From: Hugues Fruchet <hugues.fruchet@st.com> To: Alexandre Torgue <alexandre.torgue@st.com>, Mauro Carvalho Chehab <mchehab@kernel.org>, Hans Verkuil <hverkuil@xs4all.nl>, Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <linux-media@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, Benjamin Gaignard <benjamin.gaignard@linaro.org>, Yannick Fertre <yannick.fertre@st.com>, Philippe CORNU <philippe.cornu@st.com>, "Hugues Fruchet" <hugues.fruchet@st.com>, Mickael GUENE <mickael.guene@st.com> Subject: [PATCH v2 3/3] media: stm32-dcmi: add support of several sub-devices Date: Tue, 11 Jun 2019 10:48:32 +0200 [thread overview] Message-ID: <1560242912-17138-4-git-send-email-hugues.fruchet@st.com> (raw) In-Reply-To: <1560242912-17138-1-git-send-email-hugues.fruchet@st.com> Add support of several sub-devices within pipeline instead of a single one. This allows to support a CSI-2 camera sensor connected through a CSI-2 to parallel bridge. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> --- drivers/media/platform/stm32/stm32-dcmi.c | 207 +++++++++++++++++++++++++++--- 1 file changed, 189 insertions(+), 18 deletions(-) diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c index 3a69783..144912f 100644 --- a/drivers/media/platform/stm32/stm32-dcmi.c +++ b/drivers/media/platform/stm32/stm32-dcmi.c @@ -173,6 +173,7 @@ struct stm32_dcmi { struct media_device mdev; struct media_pad vid_cap_pad; + struct media_pipeline pipeline; }; static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n) @@ -584,6 +585,135 @@ static void dcmi_buf_queue(struct vb2_buffer *vb) spin_unlock_irq(&dcmi->irqlock); } +static struct media_entity *dcmi_find_sensor(struct stm32_dcmi *dcmi) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct v4l2_subdev *subdev; + struct media_pad *pad; + + /* Walk searching for entity having no sink */ + while (1) { + pad = &entity->pads[0]; + + subdev = media_entity_to_v4l2_subdev(entity); + + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + } + + return entity; +} + +static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi, + struct v4l2_subdev_pad_config *pad_cfg, + struct v4l2_subdev_format *format) +{ + struct media_entity *entity = &dcmi->sensor->entity; + struct v4l2_subdev *subdev; + struct media_pad *sink_pad = NULL; + struct media_pad *src_pad = NULL; + struct media_pad *pad = NULL; + struct v4l2_subdev_format fmt = *format; + bool found = false; + int ret; + + /* + * Starting from sensor subdevice, walk within + * pipeline and set format on each subdevice + */ + while (1) { + unsigned int i; + + /* Search if current entity has a source pad */ + for (i = 0; i < entity->num_pads; i++) { + pad = &entity->pads[i]; + if (pad->flags & MEDIA_PAD_FL_SOURCE) { + src_pad = pad; + found = true; + break; + } + } + if (!found) + break; + + subdev = media_entity_to_v4l2_subdev(entity); + + /* Propagate format on sink pad if any, otherwise source pad */ + if (sink_pad) + pad = sink_pad; + + dev_dbg(dcmi->dev, "%s[%d] pad format set to 0x%x %ux%u\n", + subdev->name, pad->index, format->format.code, + format->format.width, format->format.height); + + fmt.pad = pad->index; + ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt); + if (ret < 0) + return ret; + + /* Walk to next entity */ + sink_pad = media_entity_remote_pad(src_pad); + if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity)) + break; + + entity = sink_pad->entity; + } + *format = fmt; + + return 0; +} + +static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct v4l2_subdev *subdev; + struct media_pad *pad; + int ret; + + /* Start/stop all entities within pipeline */ + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + ret = v4l2_subdev_call(subdev, video, s_stream, state); + if (ret < 0 && ret != -ENOIOCTLCMD) { + dev_err(dcmi->dev, "%s: %s failed to %s streaming (%d)\n", + __func__, subdev->name, + state ? "start" : "stop", ret); + return ret; + } + + dev_dbg(dcmi->dev, "%s is %s\n", + subdev->name, state ? "started" : "stopped"); + } + + return 0; +} + +static int dcmi_pipeline_start(struct stm32_dcmi *dcmi) +{ + return dcmi_pipeline_s_stream(dcmi, 1); +} + +static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi) +{ + dcmi_pipeline_s_stream(dcmi, 0); +} + static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); @@ -598,14 +728,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) goto err_release_buffers; } - /* Enable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->sensor, video, s_stream, 1); - if (ret && ret != -ENOIOCTLCMD) { - dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error", - __func__); + ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline); + if (ret < 0) { + dev_err(dcmi->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n", + __func__, ret); goto err_pm_put; } + ret = dcmi_pipeline_start(dcmi); + if (ret) + goto err_media_pipeline_stop; + spin_lock_irq(&dcmi->irqlock); /* Set bus width */ @@ -677,7 +810,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) if (ret) { dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n", __func__); - goto err_subdev_streamoff; + goto err_pipeline_stop; } /* Enable interruptions */ @@ -688,8 +821,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) return 0; -err_subdev_streamoff: - v4l2_subdev_call(dcmi->sensor, video, s_stream, 0); +err_pipeline_stop: + dcmi_pipeline_stop(dcmi); + +err_media_pipeline_stop: + media_pipeline_stop(&dcmi->vdev->entity); err_pm_put: pm_runtime_put(dcmi->dev); @@ -714,13 +850,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); struct dcmi_buf *buf, *node; - int ret; - /* Disable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->sensor, video, s_stream, 0); - if (ret && ret != -ENOIOCTLCMD) - dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n", - __func__, ret); + dcmi_pipeline_stop(dcmi); + + media_pipeline_stop(&dcmi->vdev->entity); spin_lock_irq(&dcmi->irqlock); @@ -938,8 +1071,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f) mf->width = sd_framesize.width; mf->height = sd_framesize.height; - ret = v4l2_subdev_call(dcmi->sensor, pad, - set_fmt, NULL, &format); + ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format); if (ret < 0) return ret; @@ -1530,7 +1662,19 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier) struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); int ret; + /* + * Now that the graph is complete, + * we search for the camera sensor subdevice + * in order to expose it through V4L2 interface + */ + dcmi->sensor = media_entity_to_v4l2_subdev(dcmi_find_sensor(dcmi)); + if (!dcmi->sensor) { + dev_err(dcmi->dev, "No camera sensor subdevice found\n"); + return -ENODEV; + } + dcmi->vdev->ctrl_handler = dcmi->sensor->ctrl_handler; + ret = dcmi_formats_init(dcmi); if (ret) { dev_err(dcmi->dev, "No supported mediabus format found\n"); @@ -1574,12 +1718,30 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier, struct v4l2_async_subdev *asd) { struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + unsigned int ret; + int src_pad; dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name); - dcmi->sensor = subdev; + /* + * Link this sub-device to DCMI, it could be + * a parallel camera sensor or a bridge + */ + src_pad = media_entity_get_fwnode_pad(&subdev->entity, + subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + + ret = media_create_pad_link(&subdev->entity, src_pad, + &dcmi->vdev->entity, 0, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + if (ret) + dev_err(dcmi->dev, "Failed to create media pad link with subdev %s\n", + subdev->name); + else + dev_dbg(dcmi->dev, "DCMI is now linked to %s\n", subdev->name); - return 0; + return ret; } static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = { @@ -1639,6 +1801,15 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi) return ret; } + /* Register all the subdev nodes */ + ret = v4l2_device_register_subdev_nodes(&dcmi->v4l2_dev); + if (ret) { + dev_err(dcmi->dev, "Failed to register subdev nodes\n"); + v4l2_async_notifier_unregister(&dcmi->notifier); + of_node_put(dcmi->entity.node); + return ret; + } + return 0; } -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Hugues Fruchet <hugues.fruchet@st.com> To: Alexandre Torgue <alexandre.torgue@st.com>, Mauro Carvalho Chehab <mchehab@kernel.org>, Hans Verkuil <hverkuil@xs4all.nl>, Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Mickael GUENE <mickael.guene@st.com>, linux-kernel@vger.kernel.org, Philippe CORNU <philippe.cornu@st.com>, Yannick Fertre <yannick.fertre@st.com>, Benjamin Gaignard <benjamin.gaignard@linaro.org>, Hugues Fruchet <hugues.fruchet@st.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Subject: [PATCH v2 3/3] media: stm32-dcmi: add support of several sub-devices Date: Tue, 11 Jun 2019 10:48:32 +0200 [thread overview] Message-ID: <1560242912-17138-4-git-send-email-hugues.fruchet@st.com> (raw) In-Reply-To: <1560242912-17138-1-git-send-email-hugues.fruchet@st.com> Add support of several sub-devices within pipeline instead of a single one. This allows to support a CSI-2 camera sensor connected through a CSI-2 to parallel bridge. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> --- drivers/media/platform/stm32/stm32-dcmi.c | 207 +++++++++++++++++++++++++++--- 1 file changed, 189 insertions(+), 18 deletions(-) diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c index 3a69783..144912f 100644 --- a/drivers/media/platform/stm32/stm32-dcmi.c +++ b/drivers/media/platform/stm32/stm32-dcmi.c @@ -173,6 +173,7 @@ struct stm32_dcmi { struct media_device mdev; struct media_pad vid_cap_pad; + struct media_pipeline pipeline; }; static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n) @@ -584,6 +585,135 @@ static void dcmi_buf_queue(struct vb2_buffer *vb) spin_unlock_irq(&dcmi->irqlock); } +static struct media_entity *dcmi_find_sensor(struct stm32_dcmi *dcmi) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct v4l2_subdev *subdev; + struct media_pad *pad; + + /* Walk searching for entity having no sink */ + while (1) { + pad = &entity->pads[0]; + + subdev = media_entity_to_v4l2_subdev(entity); + + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + } + + return entity; +} + +static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi, + struct v4l2_subdev_pad_config *pad_cfg, + struct v4l2_subdev_format *format) +{ + struct media_entity *entity = &dcmi->sensor->entity; + struct v4l2_subdev *subdev; + struct media_pad *sink_pad = NULL; + struct media_pad *src_pad = NULL; + struct media_pad *pad = NULL; + struct v4l2_subdev_format fmt = *format; + bool found = false; + int ret; + + /* + * Starting from sensor subdevice, walk within + * pipeline and set format on each subdevice + */ + while (1) { + unsigned int i; + + /* Search if current entity has a source pad */ + for (i = 0; i < entity->num_pads; i++) { + pad = &entity->pads[i]; + if (pad->flags & MEDIA_PAD_FL_SOURCE) { + src_pad = pad; + found = true; + break; + } + } + if (!found) + break; + + subdev = media_entity_to_v4l2_subdev(entity); + + /* Propagate format on sink pad if any, otherwise source pad */ + if (sink_pad) + pad = sink_pad; + + dev_dbg(dcmi->dev, "%s[%d] pad format set to 0x%x %ux%u\n", + subdev->name, pad->index, format->format.code, + format->format.width, format->format.height); + + fmt.pad = pad->index; + ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt); + if (ret < 0) + return ret; + + /* Walk to next entity */ + sink_pad = media_entity_remote_pad(src_pad); + if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity)) + break; + + entity = sink_pad->entity; + } + *format = fmt; + + return 0; +} + +static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct v4l2_subdev *subdev; + struct media_pad *pad; + int ret; + + /* Start/stop all entities within pipeline */ + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + ret = v4l2_subdev_call(subdev, video, s_stream, state); + if (ret < 0 && ret != -ENOIOCTLCMD) { + dev_err(dcmi->dev, "%s: %s failed to %s streaming (%d)\n", + __func__, subdev->name, + state ? "start" : "stop", ret); + return ret; + } + + dev_dbg(dcmi->dev, "%s is %s\n", + subdev->name, state ? "started" : "stopped"); + } + + return 0; +} + +static int dcmi_pipeline_start(struct stm32_dcmi *dcmi) +{ + return dcmi_pipeline_s_stream(dcmi, 1); +} + +static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi) +{ + dcmi_pipeline_s_stream(dcmi, 0); +} + static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); @@ -598,14 +728,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) goto err_release_buffers; } - /* Enable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->sensor, video, s_stream, 1); - if (ret && ret != -ENOIOCTLCMD) { - dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error", - __func__); + ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline); + if (ret < 0) { + dev_err(dcmi->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n", + __func__, ret); goto err_pm_put; } + ret = dcmi_pipeline_start(dcmi); + if (ret) + goto err_media_pipeline_stop; + spin_lock_irq(&dcmi->irqlock); /* Set bus width */ @@ -677,7 +810,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) if (ret) { dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n", __func__); - goto err_subdev_streamoff; + goto err_pipeline_stop; } /* Enable interruptions */ @@ -688,8 +821,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) return 0; -err_subdev_streamoff: - v4l2_subdev_call(dcmi->sensor, video, s_stream, 0); +err_pipeline_stop: + dcmi_pipeline_stop(dcmi); + +err_media_pipeline_stop: + media_pipeline_stop(&dcmi->vdev->entity); err_pm_put: pm_runtime_put(dcmi->dev); @@ -714,13 +850,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); struct dcmi_buf *buf, *node; - int ret; - /* Disable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->sensor, video, s_stream, 0); - if (ret && ret != -ENOIOCTLCMD) - dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n", - __func__, ret); + dcmi_pipeline_stop(dcmi); + + media_pipeline_stop(&dcmi->vdev->entity); spin_lock_irq(&dcmi->irqlock); @@ -938,8 +1071,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f) mf->width = sd_framesize.width; mf->height = sd_framesize.height; - ret = v4l2_subdev_call(dcmi->sensor, pad, - set_fmt, NULL, &format); + ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format); if (ret < 0) return ret; @@ -1530,7 +1662,19 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier) struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); int ret; + /* + * Now that the graph is complete, + * we search for the camera sensor subdevice + * in order to expose it through V4L2 interface + */ + dcmi->sensor = media_entity_to_v4l2_subdev(dcmi_find_sensor(dcmi)); + if (!dcmi->sensor) { + dev_err(dcmi->dev, "No camera sensor subdevice found\n"); + return -ENODEV; + } + dcmi->vdev->ctrl_handler = dcmi->sensor->ctrl_handler; + ret = dcmi_formats_init(dcmi); if (ret) { dev_err(dcmi->dev, "No supported mediabus format found\n"); @@ -1574,12 +1718,30 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier, struct v4l2_async_subdev *asd) { struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + unsigned int ret; + int src_pad; dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name); - dcmi->sensor = subdev; + /* + * Link this sub-device to DCMI, it could be + * a parallel camera sensor or a bridge + */ + src_pad = media_entity_get_fwnode_pad(&subdev->entity, + subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + + ret = media_create_pad_link(&subdev->entity, src_pad, + &dcmi->vdev->entity, 0, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + if (ret) + dev_err(dcmi->dev, "Failed to create media pad link with subdev %s\n", + subdev->name); + else + dev_dbg(dcmi->dev, "DCMI is now linked to %s\n", subdev->name); - return 0; + return ret; } static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = { @@ -1639,6 +1801,15 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi) return ret; } + /* Register all the subdev nodes */ + ret = v4l2_device_register_subdev_nodes(&dcmi->v4l2_dev); + if (ret) { + dev_err(dcmi->dev, "Failed to register subdev nodes\n"); + v4l2_async_notifier_unregister(&dcmi->notifier); + of_node_put(dcmi->entity.node); + return ret; + } + return 0; } -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-11 8:49 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-11 8:48 [PATCH v2 0/3] DCMI bridge support Hugues Fruchet 2019-06-11 8:48 ` Hugues Fruchet 2019-06-11 8:48 ` [PATCH v2 1/3] media: stm32-dcmi: improve sensor subdev naming Hugues Fruchet 2019-06-11 8:48 ` Hugues Fruchet 2019-06-20 15:26 ` Sakari Ailus 2019-06-20 15:26 ` Sakari Ailus 2019-07-02 15:21 ` Hugues FRUCHET 2019-07-02 15:21 ` Hugues FRUCHET 2019-06-11 8:48 ` [PATCH v2 2/3] media: stm32-dcmi: add media controller support Hugues Fruchet 2019-06-11 8:48 ` Hugues Fruchet 2019-06-20 12:01 ` Hans Verkuil 2019-06-20 12:01 ` Hans Verkuil 2019-07-02 15:18 ` Hugues FRUCHET 2019-07-02 15:18 ` Hugues FRUCHET 2019-06-20 16:13 ` Sakari Ailus 2019-06-20 16:13 ` Sakari Ailus 2019-07-02 15:29 ` Hugues FRUCHET 2019-07-02 15:29 ` Hugues FRUCHET 2019-06-11 8:48 ` Hugues Fruchet [this message] 2019-06-11 8:48 ` [PATCH v2 3/3] media: stm32-dcmi: add support of several sub-devices Hugues Fruchet 2019-06-20 15:54 ` Sakari Ailus 2019-06-20 15:54 ` Sakari Ailus 2019-07-02 15:26 ` Hugues FRUCHET 2019-07-02 15:26 ` Hugues FRUCHET 2019-06-20 16:17 ` [PATCH v2 0/3] DCMI bridge support Sakari Ailus 2019-06-20 16:17 ` Sakari Ailus 2019-06-24 10:10 ` Hugues FRUCHET 2019-06-24 10:10 ` Hugues FRUCHET 2019-06-26 17:25 ` Laurent Pinchart 2019-06-26 17:25 ` Laurent Pinchart 2019-06-27 12:38 ` Hugues FRUCHET 2019-06-27 12:38 ` Hugues FRUCHET 2019-06-27 13:38 ` Laurent Pinchart 2019-06-27 13:38 ` Laurent Pinchart 2019-07-05 7:55 ` Sakari Ailus 2019-07-05 7:55 ` Sakari Ailus 2019-07-05 8:04 ` Laurent Pinchart 2019-07-05 8:04 ` Laurent Pinchart 2019-07-05 9:16 ` Sakari Ailus 2019-07-05 9:16 ` Sakari Ailus
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1560242912-17138-4-git-send-email-hugues.fruchet@st.com \ --to=hugues.fruchet@st.com \ --cc=alexandre.torgue@st.com \ --cc=benjamin.gaignard@linaro.org \ --cc=hverkuil@xs4all.nl \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mchehab@kernel.org \ --cc=mickael.guene@st.com \ --cc=philippe.cornu@st.com \ --cc=sakari.ailus@linux.intel.com \ --cc=yannick.fertre@st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.