All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>
Cc: Evan Green <evgreen@chromium.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Tomasz Figa <tfiga@google.com>, Will Deacon <will.deacon@arm.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
	<youlin.pei@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Kaehlcke <mka@chromium.org>, <anan.sun@mediatek.com>,
	<cui.zhang@mediatek.com>, <chao.hao@mediatek.com>,
	<ming-fan.chen@mediatek.com>
Subject: [PATCH v3 00/14] Clean up "mediatek,larb" after adding device_link
Date: Tue, 3 Sep 2019 17:37:22 +0800	[thread overview]
Message-ID: <1567503456-24725-1-git-send-email-yong.wu@mediatek.com> (raw)

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-August/022611.html

Change notes:
v3: 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020440.html
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (13):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  memory: mtk-smi: Use device_is_bound to check if smi-common is ready
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 ------
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c            |  5 ++
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c           |  5 ++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 20 ++++----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 31 ++----------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  2 +-
 drivers/iommu/mtk_iommu.c                          | 56 ++++++++++------------
 drivers/iommu/mtk_iommu_v1.c                       | 49 ++++++++++---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 ---------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 22 ---------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ------------------
 drivers/memory/mtk-smi.c                           | 41 +++++++---------
 include/soc/mediatek/smi.h                         | 20 --------
 25 files changed, 93 insertions(+), 316 deletions(-)

-- 
1.9.1 


WARNING: multiple messages have this Message-ID (diff)
From: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: youlin.pei-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Nicolas Boichat
	<drinkcat-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	cui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	chao.hao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Evan Green <evgreen-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Tomasz Figa <tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
	Matthias Kaehlcke <mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	ming-fan.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	anan.sun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v3 00/14] Clean up "mediatek,larb" after adding device_link
Date: Tue, 3 Sep 2019 17:37:22 +0800	[thread overview]
Message-ID: <1567503456-24725-1-git-send-email-yong.wu@mediatek.com> (raw)

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-August/022611.html

Change notes:
v3: 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020440.html
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (13):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  memory: mtk-smi: Use device_is_bound to check if smi-common is ready
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 ------
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c            |  5 ++
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c           |  5 ++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 20 ++++----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 31 ++----------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  2 +-
 drivers/iommu/mtk_iommu.c                          | 56 ++++++++++------------
 drivers/iommu/mtk_iommu_v1.c                       | 49 ++++++++++---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 ---------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 22 ---------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ------------------
 drivers/memory/mtk-smi.c                           | 41 +++++++---------
 include/soc/mediatek/smi.h                         | 20 --------
 25 files changed, 93 insertions(+), 316 deletions(-)

-- 
1.9.1 

WARNING: multiple messages have this Message-ID (diff)
From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Joerg Roedel <joro@8bytes.org>,  Rob Herring <robh+dt@kernel.org>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
	Nicolas Boichat <drinkcat@chromium.org>,
	cui.zhang@mediatek.com, srv_heupstream@mediatek.com,
	chao.hao@mediatek.com, Will Deacon <will.deacon@arm.com>,
	linux-kernel@vger.kernel.org, Evan Green <evgreen@chromium.org>,
	Tomasz Figa <tfiga@google.com>,
	iommu@lists.linux-foundation.org,
	Matthias Kaehlcke <mka@chromium.org>,
	linux-mediatek@lists.infradead.org, ming-fan.chen@mediatek.com,
	anan.sun@mediatek.com, Robin Murphy <robin.murphy@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/14] Clean up "mediatek,larb" after adding device_link
Date: Tue, 3 Sep 2019 17:37:22 +0800	[thread overview]
Message-ID: <1567503456-24725-1-git-send-email-yong.wu@mediatek.com> (raw)

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-August/022611.html

Change notes:
v3: 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020440.html
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (13):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  memory: mtk-smi: Use device_is_bound to check if smi-common is ready
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 ------
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c            |  5 ++
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c           |  5 ++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 20 ++++----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 31 ++----------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  2 +-
 drivers/iommu/mtk_iommu.c                          | 56 ++++++++++------------
 drivers/iommu/mtk_iommu_v1.c                       | 49 ++++++++++---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 ---------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 22 ---------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ------------------
 drivers/memory/mtk-smi.c                           | 41 +++++++---------
 include/soc/mediatek/smi.h                         | 20 --------
 25 files changed, 93 insertions(+), 316 deletions(-)

-- 
1.9.1 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Joerg Roedel <joro@8bytes.org>,  Rob Herring <robh+dt@kernel.org>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
	Nicolas Boichat <drinkcat@chromium.org>,
	cui.zhang@mediatek.com, srv_heupstream@mediatek.com,
	chao.hao@mediatek.com, Will Deacon <will.deacon@arm.com>,
	linux-kernel@vger.kernel.org, Evan Green <evgreen@chromium.org>,
	Tomasz Figa <tfiga@google.com>,
	iommu@lists.linux-foundation.org,
	Matthias Kaehlcke <mka@chromium.org>,
	linux-mediatek@lists.infradead.org, yong.wu@mediatek.com,
	ming-fan.chen@mediatek.com, anan.sun@mediatek.com,
	Robin Murphy <robin.murphy@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/14] Clean up "mediatek,larb" after adding device_link
Date: Tue, 3 Sep 2019 17:37:22 +0800	[thread overview]
Message-ID: <1567503456-24725-1-git-send-email-yong.wu@mediatek.com> (raw)

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-August/022611.html

Change notes:
v3: 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020440.html
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (13):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  memory: mtk-smi: Use device_is_bound to check if smi-common is ready
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 ------
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c            |  5 ++
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c           |  5 ++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 20 ++++----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 31 ++----------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  2 +-
 drivers/iommu/mtk_iommu.c                          | 56 ++++++++++------------
 drivers/iommu/mtk_iommu_v1.c                       | 49 ++++++++++---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ---------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 ---------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 22 ---------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ------------------
 drivers/memory/mtk-smi.c                           | 41 +++++++---------
 include/soc/mediatek/smi.h                         | 20 --------
 25 files changed, 93 insertions(+), 316 deletions(-)

-- 
1.9.1 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-09-03  9:38 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-03  9:37 Yong Wu [this message]
2019-09-03  9:37 ` [PATCH v3 00/14] Clean up "mediatek,larb" after adding device_link Yong Wu
2019-09-03  9:37 ` Yong Wu
2019-09-03  9:37 ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 01/14] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW Yong Wu
2019-09-03  9:37   ` [PATCH v3 01/14] dt-binding: mediatek: Get rid of mediatek, larb " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 02/14] iommu/mediatek: Add probe_defer for smi-larb Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 03/14] iommu/mediatek: Add device_link between the consumer and the larb devices Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2020-03-05  5:14   ` Nicolas Boichat
2020-03-05  5:14     ` Nicolas Boichat
2020-03-05  5:14     ` Nicolas Boichat
2020-03-05  5:14     ` Nicolas Boichat
2020-03-06  6:59     ` Yong Wu
2020-03-06  6:59       ` Yong Wu
2020-03-06  6:59       ` Yong Wu
2020-03-06  6:59       ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 04/14] memory: mtk-smi: Add device-link between smi-larb and smi-common Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 05/14] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 06/14] media: mtk-mdp: " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 07/14] media: mtk-vcodec: " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
     [not found]   ` <1567503456-24725-8-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-09-05 10:25     ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 08/14] drm/mediatek: " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 09/14] memory: mtk-smi: " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 10/14] iommu/mediatek: Use builtin_platform_driver Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 11/14] memory: mtk-smi: Use device_is_bound to check if smi-common is ready Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 12/14] drm/mediatek: Add pm runtime support for ovl and rdma Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-16  7:55   ` CK Hu
2019-09-16  7:55     ` CK Hu
2019-09-16  7:55     ` CK Hu
2019-09-16  7:55     ` CK Hu
2019-09-03  9:37 ` [PATCH v3 13/14] arm: dts: mediatek: Get rid of mediatek,larb for MM nodes Yong Wu
2019-09-03  9:37   ` [PATCH v3 13/14] arm: dts: mediatek: Get rid of mediatek, larb " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37 ` [PATCH v3 14/14] arm64: dts: mediatek: Get rid of mediatek,larb " Yong Wu
2019-09-03  9:37   ` [PATCH v3 14/14] arm64: dts: mediatek: Get rid of mediatek, larb " Yong Wu
2019-09-03  9:37   ` Yong Wu
2019-09-03  9:37   ` [PATCH v3 14/14] arm64: dts: mediatek: Get rid of mediatek,larb " Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1567503456-24725-1-git-send-email-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=chao.hao@mediatek.com \
    --cc=cui.zhang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ming-fan.chen@mediatek.com \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will.deacon@arm.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.