All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dragan Cvetic <dragan.cvetic@xilinx.com>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>,
	<michal.simek@xilinx.com>, <linux-arm-kernel@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>,
	Dragan Cvetic <dragan.cvetic@xilinx.com>,
	Derek Kiernan <derek.kiernan@xilinx.com>
Subject: [PATCH V9 6/8] misc: xilinx_sdfec: Add stats & status ioctls
Date: Sat, 27 Jul 2019 09:33:56 +0100	[thread overview]
Message-ID: <1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com> (raw)
In-Reply-To: <1564216438-322406-1-git-send-email-dragan.cvetic@xilinx.com>

SD-FEC statistic data are:
- count of data interface errors (isr_err_count)
- count of Correctable ECC errors (cecc_count)
- count of Uncorrectable ECC errors (uecc_count)

Add support:
1. clear stats ioctl callback which clears collected
statistic data,
2. get stats ioctl callback which reads a collected
statistic data,
3. set default configuration ioctl callback,
4. start ioctl callback enables SD-FEC HW,
5. stop ioctl callback disables SD-FEC HW.

In a failed state driver enables the following ioctls:
- get status
- get statistics
- clear stats
- set default SD-FEC device configuration

Tested-by: Santhosh Dyavanapally <SDYAVANA@xilinx.com>
Tested by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Tested-by: Derek Kiernan <derek.kiernan@xilinx.com>
Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
---
 drivers/misc/xilinx_sdfec.c      | 125 +++++++++++++++++++++++++++++++++++++++
 include/uapi/misc/xilinx_sdfec.h |  75 +++++++++++++++++++++++
 2 files changed, 200 insertions(+)

diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index 61775c5..45f127a 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -206,6 +206,7 @@ struct xsdfec_clks {
  * @irq: IRQ number
  * @state_updated: indicates State updated by interrupt handler
  * @stats_updated: indicates Stats updated by interrupt handler
+ * @intr_enabled: indicates IRQ enabled
  *
  * This structure contains necessary state for SDFEC driver to operate
  */
@@ -228,6 +229,7 @@ struct xsdfec_dev {
 	int irq;
 	bool state_updated;
 	bool stats_updated;
+	bool intr_enabled;
 };
 
 static inline void xsdfec_regwrite(struct xsdfec_dev *xsdfec, u32 addr,
@@ -289,6 +291,25 @@ static void update_config_from_hw(struct xsdfec_dev *xsdfec)
 		xsdfec->state = XSDFEC_STOPPED;
 }
 
+static int xsdfec_get_status(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+	struct xsdfec_status status;
+	int err;
+
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	status.state = xsdfec->state;
+	xsdfec->state_updated = false;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+	status.activity = (xsdfec_regread(xsdfec, XSDFEC_ACTIVE_ADDR) &
+			   XSDFEC_IS_ACTIVITY_SET);
+
+	err = copy_to_user(arg, &status, sizeof(status));
+	if (err)
+		err = -EFAULT;
+
+	return err;
+}
+
 static int xsdfec_get_config(struct xsdfec_dev *xsdfec, void __user *arg)
 {
 	int err;
@@ -840,6 +861,82 @@ static int xsdfec_dev_release(struct inode *iptr, struct file *fptr)
 	return 0;
 }
 
+static int xsdfec_start(struct xsdfec_dev *xsdfec)
+{
+	u32 regread;
+
+	regread = xsdfec_regread(xsdfec, XSDFEC_FEC_CODE_ADDR);
+	regread &= 0x1;
+	if (regread != xsdfec->config.code) {
+		dev_dbg(xsdfec->dev,
+			"%s SDFEC HW code does not match driver code, reg %d, code %d",
+			__func__, regread, xsdfec->config.code);
+		return -EINVAL;
+	}
+
+	/* Set AXIS enable */
+	xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR,
+			XSDFEC_AXIS_ENABLE_MASK);
+	/* Done */
+	xsdfec->state = XSDFEC_STARTED;
+	return 0;
+}
+
+static int xsdfec_stop(struct xsdfec_dev *xsdfec)
+{
+	u32 regread;
+
+	if (xsdfec->state != XSDFEC_STARTED)
+		dev_dbg(xsdfec->dev, "Device not started correctly");
+	/* Disable AXIS_ENABLE Input interfaces only */
+	regread = xsdfec_regread(xsdfec, XSDFEC_AXIS_ENABLE_ADDR);
+	regread &= (~XSDFEC_AXIS_IN_ENABLE_MASK);
+	xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR, regread);
+	/* Stop */
+	xsdfec->state = XSDFEC_STOPPED;
+	return 0;
+}
+
+static int xsdfec_clear_stats(struct xsdfec_dev *xsdfec)
+{
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	xsdfec->isr_err_count = 0;
+	xsdfec->uecc_count = 0;
+	xsdfec->cecc_count = 0;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+	return 0;
+}
+
+static int xsdfec_get_stats(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+	int err;
+	struct xsdfec_stats user_stats;
+
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	user_stats.isr_err_count = xsdfec->isr_err_count;
+	user_stats.cecc_count = xsdfec->cecc_count;
+	user_stats.uecc_count = xsdfec->uecc_count;
+	xsdfec->stats_updated = false;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+	err = copy_to_user(arg, &user_stats, sizeof(user_stats));
+	if (err)
+		err = -EFAULT;
+
+	return err;
+}
+
+static int xsdfec_set_default_config(struct xsdfec_dev *xsdfec)
+{
+	/* Ensure registers are aligned with core configuration */
+	xsdfec_regwrite(xsdfec, XSDFEC_FEC_CODE_ADDR, xsdfec->config.code);
+	xsdfec_cfg_axi_streams(xsdfec);
+	update_config_from_hw(xsdfec);
+
+	return 0;
+}
+
 static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 			     unsigned long data)
 {
@@ -849,6 +946,16 @@ static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 
 	xsdfec = container_of(fptr->private_data, struct xsdfec_dev, miscdev);
 
+	/* In failed state allow only reset and get status IOCTLs */
+	if (xsdfec->state == XSDFEC_NEEDS_RESET &&
+	    (cmd != XSDFEC_SET_DEFAULT_CONFIG && cmd != XSDFEC_GET_STATUS &&
+	     cmd != XSDFEC_GET_STATS && cmd != XSDFEC_CLEAR_STATS)) {
+		return -EPERM;
+	}
+
+	if (_IOC_TYPE(cmd) != XSDFEC_MAGIC)
+		return -ENOTTY;
+
 	/* check if ioctl argument is present and valid */
 	if (_IOC_DIR(cmd) != _IOC_NONE) {
 		arg = (void __user *)data;
@@ -857,9 +964,27 @@ static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 	}
 
 	switch (cmd) {
+	case XSDFEC_START_DEV:
+		rval = xsdfec_start(xsdfec);
+		break;
+	case XSDFEC_STOP_DEV:
+		rval = xsdfec_stop(xsdfec);
+		break;
+	case XSDFEC_CLEAR_STATS:
+		rval = xsdfec_clear_stats(xsdfec);
+		break;
+	case XSDFEC_GET_STATS:
+		rval = xsdfec_get_stats(xsdfec, arg);
+		break;
+	case XSDFEC_GET_STATUS:
+		rval = xsdfec_get_status(xsdfec, arg);
+		break;
 	case XSDFEC_GET_CONFIG:
 		rval = xsdfec_get_config(xsdfec, arg);
 		break;
+	case XSDFEC_SET_DEFAULT_CONFIG:
+		rval = xsdfec_set_default_config(xsdfec);
+		break;
 	case XSDFEC_SET_IRQ:
 		rval = xsdfec_set_irq(xsdfec, arg);
 		break;
diff --git a/include/uapi/misc/xilinx_sdfec.h b/include/uapi/misc/xilinx_sdfec.h
index 85ee288..ee1a42ae 100644
--- a/include/uapi/misc/xilinx_sdfec.h
+++ b/include/uapi/misc/xilinx_sdfec.h
@@ -234,6 +234,21 @@ struct xsdfec_config {
 };
 
 /**
+ * struct xsdfec_stats - Stats retrived by ioctl XSDFEC_GET_STATS. Used
+ *			 to buffer atomic_t variables from struct
+ *			 xsdfec_dev. Counts are accumulated until
+ *			 the user clears them.
+ * @isr_err_count: Count of ISR errors
+ * @cecc_count: Count of Correctable ECC errors (SBE)
+ * @uecc_count: Count of Uncorrectable ECC errors (MBE)
+ */
+struct xsdfec_stats {
+	__u32 isr_err_count;
+	__u32 cecc_count;
+	__u32 uecc_count;
+};
+
+/**
  * struct xsdfec_ldpc_param_table_sizes - Used to store sizes of SD-FEC table
  *					  entries for an individual LPDC code
  *					  parameter.
@@ -252,6 +267,32 @@ struct xsdfec_ldpc_param_table_sizes {
  */
 #define XSDFEC_MAGIC 'f'
 /**
+ * DOC: XSDFEC_START_DEV
+ *
+ * @Description
+ *
+ * ioctl to start SD-FEC core
+ *
+ * This fails if the XSDFEC_SET_ORDER ioctl has not been previously called
+ */
+#define XSDFEC_START_DEV _IO(XSDFEC_MAGIC, 0)
+/**
+ * DOC: XSDFEC_STOP_DEV
+ *
+ * @Description
+ *
+ * ioctl to stop the SD-FEC core
+ */
+#define XSDFEC_STOP_DEV _IO(XSDFEC_MAGIC, 1)
+/**
+ * DOC: XSDFEC_GET_STATUS
+ *
+ * @Description
+ *
+ * ioctl that returns status of SD-FEC core
+ */
+#define XSDFEC_GET_STATUS _IOR(XSDFEC_MAGIC, 2, struct xsdfec_status)
+/**
  * DOC: XSDFEC_SET_IRQ
  * @Parameters
  *
@@ -370,4 +411,38 @@ struct xsdfec_ldpc_param_table_sizes {
  * ioctl that determines if SD-FEC is processing data
  */
 #define XSDFEC_IS_ACTIVE _IOR(XSDFEC_MAGIC, 10, bool)
+/**
+ * DOC: XSDFEC_CLEAR_STATS
+ *
+ * @Description
+ *
+ * ioctl that clears error stats collected during interrupts
+ */
+#define XSDFEC_CLEAR_STATS _IO(XSDFEC_MAGIC, 11)
+/**
+ * DOC: XSDFEC_GET_STATS
+ * @Parameters
+ *
+ * @struct xsdfec_stats *
+ *	Pointer to the &struct xsdfec_stats that will contain the updated stats
+ *	values
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core stats
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_GET_STATS _IOR(XSDFEC_MAGIC, 12, struct xsdfec_stats)
+/**
+ * DOC: XSDFEC_SET_DEFAULT_CONFIG
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core to default config, use after a reset
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_DEFAULT_CONFIG _IO(XSDFEC_MAGIC, 13)
+
 #endif /* __XILINX_SDFEC_H__ */
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Dragan Cvetic <dragan.cvetic@xilinx.com>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>,
	<michal.simek@xilinx.com>,
	 <linux-arm-kernel@lists.infradead.org>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>,
	Derek Kiernan <derek.kiernan@xilinx.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH V9 6/8] misc: xilinx_sdfec: Add stats & status ioctls
Date: Sat, 27 Jul 2019 09:33:56 +0100	[thread overview]
Message-ID: <1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com> (raw)
In-Reply-To: <1564216438-322406-1-git-send-email-dragan.cvetic@xilinx.com>

SD-FEC statistic data are:
- count of data interface errors (isr_err_count)
- count of Correctable ECC errors (cecc_count)
- count of Uncorrectable ECC errors (uecc_count)

Add support:
1. clear stats ioctl callback which clears collected
statistic data,
2. get stats ioctl callback which reads a collected
statistic data,
3. set default configuration ioctl callback,
4. start ioctl callback enables SD-FEC HW,
5. stop ioctl callback disables SD-FEC HW.

In a failed state driver enables the following ioctls:
- get status
- get statistics
- clear stats
- set default SD-FEC device configuration

Tested-by: Santhosh Dyavanapally <SDYAVANA@xilinx.com>
Tested by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Tested-by: Derek Kiernan <derek.kiernan@xilinx.com>
Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
---
 drivers/misc/xilinx_sdfec.c      | 125 +++++++++++++++++++++++++++++++++++++++
 include/uapi/misc/xilinx_sdfec.h |  75 +++++++++++++++++++++++
 2 files changed, 200 insertions(+)

diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index 61775c5..45f127a 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -206,6 +206,7 @@ struct xsdfec_clks {
  * @irq: IRQ number
  * @state_updated: indicates State updated by interrupt handler
  * @stats_updated: indicates Stats updated by interrupt handler
+ * @intr_enabled: indicates IRQ enabled
  *
  * This structure contains necessary state for SDFEC driver to operate
  */
@@ -228,6 +229,7 @@ struct xsdfec_dev {
 	int irq;
 	bool state_updated;
 	bool stats_updated;
+	bool intr_enabled;
 };
 
 static inline void xsdfec_regwrite(struct xsdfec_dev *xsdfec, u32 addr,
@@ -289,6 +291,25 @@ static void update_config_from_hw(struct xsdfec_dev *xsdfec)
 		xsdfec->state = XSDFEC_STOPPED;
 }
 
+static int xsdfec_get_status(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+	struct xsdfec_status status;
+	int err;
+
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	status.state = xsdfec->state;
+	xsdfec->state_updated = false;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+	status.activity = (xsdfec_regread(xsdfec, XSDFEC_ACTIVE_ADDR) &
+			   XSDFEC_IS_ACTIVITY_SET);
+
+	err = copy_to_user(arg, &status, sizeof(status));
+	if (err)
+		err = -EFAULT;
+
+	return err;
+}
+
 static int xsdfec_get_config(struct xsdfec_dev *xsdfec, void __user *arg)
 {
 	int err;
@@ -840,6 +861,82 @@ static int xsdfec_dev_release(struct inode *iptr, struct file *fptr)
 	return 0;
 }
 
+static int xsdfec_start(struct xsdfec_dev *xsdfec)
+{
+	u32 regread;
+
+	regread = xsdfec_regread(xsdfec, XSDFEC_FEC_CODE_ADDR);
+	regread &= 0x1;
+	if (regread != xsdfec->config.code) {
+		dev_dbg(xsdfec->dev,
+			"%s SDFEC HW code does not match driver code, reg %d, code %d",
+			__func__, regread, xsdfec->config.code);
+		return -EINVAL;
+	}
+
+	/* Set AXIS enable */
+	xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR,
+			XSDFEC_AXIS_ENABLE_MASK);
+	/* Done */
+	xsdfec->state = XSDFEC_STARTED;
+	return 0;
+}
+
+static int xsdfec_stop(struct xsdfec_dev *xsdfec)
+{
+	u32 regread;
+
+	if (xsdfec->state != XSDFEC_STARTED)
+		dev_dbg(xsdfec->dev, "Device not started correctly");
+	/* Disable AXIS_ENABLE Input interfaces only */
+	regread = xsdfec_regread(xsdfec, XSDFEC_AXIS_ENABLE_ADDR);
+	regread &= (~XSDFEC_AXIS_IN_ENABLE_MASK);
+	xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR, regread);
+	/* Stop */
+	xsdfec->state = XSDFEC_STOPPED;
+	return 0;
+}
+
+static int xsdfec_clear_stats(struct xsdfec_dev *xsdfec)
+{
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	xsdfec->isr_err_count = 0;
+	xsdfec->uecc_count = 0;
+	xsdfec->cecc_count = 0;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+	return 0;
+}
+
+static int xsdfec_get_stats(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+	int err;
+	struct xsdfec_stats user_stats;
+
+	spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+	user_stats.isr_err_count = xsdfec->isr_err_count;
+	user_stats.cecc_count = xsdfec->cecc_count;
+	user_stats.uecc_count = xsdfec->uecc_count;
+	xsdfec->stats_updated = false;
+	spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+	err = copy_to_user(arg, &user_stats, sizeof(user_stats));
+	if (err)
+		err = -EFAULT;
+
+	return err;
+}
+
+static int xsdfec_set_default_config(struct xsdfec_dev *xsdfec)
+{
+	/* Ensure registers are aligned with core configuration */
+	xsdfec_regwrite(xsdfec, XSDFEC_FEC_CODE_ADDR, xsdfec->config.code);
+	xsdfec_cfg_axi_streams(xsdfec);
+	update_config_from_hw(xsdfec);
+
+	return 0;
+}
+
 static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 			     unsigned long data)
 {
@@ -849,6 +946,16 @@ static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 
 	xsdfec = container_of(fptr->private_data, struct xsdfec_dev, miscdev);
 
+	/* In failed state allow only reset and get status IOCTLs */
+	if (xsdfec->state == XSDFEC_NEEDS_RESET &&
+	    (cmd != XSDFEC_SET_DEFAULT_CONFIG && cmd != XSDFEC_GET_STATUS &&
+	     cmd != XSDFEC_GET_STATS && cmd != XSDFEC_CLEAR_STATS)) {
+		return -EPERM;
+	}
+
+	if (_IOC_TYPE(cmd) != XSDFEC_MAGIC)
+		return -ENOTTY;
+
 	/* check if ioctl argument is present and valid */
 	if (_IOC_DIR(cmd) != _IOC_NONE) {
 		arg = (void __user *)data;
@@ -857,9 +964,27 @@ static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
 	}
 
 	switch (cmd) {
+	case XSDFEC_START_DEV:
+		rval = xsdfec_start(xsdfec);
+		break;
+	case XSDFEC_STOP_DEV:
+		rval = xsdfec_stop(xsdfec);
+		break;
+	case XSDFEC_CLEAR_STATS:
+		rval = xsdfec_clear_stats(xsdfec);
+		break;
+	case XSDFEC_GET_STATS:
+		rval = xsdfec_get_stats(xsdfec, arg);
+		break;
+	case XSDFEC_GET_STATUS:
+		rval = xsdfec_get_status(xsdfec, arg);
+		break;
 	case XSDFEC_GET_CONFIG:
 		rval = xsdfec_get_config(xsdfec, arg);
 		break;
+	case XSDFEC_SET_DEFAULT_CONFIG:
+		rval = xsdfec_set_default_config(xsdfec);
+		break;
 	case XSDFEC_SET_IRQ:
 		rval = xsdfec_set_irq(xsdfec, arg);
 		break;
diff --git a/include/uapi/misc/xilinx_sdfec.h b/include/uapi/misc/xilinx_sdfec.h
index 85ee288..ee1a42ae 100644
--- a/include/uapi/misc/xilinx_sdfec.h
+++ b/include/uapi/misc/xilinx_sdfec.h
@@ -234,6 +234,21 @@ struct xsdfec_config {
 };
 
 /**
+ * struct xsdfec_stats - Stats retrived by ioctl XSDFEC_GET_STATS. Used
+ *			 to buffer atomic_t variables from struct
+ *			 xsdfec_dev. Counts are accumulated until
+ *			 the user clears them.
+ * @isr_err_count: Count of ISR errors
+ * @cecc_count: Count of Correctable ECC errors (SBE)
+ * @uecc_count: Count of Uncorrectable ECC errors (MBE)
+ */
+struct xsdfec_stats {
+	__u32 isr_err_count;
+	__u32 cecc_count;
+	__u32 uecc_count;
+};
+
+/**
  * struct xsdfec_ldpc_param_table_sizes - Used to store sizes of SD-FEC table
  *					  entries for an individual LPDC code
  *					  parameter.
@@ -252,6 +267,32 @@ struct xsdfec_ldpc_param_table_sizes {
  */
 #define XSDFEC_MAGIC 'f'
 /**
+ * DOC: XSDFEC_START_DEV
+ *
+ * @Description
+ *
+ * ioctl to start SD-FEC core
+ *
+ * This fails if the XSDFEC_SET_ORDER ioctl has not been previously called
+ */
+#define XSDFEC_START_DEV _IO(XSDFEC_MAGIC, 0)
+/**
+ * DOC: XSDFEC_STOP_DEV
+ *
+ * @Description
+ *
+ * ioctl to stop the SD-FEC core
+ */
+#define XSDFEC_STOP_DEV _IO(XSDFEC_MAGIC, 1)
+/**
+ * DOC: XSDFEC_GET_STATUS
+ *
+ * @Description
+ *
+ * ioctl that returns status of SD-FEC core
+ */
+#define XSDFEC_GET_STATUS _IOR(XSDFEC_MAGIC, 2, struct xsdfec_status)
+/**
  * DOC: XSDFEC_SET_IRQ
  * @Parameters
  *
@@ -370,4 +411,38 @@ struct xsdfec_ldpc_param_table_sizes {
  * ioctl that determines if SD-FEC is processing data
  */
 #define XSDFEC_IS_ACTIVE _IOR(XSDFEC_MAGIC, 10, bool)
+/**
+ * DOC: XSDFEC_CLEAR_STATS
+ *
+ * @Description
+ *
+ * ioctl that clears error stats collected during interrupts
+ */
+#define XSDFEC_CLEAR_STATS _IO(XSDFEC_MAGIC, 11)
+/**
+ * DOC: XSDFEC_GET_STATS
+ * @Parameters
+ *
+ * @struct xsdfec_stats *
+ *	Pointer to the &struct xsdfec_stats that will contain the updated stats
+ *	values
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core stats
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_GET_STATS _IOR(XSDFEC_MAGIC, 12, struct xsdfec_stats)
+/**
+ * DOC: XSDFEC_SET_DEFAULT_CONFIG
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core to default config, use after a reset
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_DEFAULT_CONFIG _IO(XSDFEC_MAGIC, 13)
+
 #endif /* __XILINX_SDFEC_H__ */
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-07-27  8:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-27  8:33 [PATCH V9 0/8] misc: xilinx sd-fec drive Dragan Cvetic
2019-07-27  8:33 ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 1/8] misc: xilinx_sdfec: Store driver config and state Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 2/8] misc: xilinx_sdfec: Add ability to configure turbo Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 3/8] misc: xilinx_sdfec: Add ability to configure LDPC Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 4/8] misc: xilinx_sdfec: Add ability to get/set config Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 5/8] misc: xilinx_sdfec: Support poll file operation Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` Dragan Cvetic [this message]
2019-07-27  8:33   ` [PATCH V9 6/8] misc: xilinx_sdfec: Add stats & status ioctls Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 7/8] Docs: misc: xilinx_sdfec: Add documentation Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic
2019-07-27  8:33 ` [PATCH V9 8/8] MAINTAINERS: add maintainer for SD-FEC Dragan Cvetic
2019-07-27  8:33   ` Dragan Cvetic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com \
    --to=dragan.cvetic@xilinx.com \
    --cc=arnd@arndb.de \
    --cc=derek.kiernan@xilinx.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.