From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Matthias Brugger <mbrugger@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
linux-mmc@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2
Date: Mon, 22 Jul 2019 07:54:40 +0200 [thread overview]
Message-ID: <1563774880-8061-10-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>
Add a new compatible for the additional emmc2 controller
on BCM2711 and clearify usage.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
index fa90d25..09d87cc 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller.
Required properties:
- compatible : Should be one of the following
"brcm,bcm2835-sdhci"
+ "brcm,bcm2711-emmc2"
"brcm,sdhci-iproc-cygnus"
"brcm,sdhci-iproc"
-Use brcm2835-sdhci for Rasperry PI.
+Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
+bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
restricted to 32bit host accesses to SDHCI registers.
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Matthias Brugger <mbrugger@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2
Date: Mon, 22 Jul 2019 07:54:40 +0200 [thread overview]
Message-ID: <1563774880-8061-10-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>
Add a new compatible for the additional emmc2 controller
on BCM2711 and clearify usage.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
index fa90d25..09d87cc 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller.
Required properties:
- compatible : Should be one of the following
"brcm,bcm2835-sdhci"
+ "brcm,bcm2711-emmc2"
"brcm,sdhci-iproc-cygnus"
"brcm,sdhci-iproc"
-Use brcm2835-sdhci for Rasperry PI.
+Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
+bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
restricted to 32bit host accesses to SDHCI registers.
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Matthias Brugger <mbrugger@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2
Date: Mon, 22 Jul 2019 07:54:40 +0200 [thread overview]
Message-ID: <1563774880-8061-10-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>
Add a new compatible for the additional emmc2 controller
on BCM2711 and clearify usage.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
index fa90d25..09d87cc 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller.
Required properties:
- compatible : Should be one of the following
"brcm,bcm2835-sdhci"
+ "brcm,bcm2711-emmc2"
"brcm,sdhci-iproc-cygnus"
"brcm,sdhci-iproc"
-Use brcm2835-sdhci for Rasperry PI.
+Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
+bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
restricted to 32bit host accesses to SDHCI registers.
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-22 5:56 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 5:54 [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 01/18] ARM: bcm283x: Reduce register ranges for UART, SPI and I2C Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-24 20:01 ` Stefan Wahren
2019-07-24 20:01 ` Stefan Wahren
2019-07-24 20:01 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 02/18] ARM: bcm2835: DMA can only address 1GB Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 03/18] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 17:54 ` Eric Anholt
2019-07-22 17:54 ` Eric Anholt
2019-07-22 17:54 ` Eric Anholt
2019-07-22 5:54 ` [PATCH 04/18] ARM: dts: bcm283x: Define MMC interfaces at board level Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-08-12 21:03 ` Stefan Wahren
2019-08-12 21:03 ` Stefan Wahren
2019-08-12 21:03 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 05/18] ARM: dts: bcm283x: Define memory " Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-08-12 21:02 ` Stefan Wahren
2019-08-12 21:02 ` Stefan Wahren
2019-08-12 21:02 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 06/18] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 07/18] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 10:30 ` Matthias Brugger
2019-08-11 20:43 ` Stefan Wahren
2019-08-11 20:43 ` Stefan Wahren
2019-08-11 20:43 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 08/18] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 5:54 ` Stefan Wahren [this message]
2019-07-22 5:54 ` [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2 Stefan Wahren
2019-07-22 5:54 ` Stefan Wahren
2019-07-22 10:31 ` Matthias Brugger
2019-07-22 10:31 ` Matthias Brugger
2019-07-22 10:31 ` Matthias Brugger
2019-07-24 14:08 ` Ulf Hansson
2019-07-24 14:08 ` Ulf Hansson
2019-07-24 14:08 ` Ulf Hansson
2019-07-22 11:26 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Matthias Brugger
2019-07-22 11:26 ` Matthias Brugger
2019-07-22 11:26 ` Matthias Brugger
2019-07-22 13:18 ` Nicolas Saenz Julienne
2019-07-22 13:18 ` Nicolas Saenz Julienne
2019-07-22 13:18 ` Nicolas Saenz Julienne
2019-07-22 18:10 ` Stefan Wahren
2019-07-22 18:10 ` Stefan Wahren
2019-07-22 18:10 ` Stefan Wahren
2019-07-23 9:34 ` Christoph Hellwig
2019-07-23 9:34 ` Christoph Hellwig
2019-07-23 9:34 ` Christoph Hellwig
2019-07-23 13:32 ` Nicolas Saenz Julienne
2019-07-23 13:32 ` Nicolas Saenz Julienne
2019-07-23 14:33 ` Christoph Hellwig
2019-07-23 14:33 ` Christoph Hellwig
2019-07-23 14:33 ` Christoph Hellwig
2019-07-23 16:26 ` Stefan Wahren
2019-07-23 16:26 ` Stefan Wahren
2019-07-23 16:26 ` Stefan Wahren
2019-07-23 17:33 ` Nicolas Saenz Julienne
2019-07-23 17:33 ` Nicolas Saenz Julienne
2019-07-23 21:30 ` Stefan Wahren
2019-07-23 21:30 ` Stefan Wahren
2019-07-23 21:30 ` Stefan Wahren
2019-07-24 2:53 ` Chen-Yu Tsai
2019-07-24 2:53 ` Chen-Yu Tsai
2019-07-24 2:53 ` Chen-Yu Tsai
2019-07-24 8:37 ` Nicolas Saenz Julienne
2019-07-24 8:37 ` Nicolas Saenz Julienne
2019-07-27 15:17 ` brcmfmac: Probing regression in Linux 5.3-rc1 Stefan Wahren
2019-07-29 5:44 ` Stefan Wahren
2019-07-29 5:44 ` Stefan Wahren
2019-07-25 8:22 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Nicolas Saenz Julienne
2019-07-25 8:22 ` Nicolas Saenz Julienne
2019-07-25 22:09 ` Stefan Wahren
2019-07-25 22:09 ` Stefan Wahren
2019-07-25 22:09 ` Stefan Wahren
2019-07-22 18:01 ` Eric Anholt
2019-07-22 18:01 ` Eric Anholt
2019-07-22 18:01 ` Eric Anholt
2019-07-28 11:22 ` Stefan Wahren
2019-07-28 11:22 ` Stefan Wahren
2019-07-28 11:22 ` Stefan Wahren
2019-08-05 9:33 ` Linus Walleij
2019-08-05 9:33 ` Linus Walleij
2019-08-05 9:33 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1563774880-8061-10-git-send-email-wahrenst@gmx.net \
--to=wahrenst@gmx.net \
--cc=adrian.hunter@intel.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mbrugger@suse.com \
--cc=mturquette@baylibre.com \
--cc=nsaenzjulienne@suse.de \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sbranden@broadcom.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.