All of lore.kernel.org
 help / color / mirror / Atom feed
From: mac.chiang@intel.com
To: alsa-devel@alsa-project.org
Cc: mac.chiang@intel.com, broonie@kernel.org, lgirdwood@gmail.com,
	liam.r.girdwood@intel.com
Subject: [PATCH v2] ASoC: max98357a: avoid speaker pop when playback startup
Date: Wed, 19 Jun 2019 14:47:17 +0800	[thread overview]
Message-ID: <1560926837-5206-1-git-send-email-mac.chiang@intel.com> (raw)

From: Mac Chiang <mac.chiang@intel.com>

Loud speaker pop happens during playback even when in slience
playback. Specify Max98357a amp delay times to make sure
clocks are always earlier than sdmode on.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
---
Changelog:
  v2:
    - added device_property_read_u32() func
---
---
 .../devicetree/bindings/sound/max98357a.txt        |  4 ++
 sound/soc/codecs/max98357a.c                       | 68 +++++++++++++++++++---
 2 files changed, 63 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt
index 28645a2..4bce14c 100644
--- a/Documentation/devicetree/bindings/sound/max98357a.txt
+++ b/Documentation/devicetree/bindings/sound/max98357a.txt
@@ -9,6 +9,10 @@ Optional properties:
 - sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
         If this option is not specified then driver does not manage
         the pin state (e.g. chip is always on).
+- sdmode-delay : specify delay time for SD_MODE pin.
+        If this option is specified, which means it's required i2s clocks
+        ready before SD_MODE is unmuted in order to avoid the speaker pop noise.
+        It's observed that 5ms is sufficient.
 
 Example:
 
diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c
index d037a3e..91ca0aa 100644
--- a/sound/soc/codecs/max98357a.c
+++ b/sound/soc/codecs/max98357a.c
@@ -27,24 +27,42 @@
 #include <sound/soc-dai.h>
 #include <sound/soc-dapm.h>
 
+struct max98357a_priv {
+	struct delayed_work enable_sdmode_work;
+	struct gpio_desc *sdmode;
+	unsigned int sdmode_delay;
+};
+
+static void max98357a_enable_sdmode_work(struct work_struct *work)
+{
+	struct max98357a_priv *max98357a =
+	container_of(work, struct max98357a_priv,
+			enable_sdmode_work.work);
+
+	gpiod_set_value(max98357a->sdmode, 1);
+}
+
 static int max98357a_daiops_trigger(struct snd_pcm_substream *substream,
 		int cmd, struct snd_soc_dai *dai)
 {
-	struct gpio_desc *sdmode = snd_soc_dai_get_drvdata(dai);
+	struct max98357a_priv *max98357a = snd_soc_dai_get_drvdata(dai);
 
-	if (!sdmode)
+	if (!max98357a->sdmode)
 		return 0;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		gpiod_set_value(sdmode, 1);
+		queue_delayed_work(system_power_efficient_wq,
+				&max98357a->enable_sdmode_work,
+				msecs_to_jiffies(max98357a->sdmode_delay));
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		gpiod_set_value(sdmode, 0);
+		cancel_delayed_work_sync(&max98357a->enable_sdmode_work);
+		gpiod_set_value(max98357a->sdmode, 0);
 		break;
 	}
 
@@ -61,19 +79,32 @@ static const struct snd_soc_dapm_route max98357a_dapm_routes[] = {
 
 static int max98357a_component_probe(struct snd_soc_component *component)
 {
-	struct gpio_desc *sdmode;
+	struct max98357a_priv *max98357a = snd_soc_component_get_drvdata(component);
+
+	max98357a->sdmode = devm_gpiod_get_optional(component->dev,
+						"sdmode", GPIOD_OUT_LOW);
 
-	sdmode = devm_gpiod_get_optional(component->dev, "sdmode", GPIOD_OUT_LOW);
-	if (IS_ERR(sdmode))
-		return PTR_ERR(sdmode);
+	if (IS_ERR(max98357a->sdmode))
+		return PTR_ERR(max98357a->sdmode);
 
-	snd_soc_component_set_drvdata(component, sdmode);
+	snd_soc_component_set_drvdata(component, max98357a);
+
+	INIT_DELAYED_WORK(&max98357a->enable_sdmode_work,
+				max98357a_enable_sdmode_work);
 
 	return 0;
 }
 
+static void max98357a_component_remove(struct snd_soc_component *component)
+{
+	struct max98357a_priv *max98357a = snd_soc_component_get_drvdata(component);
+
+	cancel_delayed_work_sync(&max98357a->enable_sdmode_work);
+}
+
 static const struct snd_soc_component_driver max98357a_component_driver = {
 	.probe			= max98357a_component_probe,
+	.remove			= max98357a_component_remove,
 	.dapm_widgets		= max98357a_dapm_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(max98357a_dapm_widgets),
 	.dapm_routes		= max98357a_dapm_routes,
@@ -112,6 +143,25 @@ static struct snd_soc_dai_driver max98357a_dai_driver = {
 
 static int max98357a_platform_probe(struct platform_device *pdev)
 {
+	struct max98357a_priv *max98357a;
+	int ret;
+
+	max98357a = devm_kzalloc(&pdev->dev, sizeof(*max98357a), GFP_KERNEL);
+
+	if (!max98357a)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(&pdev->dev, "sdmode-delay",
+			&max98357a->sdmode_delay);
+
+	if (ret) {
+		max98357a->sdmode_delay = 0;
+		dev_dbg(&pdev->dev,
+			"no optional property 'sdmode-delay' found, default: no delay\n");
+	}
+
+	dev_set_drvdata(&pdev->dev, max98357a);
+
 	return devm_snd_soc_register_component(&pdev->dev,
 			&max98357a_component_driver,
 			&max98357a_dai_driver, 1);
-- 
2.7.4

                 reply	other threads:[~2019-06-19  6:47 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560926837-5206-1-git-send-email-mac.chiang@intel.com \
    --to=mac.chiang@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=liam.r.girdwood@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.