[PATCH 0/6] arm64: dts: meson-g12: add support for PCIe

[Neil Armstrong <narmstrong@baylibre.com>]

This patchset :
- updates the Amlogic PCI bindings for G12A
- reworks the Amlogic PCIe driver to make use of the
G12a USB3+PCIe Combo PHY instead of directly writing in
the PHY register
- adds the necessary operations to the G12a USB3+PCIe Combo PHY driver
- adds the PCIe Node for G12A, G12B and SM1 SoCs
- adds the commented support for the S922X, A311D and S905D3 based
VIM3 boards.

This patchset has been tested in a A311D VIM3 using a 128Go
TS128GMTE110S NVMe PCIe module.

For indication, here is a bonnie++ run as ext4 formatted:
     ------Sequential Output------ --Sequential Input- --Random-
     -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
  4G 93865  99 312837  96 194487  23 102808  97 415501 21 +++++ +++

Neil Armstrong (6):
  dt-bindings: pci: amlogic,meson-pcie: Add G12A bindings
  PCI: amlogic: Fix probed clock names
  PCI: amlogic: meson: Add support for G12A
  phy: meson-g12a-usb3-pcie: Add support for PCIe mode
  arm64: dts: meson-g12a: Add PCIe node
  arm64: dts: khadas-vim3: add commented support for PCIe

 .../bindings/pci/amlogic,meson-pcie.txt       |  12 +-
 .../boot/dts/amlogic/meson-g12-common.dtsi    |  33 ++++++
 .../amlogic/meson-g12b-a311d-khadas-vim3.dts  |  22 ++++
 .../amlogic/meson-g12b-s922x-khadas-vim3.dts  |  22 ++++
 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   |   4 +
 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    |  22 ++++
 drivers/pci/controller/dwc/pci-meson.c        | 105 ++++++++++++++----
 .../phy/amlogic/phy-meson-g12a-usb3-pcie.c    |  70 ++++++++++--
 8 files changed, 258 insertions(+), 32 deletions(-)

-- 
2.17.1