All of lore.kernel.org
 help / color / mirror / Atom feed
From: michael.kao <michael.kao@mediatek.com>
To: Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	hsinyi@chromium.org
Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"michael.kao" <michael.kao@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node
Date: Fri, 10 May 2019 21:26:59 +0800	[thread overview]
Message-ID: <1557494826-6044-2-git-send-email-michael.kao@mediatek.com> (raw)
In-Reply-To: <1557494826-6044-1-git-send-email-michael.kao@mediatek.com>

Add thermal zone node to Mediatek MT8183 dts file.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 926df75..52ad47e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -334,6 +334,88 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt8183-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>,
+				 <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			mediatek,hw-reset-temp = <117000>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu_thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <1000>;
+				thermal-sensors = <&thermal 0>;
+				sustainable-power = <1500>;
+			};
+
+			/* The tzts1 ~ tzts6 don't need to polling */
+			/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+			tzts1: tzts1 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 1>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts2: tzts2 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 2>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts3: tzts3 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 3>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts4: tzts4 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 4>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts5: tzts5 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 5>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tztsABB: tztsABB {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 6>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -368,6 +450,9 @@
 			compatible = "mediatek,mt8183-efuse",
 				     "mediatek,efuse";
 			reg = <0 0x11f10000 0 0x1000>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
 		};
 
 		mfgcfg: syscon@13000000 {
-- 
2.6.4

WARNING: multiple messages have this Message-ID (diff)
From: michael.kao <michael.kao@mediatek.com>
To: Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	 Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>, <hsinyi@chromium.org>
Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"michael.kao" <michael.kao@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node
Date: Fri, 10 May 2019 21:26:59 +0800	[thread overview]
Message-ID: <1557494826-6044-2-git-send-email-michael.kao@mediatek.com> (raw)
In-Reply-To: <1557494826-6044-1-git-send-email-michael.kao@mediatek.com>

Add thermal zone node to Mediatek MT8183 dts file.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 926df75..52ad47e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -334,6 +334,88 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt8183-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>,
+				 <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			mediatek,hw-reset-temp = <117000>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu_thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <1000>;
+				thermal-sensors = <&thermal 0>;
+				sustainable-power = <1500>;
+			};
+
+			/* The tzts1 ~ tzts6 don't need to polling */
+			/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+			tzts1: tzts1 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 1>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts2: tzts2 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 2>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts3: tzts3 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 3>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts4: tzts4 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 4>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts5: tzts5 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 5>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tztsABB: tztsABB {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 6>;
+				sustainable-power = <0>;
+				trips {};
+				cooling-maps {};
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -368,6 +450,9 @@
 			compatible = "mediatek,mt8183-efuse",
 				     "mediatek,efuse";
 			reg = <0 0x11f10000 0 0x1000>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
 		};
 
 		mfgcfg: syscon@13000000 {
-- 
2.6.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-05-10 13:26 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 13:26 [PATCH v2 0/8] Add Mediatek thermal dirver and dtsi michael.kao
2019-05-10 13:26 ` michael.kao
2019-05-10 13:26 ` michael.kao [this message]
2019-05-10 13:26   ` [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node michael.kao
2019-05-30  6:27   ` Hsin-Yi Wang
2019-05-30  6:27     ` Hsin-Yi Wang
2019-05-30  6:27     ` Hsin-Yi Wang
2019-05-30 16:08     ` Matthias Kaehlcke
2019-05-30 16:08       ` Matthias Kaehlcke
2019-05-30 16:08       ` Matthias Kaehlcke
2019-12-06  9:46       ` Michael Kao (高振翔)
     [not found] ` <1557494826-6044-1-git-send-email-michael.kao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-05-10 13:27   ` [PATCH v2 2/8] arm64: dts: mt8183: add/update dynamic power coefficients michael.kao
2019-05-10 13:27     ` michael.kao
2019-05-10 13:27   ` [PATCH v2 4/8] arm64: dts: mt8183: Configure CPU cooling michael.kao
2019-05-10 13:27     ` michael.kao
2019-05-10 13:27   ` [PATCH v2 5/8] arm64: dts: mt8183: Increase polling frequency for CPU thermal zone michael.kao
2019-05-10 13:27     ` michael.kao
2019-05-10 13:27   ` [PATCH v2 6/8] thermal: mediatek: mt8183: fix bank number settings michael.kao
2019-05-10 13:27     ` michael.kao
2019-05-10 13:27   ` [PATCH v2 8/8] thermal: mediatek: use spinlock to protect PTPCORESEL michael.kao
2019-05-10 13:27     ` michael.kao
2019-05-10 13:27 ` [PATCH v2 3/8] arm64: dts: mt8183: Add #cooling-cells to CPU nodes michael.kao
2019-05-10 13:27   ` michael.kao
2019-05-10 13:27 ` [PATCH v2 7/8] thermal: mediatek: add another get_temp ops for thermal sensors michael.kao
2019-05-10 13:27   ` michael.kao
2019-09-09 11:13   ` Hsin-Yi Wang
2019-09-09 11:13     ` Hsin-Yi Wang
2019-09-09 11:13     ` Hsin-Yi Wang
2019-11-21  7:00   ` Hsin-Yi Wang
2019-11-21  7:00     ` Hsin-Yi Wang
2019-11-21  7:00     ` Hsin-Yi Wang
2019-12-06  9:35     ` Michael Kao
2019-12-06  9:35       ` Michael Kao
2019-12-06  9:35       ` Michael Kao
2019-12-05 16:38 ` [PATCH v2 0/8] Add Mediatek thermal dirver and dtsi Daniel Lezcano
2019-12-05 16:38   ` Daniel Lezcano
2019-12-05 16:38   ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557494826-6044-2-git-send-email-michael.kao@mediatek.com \
    --to=michael.kao@mediatek.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=hsinyi@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.