All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yong Mao <yong.mao@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	<linux-mmc@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <srv_heupstream@mediatek.com>,
	yong mao <yong.mao@mediatek.com>
Subject: [PATCH] mmc: mediatek: enable SDIO IRQ low level trigger function
Date: Wed, 28 Aug 2019 17:07:10 +0800	[thread overview]
Message-ID: <1566983230-22481-1-git-send-email-yong.mao@mediatek.com> (raw)

From: yong mao <yong.mao@mediatek.com>

SDIO IRQ is not defaultly triggered by low level,
but by falling edge. It needs to set related register
to enable SDIO IRQ low level trigger function.
Otherwise the SDIO IRQ may be lost in some specail condition.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b63..2444268 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -192,6 +192,7 @@
 #define SDC_STS_CMDBUSY         (0x1 << 1)	/* RW */
 #define SDC_STS_SWR_COMPL       (0x1 << 31)	/* RW */
 
+#define SDC_DAT1_IRQ_TRIGGER	(0x1 << 20)	/* RW */
 /* SDC_ADV_CFG0 mask */
 #define SDC_RX_ENHANCE_EN	(0x1 << 20)	/* RW */
 
@@ -1568,6 +1569,7 @@ static void msdc_init_hw(struct msdc_host *host)
 
 	/* Config SDIO device detect interrupt function */
 	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_set_bits(host->base + SDC_ADV_CFG0, SDC_DAT1_IRQ_TRIGGER);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Yong Mao <yong.mao@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	srv_heupstream@mediatek.com, yong mao <yong.mao@mediatek.com>
Subject: [PATCH] mmc: mediatek: enable SDIO IRQ low level trigger function
Date: Wed, 28 Aug 2019 17:07:10 +0800	[thread overview]
Message-ID: <1566983230-22481-1-git-send-email-yong.mao@mediatek.com> (raw)

From: yong mao <yong.mao@mediatek.com>

SDIO IRQ is not defaultly triggered by low level,
but by falling edge. It needs to set related register
to enable SDIO IRQ low level trigger function.
Otherwise the SDIO IRQ may be lost in some specail condition.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b63..2444268 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -192,6 +192,7 @@
 #define SDC_STS_CMDBUSY         (0x1 << 1)	/* RW */
 #define SDC_STS_SWR_COMPL       (0x1 << 31)	/* RW */
 
+#define SDC_DAT1_IRQ_TRIGGER	(0x1 << 20)	/* RW */
 /* SDC_ADV_CFG0 mask */
 #define SDC_RX_ENHANCE_EN	(0x1 << 20)	/* RW */
 
@@ -1568,6 +1569,7 @@ static void msdc_init_hw(struct msdc_host *host)
 
 	/* Config SDIO device detect interrupt function */
 	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_set_bits(host->base + SDC_ADV_CFG0, SDC_DAT1_IRQ_TRIGGER);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Yong Mao <yong.mao@mediatek.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: srv_heupstream@mediatek.com, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, yong mao <yong.mao@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Chaotian Jing <chaotian.jing@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: mediatek: enable SDIO IRQ low level trigger function
Date: Wed, 28 Aug 2019 17:07:10 +0800	[thread overview]
Message-ID: <1566983230-22481-1-git-send-email-yong.mao@mediatek.com> (raw)

From: yong mao <yong.mao@mediatek.com>

SDIO IRQ is not defaultly triggered by low level,
but by falling edge. It needs to set related register
to enable SDIO IRQ low level trigger function.
Otherwise the SDIO IRQ may be lost in some specail condition.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b63..2444268 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -192,6 +192,7 @@
 #define SDC_STS_CMDBUSY         (0x1 << 1)	/* RW */
 #define SDC_STS_SWR_COMPL       (0x1 << 31)	/* RW */
 
+#define SDC_DAT1_IRQ_TRIGGER	(0x1 << 20)	/* RW */
 /* SDC_ADV_CFG0 mask */
 #define SDC_RX_ENHANCE_EN	(0x1 << 20)	/* RW */
 
@@ -1568,6 +1569,7 @@ static void msdc_init_hw(struct msdc_host *host)
 
 	/* Config SDIO device detect interrupt function */
 	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_set_bits(host->base + SDC_ADV_CFG0, SDC_DAT1_IRQ_TRIGGER);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-08-28  9:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28  9:07 Yong Mao [this message]
2019-08-28  9:07 ` [PATCH] mmc: mediatek: enable SDIO IRQ low level trigger function Yong Mao
2019-08-28  9:07 ` Yong Mao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566983230-22481-1-git-send-email-yong.mao@mediatek.com \
    --to=yong.mao@mediatek.com \
    --cc=chaotian.jing@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.