All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manikanta Pubbisetty <mpubbise@codeaurora.org>
To: johannes@sipsolutions.net
Cc: linux-wireless@vger.kernel.org,
	Manikanta Pubbisetty <mpubbise@codeaurora.org>
Subject: [PATCH] {nl,mac}80211: fix interface combinations on crypto controlled devices
Date: Mon, 22 Jul 2019 12:44:50 +0530	[thread overview]
Message-ID: <1563779690-9716-1-git-send-email-mpubbise@codeaurora.org> (raw)

Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.

General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.

Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.

Adding a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
---
 include/net/cfg80211.h | 15 +++++++++++++++
 net/mac80211/util.c    |  7 +++----
 net/wireless/core.c    |  6 ++----
 net/wireless/nl80211.c |  4 +---
 net/wireless/util.c    | 27 +++++++++++++++++++++++++--
 5 files changed, 46 insertions(+), 13 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 21c3e34..f312c2b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7320,6 +7320,21 @@ void cfg80211_pmsr_complete(struct wireless_dev *wdev,
 			    struct cfg80211_pmsr_request *req,
 			    gfp_t gfp);
 
+/**
+ * cfg80211_iftype_allowed - check whether the interface can be allowed
+ * @wiphy: the wiphy
+ * @iftype: interface type
+ * @is_4addr: use_4addr flag, must be '0' when check_swif is '1'
+ * @check_swif: check iftype against software interfaces
+ *
+ * Check whether the interface is allowed to operate; additionally, this API
+ * can be used to check iftype against the software interfaces when
+ * check_swif is '1'.
+ */
+bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype,
+			     bool is_4addr, u8 check_swif);
+
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1b224fa..ad1e581 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -3796,9 +3796,7 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata,
 	}
 
 	/* Always allow software iftypes */
-	if (local->hw.wiphy->software_iftypes & BIT(iftype) ||
-	    (iftype == NL80211_IFTYPE_AP_VLAN &&
-	     local->hw.wiphy->flags & WIPHY_FLAG_4ADDR_AP)) {
+	if (cfg80211_iftype_allowed(local->hw.wiphy, iftype, 0, 1)) {
 		if (radar_detect)
 			return -EINVAL;
 		return 0;
@@ -3833,7 +3831,8 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata,
 
 		if (sdata_iter == sdata ||
 		    !ieee80211_sdata_running(sdata_iter) ||
-		    local->hw.wiphy->software_iftypes & BIT(wdev_iter->iftype))
+		    cfg80211_iftype_allowed(local->hw.wiphy,
+					    wdev_iter->iftype, 0, 1))
 			continue;
 
 		params.iftype_num[wdev_iter->iftype]++;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 45d9afc..32b3c71 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1410,10 +1410,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
 		}
 		break;
 	case NETDEV_PRE_UP:
-		if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)) &&
-		    !(wdev->iftype == NL80211_IFTYPE_AP_VLAN &&
-		      rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP &&
-		      wdev->use_4addr))
+		if (!cfg80211_iftype_allowed(wdev->wiphy, wdev->iftype,
+					     wdev->use_4addr, 0))
 			return notifier_from_errno(-EOPNOTSUPP);
 
 		if (rfkill_blocked(rdev->rfkill))
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fc83dd1..fd05ae1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3484,9 +3484,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 			return err;
 	}
 
-	if (!(rdev->wiphy.interface_modes & (1 << type)) &&
-	    !(type == NL80211_IFTYPE_AP_VLAN && params.use_4addr &&
-	      rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP))
+	if (!cfg80211_iftype_allowed(&rdev->wiphy, type, params.use_4addr, 0))
 		return -EOPNOTSUPP;
 
 	err = nl80211_parse_mon_options(rdev, type, info, &params);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 1c39d6a..d0e35b7 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1697,7 +1697,7 @@ int cfg80211_iter_combinations(struct wiphy *wiphy,
 	for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
 		num_interfaces += params->iftype_num[iftype];
 		if (params->iftype_num[iftype] > 0 &&
-		    !(wiphy->software_iftypes & BIT(iftype)))
+		    !cfg80211_iftype_allowed(wiphy, iftype, 0, 1))
 			used_iftypes |= BIT(iftype);
 	}
 
@@ -1719,7 +1719,7 @@ int cfg80211_iter_combinations(struct wiphy *wiphy,
 			return -ENOMEM;
 
 		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
-			if (wiphy->software_iftypes & BIT(iftype))
+			if (cfg80211_iftype_allowed(wiphy, iftype, 0, 1))
 				continue;
 			for (j = 0; j < c->n_limits; j++) {
 				all_iftypes |= limits[j].types;
@@ -2072,3 +2072,26 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 	return max_vht_nss;
 }
 EXPORT_SYMBOL(ieee80211_get_vht_max_nss);
+
+bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype,
+			     bool is_4addr, u8 check_swif)
+
+{
+	bool is_vlan = iftype == NL80211_IFTYPE_AP_VLAN;
+
+	switch (check_swif) {
+	case 0:
+		if (is_vlan && is_4addr)
+			return wiphy->flags & WIPHY_FLAG_4ADDR_AP;
+		return wiphy->interface_modes & BIT(iftype);
+	case 1:
+		if (!(wiphy->software_iftypes & BIT(iftype)) && is_vlan)
+			return wiphy->flags & WIPHY_FLAG_4ADDR_AP;
+		return wiphy->software_iftypes & BIT(iftype);
+	default:
+		break;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(cfg80211_iftype_allowed);
-- 
2.7.4


                 reply	other threads:[~2019-07-22  7:15 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563779690-9716-1-git-send-email-mpubbise@codeaurora.org \
    --to=mpubbise@codeaurora.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.