All of lore.kernel.org
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>
Cc: David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v2 1/2] clk: qcom: rcg2: Add support for display port clock ops
Date: Wed, 15 May 2019 09:50:38 +0530	[thread overview]
Message-ID: <1557894039-31835-2-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1557894039-31835-1-git-send-email-tdas@codeaurora.org>

New display port clock ops supported for display port clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig    |  1 +
 drivers/clk/qcom/clk-rcg.h  |  1 +
 drivers/clk/qcom/clk-rcg2.c | 81 ++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 82 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 18bdf34..0de080f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -15,6 +15,7 @@ menuconfig COMMON_CLK_QCOM
 	depends on ARCH_QCOM || COMPILE_TEST
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select RATIONAL

 if COMMON_CLK_QCOM

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index c25b57c..c6f64be 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -161,6 +161,7 @@ struct clk_rcg2 {
 extern const struct clk_ops clk_pixel_ops;
 extern const struct clk_ops clk_gfx3d_ops;
 extern const struct clk_ops clk_rcg2_shared_ops;
+extern const struct clk_ops clk_dp_ops;

 struct clk_rcg_dfs_data {
 	struct clk_rcg2 *rcg;
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 8c02bff..98071c0 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2013, 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013, 2018-2019, The Linux Foundation. All rights reserved.
  */

 #include <linux/kernel.h>
@@ -10,6 +10,7 @@
 #include <linux/export.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
+#include <linux/rational.h>
 #include <linux/regmap.h>
 #include <linux/math64.h>
 #include <linux/slab.h>
@@ -1128,3 +1129,81 @@ int qcom_cc_register_rcg_dfs(struct regmap *regmap,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qcom_cc_register_rcg_dfs);
+
+static int clk_rcg2_dp_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl f = { 0 };
+	u32 mask = BIT(rcg->hid_width) - 1;
+	u32 hid_div, cfg;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+	unsigned long num, den;
+
+	rational_best_approximation(parent_rate, rate,
+			GENMASK(rcg->mnd_width - 1, 0),
+			GENMASK(rcg->mnd_width - 1, 0), &den, &num);
+
+	if (!num || !den) {
+		pr_err("Invalid MN values derived for requested rate %lu\n",
+							rate);
+		return -EINVAL;
+	}
+
+	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
+	hid_div = cfg;
+	cfg &= CFG_SRC_SEL_MASK;
+	cfg >>= CFG_SRC_SEL_SHIFT;
+
+	for (i = 0; i < num_parents; i++)
+		if (cfg == rcg->parent_map[i].cfg) {
+			f.src = rcg->parent_map[i].src;
+			break;
+	}
+
+	f.pre_div = hid_div;
+	f.pre_div >>= CFG_SRC_DIV_SHIFT;
+	f.pre_div &= mask;
+
+	if (num == den) {
+		f.m = 0;
+		f.n = 0;
+	} else {
+		f.m = num;
+		f.n = den;
+	}
+
+	return clk_rcg2_configure(rcg, &f);
+}
+
+static int clk_rcg2_dp_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return clk_rcg2_dp_set_rate(hw, rate, parent_rate);
+}
+
+static int clk_rcg2_dp_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	struct clk_rate_request parent_req = *req;
+	int ret;
+
+	ret = __clk_determine_rate(clk_hw_get_parent(hw), &parent_req);
+	if (ret)
+		return ret;
+
+	req->best_parent_rate = parent_req.rate;
+
+	return 0;
+}
+
+const struct clk_ops clk_dp_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_rcg2_dp_set_rate,
+	.set_rate_and_parent = clk_rcg2_dp_set_rate_and_parent,
+	.determine_rate = clk_rcg2_dp_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_dp_ops);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


  reply	other threads:[~2019-05-15  4:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15  4:20 [PATCH v2 0/2] Add support for display port clocks and clock ops Taniya Das
2019-05-15  4:20 ` Taniya Das [this message]
2019-07-15 22:43   ` [PATCH v2 1/2] clk: qcom: rcg2: Add support for display port " Stephen Boyd
2019-07-31 18:15     ` Taniya Das
2019-05-15  4:20 ` [PATCH v2 2/2] clk: qcom : dispcc: Add support for display port clocks Taniya Das
2019-07-15 22:37   ` Stephen Boyd
2019-07-31 18:15     ` Taniya Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557894039-31835-2-git-send-email-tdas@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.