00 },
+ { .mbps = 99, .reg = 0x20 },
+ { .mbps = 109, .reg = 0x40 },
+ { .mbps = 129, .reg = 0x02 },
+ { .mbps = 139, .reg = 0x22 },
+ { .mbps = 149, .reg = 0x42 },
+ { .mbps = 169, .reg = 0x04 },
+ { .mbps = 179, .reg = 0x24 },
+ { .mbps = 199, .reg = 0x44 },
+ { .mbps = 219, .reg = 0x06 },
+ { .mbps = 239, .reg = 0x26 },
+ { .mbps = 249, .reg = 0x46 },
+ { .mbps = 269, .reg = 0x08 },
+ { .mbps = 299, .reg = 0x28 },
+ { .mbps = 329, .reg = 0x0a },
+ { .mbps = 359, .reg = 0x2a },
+ { .mbps = 399, .reg = 0x4a },
+ { .mbps = 449, .reg = 0x0c },
+ { .mbps = 499, .reg = 0x2c },
+ { .mbps = 549, .reg = 0x0e },
+ { .mbps = 599, .reg = 0x2e },
+ { .mbps = 649, .reg = 0x10 },
+ { .mbps = 699, .reg = 0x30 },
+ { .mbps = 749, .reg = 0x12 },
+ { .mbps = 799, .reg = 0x32 },
+ { .mbps = 849, .reg = 0x52 },
+ { .mbps = 899, .reg = 0x72 },
+ { .mbps = 949, .reg = 0x14 },
+ { .mbps = 999, .reg = 0x34 },
+ { .mbps = 1049, .reg = 0x54 },
+ { .mbps = 1099, .reg = 0x74 },
{ .mbps = 1125, .reg = 0x16 },
{ /* sentinel */ },
};
--
2.7.4
next prev parent reply other threads:[~2019-05-01 10:22 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-01 10:21 [cip-dev] [PATCH 4.19.y 00/29] Add further support for the RZ/G2M Fabrizio Castro
2019-05-01 10:21 ` [cip-dev] [PATCH 4.19.y 01/29] iommu/ipmmu-vmsa: Hook up R8A774A1 DT maching code Fabrizio Castro
2019-05-01 10:21 ` [cip-dev] [PATCH 4.19.y 02/29] iommu/ipmmu-vmsa: Modify ipmmu_slave_whitelist() to check SoC revisions Fabrizio Castro
2019-05-02 21:27 ` Pavel Machek
2019-05-03 9:34 ` Fabrizio Castro
2019-05-07 2:11 ` Nobuhiro Iwamatsu
2019-05-01 10:21 ` [cip-dev] [PATCH 4.19.y 03/29] iommu/ipmmu-vmsa: Hook up r8a774c0 DT matching code Fabrizio Castro
2019-05-01 10:21 ` [cip-dev] [PATCH 4.19.y 04/29] dt-bindings: iommu: ipmmu-vmsa: Add r8a774a1 support Fabrizio Castro
2019-05-01 10:21 ` [cip-dev] [PATCH 4.19.y 05/29] dt-bindings: iommu: ipmmu-vmsa: Add r8a774c0 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 06/29] arm64: dts: renesas: r8a774c0: Add IPMMU device nodes Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 07/29] media: rcar-vin: Add support for R-Car R8A77990 Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 08/29] media: rcar-vin: Add support for RZ/G2E Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 09/29] media: rcar-csi2: Add R8A77990 support Fabrizio Castro
2019-05-01 10:22 ` Fabrizio Castro [this message]
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 11/29] media: rcar-csi2: Handle per-SoC number of channels Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 12/29] media: rcar-csi2: Fix PHTW table values for E3/V3M Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 13/29] media: rcar-csi2: Add support for RZ/G2E Fabrizio Castro
2019-05-02 21:29 ` Pavel Machek
2019-05-03 9:40 ` Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 14/29] media: dt-bindings: rcar-vin: Add R8A774C0 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 15/29] media: dt-bindings: rcar-csi2: Add r8a774c0 Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 16/29] arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 17/29] ASoC: rsnd: Add r8a774a1 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 18/29] ASoC: rsnd: Add r8a774c0 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 19/29] arm64: dts: renesas: r8a774c0: Add audio support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 20/29] dt-bindings: pwm: rcar: Add r8a774a1 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 21/29] dt-bindings: pwm: rcar: Add r8a774c0 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 22/29] arm64: dts: renesas: r8a774c0: Add PWM support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 23/29] arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 24/29] arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB " Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 25/29] arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC " Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 26/29] thermal: rcar_thermal: add R8A774C0 support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 27/29] dt-bindings: thermal: rcar-thermal: " Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 28/29] arm64: dts: renesas: r8a774c0: Add thermal support Fabrizio Castro
2019-05-01 10:22 ` [cip-dev] [PATCH 4.19.y 29/29] arm64: defconfig: Enable R-Car thermal driver Fabrizio Castro
2019-05-02 21:34 ` Pavel Machek
2019-05-03 10:25 ` Fabrizio Castro
2019-05-01 20:48 ` [cip-dev] [PATCH 4.19.y 00/29] Add further support for the RZ/G2M Pavel Machek
2019-05-02 21:32 ` Pavel Machek
2019-05-07 1:44 ` nobuhiro1.iwamatsu at toshiba.co.jp
2019-05-07 9:14 ` Chris Paterson
2019-05-07 14:38 ` Fabrizio Castro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556706143-11898-11-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.